GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox

 
 
LinkBack Thread Tools Display Modes
Old 02-07-2011, 19:30   #1741 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Full Flash Death 5130 RM-495 Done!


Code:
Failed to read info -> Phone not detected
Scanning avaiable products...
Processing C:\Archivos de programa\Nokia\Phoenix\Products\...
Found 103 products, Filtering BB5 Products - wait...
46 Products left after filtering. Ready.
Retrieving Variants for Product RM-495 (Nokia 5130 XpressMusic) - wait...
402 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm495__07.97.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000296
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		15C00012F93D7F56EE49A5953A49A976F627CBF0
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm495__07.97.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0137FFFF, NOR
EraseArea[0,CMT]: 0x01380000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 86.563s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 55.62s
Flashing Speed: 2772,27 kBit/S
Restarting MCU...
Processing rm495__07.97.mcusw (APE)...
Processing rm495__07.97.ppm_mena_a1 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000296
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		15C00012F93D7F56EE49A5953A49A976F627CBF0
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm495__07.97.ppm_mena_a1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01DBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 32.813s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 19.422s
Flashing Speed: 2695,66 kBit/S
Restarting MCU...
Processing rm495__07.97.ppm_mena_a1 (APE)...
Processing rm495__07.97.image_mena_a1_red (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000296
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		15C00012F93D7F56EE49A5953A49A976F627CBF0
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm495__07.97.image_mena_a1_red, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0C917F11196FDB7378C18EF7260698CA4489DCA0
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01DC0000-0x0215FFFF, NOR
EraseArea[0,CMT]: 0x02160000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 240.250s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 25.734s
Flashing Speed: 3345,17 kBit/S
Restarting MCU...
Processing rm495__07.97.image_mena_a1_red (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version	V 07.97
MCU Date	13-09-10
Product		RM-495 (Nokia 5130 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		354223035282
Mastercode	1262226320
IMEI Spare	3A45220353821206
IMEI SV		3345220353821256F8000000
PPM		V 07.97, 13-09-10, RM-495, (c) Nokia            , MEN
CNT		Content: mena_a1_bd_red, V 07.97, 13-09-10, RM-495, (c) Nokia            
PSN		HGA584575
Product Code	0571951
Module Code	0204024
Basic Product Code	0567772
PSD		0000000000000000
LPSN		0
RETU		16
TAHVO		22
AHNE		30
HW		1000
RFIC		06540601
DSP		ICPR72_10w01
LCD		SEIKO
BT		2222-302
Simlock Server	SIMLOCK SERVER
Simlock Key	2440700000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 02-07-2011, 20:11   #1742 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Thumbs up Full Flash 6300 RM-217 Done!

Code:
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-217_354827017854_07022011_160219.SecurityBlock.PM"
"1FC000036E346E5681685550606F539EDC0F945D.C0001FF6" Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		1FC000036E346E5681685550606F539EDC0F945D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
Storing VARIANT...
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version	V 05.00
MCU Date	27-04-07
Product		RM-217 (Nokia 6300)
Manufacturer	(c) Nokia.           
IMEI		354827017854
Mastercode	20732673
Simlock backup OK, saved to RM-217_354827017854_07022011_160250.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm217__07.30.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		1FC000036E346E5681685550606F539EDC0F945D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm217__07.30.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 63.141s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 69.875s
Flashing Speed: 1740,73 kBit/S
Restarting MCU...
Processing rm217__07.30.mcusw (APE)...
Processing rm217__07.30.ppm_c (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		1FC000036E346E5681685550606F539EDC0F945D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm217__07.30.ppm_c, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 16.750s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 23.234s
Flashing Speed: 1628,61 kBit/S
Restarting MCU...
Processing rm217__07.30.ppm_c (APE)...
Processing rm217__07.30.image_c_tr_white (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000353
CMT_PUBLIC_ID:		1FC000036E346E5681685550606F539EDC0F945D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm217__07.30.image_c_tr_white, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01600000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 48.250s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 14.985s
Flashing Speed: 1786,53 kBit/S
Restarting MCU...
Processing rm217__07.30.image_c_tr_white (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version	V 07.30
MCU Date	07-05-09
Product		RM-217 (Nokia 6300)
Manufacturer	(c) Nokia.           
IMEI		354827017854
Mastercode	20732673
IMEI Spare	3A45280771589403
IMEI SV		3345280771589423F7000000
PPM		V 07.30, 07-05-09, RM-217, (c) Nokia.           , C
PSN		RIL413349
Product Code	0542154
Module Code	0203165
Basic Product Code	0538161
PSD		0000000000000000
RETU		32
TAHVO		53
AHNE		11
HW		2006
RFIC		17211721
DSP		ICPR61_08w10
Failed to read info -> Failed to read extended info
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 02-08-2011, 07:04   #1743 (permalink)
No Life Poster
 
naveedbutt's Avatar
 
Join Date: Apr 2009
Location: HM unlock fone mandi bahauddin
Posts: 2,386
Member: 1015336
Status: Offline
Sonork: 100.1608410
Thanks Meter: 813
1616 flash done with cyclone box

Code:
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.49, (Dec  2 2010 13:37:45, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk27
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0000037
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D000028C
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.11v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.03v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
Internal Box VPP Enabled
VPP Voltage 5.01v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Booting UPP...
Failed to Check DCT4 Flashing Bus -> UPP Not Responding
Booting UPP...
Failed to Check DCT4 Flashing Bus -> UPP Not Responding
Booting UPP...
Failed to Check DCT4 Flashing Bus -> UPP Not Responding
Booting UPP...
Failed to Check DCT4 Flashing Bus -> UPP Not Responding
Processing pre-flash tasks...
Pre-flash tasks finished
Checking rh125_003.610...
28 Blocks Parsed
Flash file sorted Okay.
Booting X-Gold (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[PBL] : SE0_091125  F11
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 460800bps...
Baudrate Accepted (460800bps)
Flash Chip 0x002088C0, ST, Size: 8MBytes
1 file(s) embedded into image.
Processing "hw_f11_rh125_r03.610.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00800000-0x00A0FFFF...
Erasing 0x00C60000-0x00EAFFFF...
Erasing 0x00FFC000-0x00FFFFFF...
Flashing at 0x00800000...
Flashed 2162688 bytes OK
Flashing at 0x00C60000...
Flashed 2074112 bytes OK
Flashing at 0x00FFC000...
Flashed 64 bytes OK
Box VPP disabled
Checking rh1250_nai03.61ij...
26 Blocks Parsed
Flash file sorted Okay.
Booting X-Gold (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[PBL] : SE0_091125  F11
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 460800bps...
Baudrate Accepted (460800bps)
Flash Chip 0x002088C0, ST, Size: 8MBytes
1 file(s) embedded into image.
Processing "hw_f11_rh1250_nai03.61ij.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00EB0000-0x00F7FFFF...
Flashing at 0x00EB0000...
Flashed 352512 bytes OK
Box VPP disabled
Checking rh125_003.61ij...
26 Blocks Parsed
Flash file sorted Okay.
Booting X-Gold (press power-on if used non-battery cable)...
X-Gold: Ready, MCU ID: 0x3400
[PBL] : Ready
[PBL] : SE0_091125  F11
[EBL] : Mode CC
[EBL] : Default_RAM_Bootloader
[EBL] : Ready
Setting Baudrate to 460800bps...
Baudrate Accepted (460800bps)
Flash Chip 0x002088C0, ST, Size: 8MBytes
1 file(s) embedded into image.
Processing "hw_f11_rh125_003.61ij.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x00210000-0x0045FFFF...
Flashing at 0x00210000...
Flashed 2126016 bytes OK
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 02-16-2011 at 14:42. Reason: add Code Tag
 
Old 02-08-2011, 10:14   #1744 (permalink)
No Life Poster
 
k-mobile's Avatar
 
Join Date: Apr 2008
Location: Mauritius Port Louis
Posts: 547
Member: 762522
Status: Offline
Thanks Meter: 156
N73 unlock done

Code:
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.50, (Dec 24 2010 18:30:25, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk27
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C000083E
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D200066A
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	4.84v	PASSED
MCU Voltage	3.30v	PASSED
Core Voltage	1.78v	PASSED
VBAT Voltage	0.56v	PASSED
VBAT Voltage	4.56v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.66v	PASSED
Box VPP disabled
VPP Voltage	0.09v	PASSED
External Box VPP Enabled
VPP Voltage	0.00v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
BB5 Unlock Started...
MCU Version	V 05wk47v38.1
MCU Date	19-01-07
Product		RM-133 (Nokia N73)
Manufacturer	(c) Nokia.  
IMEI		358634012259598
Mastercode	6024345527
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2380600000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	2
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 23806F
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 23806F
Reading Security Block...
Security block OK and saved to "RM-133_358634012259598_272011_21412 AM.SecurityBlock.PM"
WARNING: "173001077EE50154CAFDF000E1EEA42468E67EF2.C000083E" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		724A6791DBABF0C427800ED8BB6561E06B9548D0
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		173001077EE50154CAFDF000E1EEA42468E67EF2
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "173001077EE50154CAFDF000E1EEA42468E67EF2.C000083E"
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+316924968442912+1#
#pw+064174273329264+2#
#pw+030581471778110+3#
#pw+166421737752757+4#
#pw+962278283509154+5#
#pw+002558349356794+6#
#pw+681311994304057+7#
Sending NCK Codes..
NCK[1] - ACCEPTED
NCK[2] - Not locked on given lock level
NCK[3] - Not locked on given lock level
NCK[4] - Not locked on given lock level
NCK[5] - Unlocked Already
NCK[6] - Unlocked Already
NCK[7] - Unlocked Already
MCU Version	V 05wk47v38.1
MCU Date	19-01-07
Product		RM-133 (Nokia N73)
Manufacturer	(c) Nokia.  
IMEI		358634012259598
Mastercode	6024345527
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2380600000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 23806F
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: 23806F
Unlock finished! Time taken 33.15s

Last edited by ptt; 02-16-2011 at 14:42. Reason: add Code Tag
 
Old 02-08-2011, 14:16   #1745 (permalink)
No Life Poster
 
Join Date: Nov 2008
Location: saudi arabia
Posts: 3,840
Member: 904809
Status: Offline
Sonork: 100.1615464
Thanks Meter: 738
7510a, succesfully flashed by cyclone

Code:
MCU Voltage	3.29v	PASSED
Core Voltage	1.79v	PASSED
VBAT Voltage	0.01v	PASSED
VBAT Voltage	5.04v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.99v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.04v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 61 products, Filtering BB5 Products - wait...
26 Products left after filtering. Ready.
Retrieving Variants for Product RM-398 (Nokia 7510 Supernova) - wait...
252 Variants Retrieved
Booting CMT...
Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem
Prepare phone failed with message -> Failed to Boot CMT
Failed to Check BB5 Flashing Bus  -> Failed to Boot / Prepare Phone
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0F800012EA9D7D563241BCE21E6A1CBAEDE5C546
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0F800012EA9D7D563241BCE21E6A1CBAEDE5C546
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm398__06.65.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0F800012EA9D7D563241BCE21E6A1CBAEDE5C546
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm398__06.65.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0023FFFF, NOR
EraseArea[0,CMT]: 0x015A0000-0x0177FFFF, NOR
EraseArea[0,CMT]: 0x00240000-0x0159FFFF, NOR
EraseArea[0,CMT]: 0x02140000-0x025DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 0.765s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT ISA+DYNSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 65.110s
Flashing Speed: 2951.34 kBit/S
Restarting MCU...
Processing rm398__06.65.mcusw (APE)...
Processing rm398__06.65.ppm_ma (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0F800012EA9D7D563241BCE21E6A1CBAEDE5C546
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm398__06.65.ppm_ma, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 34F71CF6D1FC422794671654A7A95308F55F71E6
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01780000-0x0213FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 23.782s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 13.828s
Flashing Speed: 3689.13 kBit/S
Restarting MCU...
Processing rm398__06.65.ppm_ma (APE)...
Processing rm398__06.65.image_ma_sa (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006030C192101033000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0F800012EA9D7D563241BCE21E6A1CBAEDE5C546
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm398__06.65.image_ma_sa, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0089898200008A31, Intel, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit (Forcing OLD Protocol)
FlashChip 0x00898982 (Intel), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 34F71CF6D1FC422794671654A7A95308F55F71E6
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x025E0000-0x0297FFFF, NOR
EraseArea[0,CMT]: 0x02980000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 151.969s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 20.922s
Flashing Speed: 3713.13 kBit/S
Restarting MCU...
Processing rm398__06.65.image_ma_sa (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version	V 06.65
MCU Date	04-06-09
Product		RM-398 (Nokia 7510 Supernova)
Manufacturer	(c) Nokia            
IMEI		356394023950824
Mastercode	2212744474
IMEI Spare	3A65930432598002
IMEI SV		3365930432598022F1000000
PPM		V 06.65, 04-06-09, RM-398, (c) Nokia            , MA
CNT		Content: ma_sa, V 06.65, 04-06-09, RM-398, (c) Nokia            , 
PSN		DVE873154
Product Code	0568971
Module Code	0203793
Basic Product Code	0555852
PSD		0000000000000000
LPSN		0
RETU		15
TAHVO		22
AHNE		30
HW		1001
RFIC		0800
DSP		ICPR81_09w10_pre
LCD		SEIKO
BT		410B-v170
Simlock Server	SIMLOCK SERVER
Simlock Key	2440700000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 02-16-2011 at 14:42. Reason: add Code Tag
 
Old 02-09-2011, 10:48   #1746 (permalink)
No Life Poster
 
k-mobile's Avatar
 
Join Date: Apr 2008
Location: Mauritius Port Louis
Posts: 547
Member: 762522
Status: Offline
Thanks Meter: 156
2680 unlock done

Code:
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.50, (Dec 24 2010 18:30:25, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk27
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C000083E
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D200066A
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	4.83v	PASSED
MCU Voltage	3.30v	PASSED
Core Voltage	1.77v	PASSED
VBAT Voltage	0.01v	PASSED
VBAT Voltage	4.71v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.66v	PASSED
Box VPP disabled
VPP Voltage	0.09v	PASSED
External Box VPP Enabled
VPP Voltage	0.00v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
MCU Version	V 05.28
MCU Date	05-11-08
Product		RM-392 (Nokia 2680S/2680S-2B)
Manufacturer	(c) Nokia            
IMEI		356874028177507
Mastercode	6621205755
Proceeding with RSA Unlock...
Setting Local Mode...
Failed to set Local Mode, Trying to unlock anyway...
Asic		11
HW Signature	22F06809EE209C6E
Simlock Server	SIMLOCK SERVER
Simlock Key	2081000000000000
Simlock Profile	800000000003000B
Simlock Aux	000B5555
Simlock IMEI	00553568740281775000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 20810F
Simlock [2,1]	State: CLOSED	Type: MCC-MNC	Data: 64710F
Asking card to sign HW Signature...
Signed OK (F12612DF99C94FA09B7D5C24D7B0446D4804CBC8)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

Last edited by ptt; 02-16-2011 at 14:43. Reason: add Code Tag
 
Old 02-09-2011, 14:03   #1747 (permalink)
No Life Poster
 
naveedbutt's Avatar
 
Join Date: Apr 2009
Location: HM unlock fone mandi bahauddin
Posts: 2,386
Member: 1015336
Status: Offline
Sonork: 100.1608410
Thanks Meter: 813
5310c flash ok with cyclone box

Code:
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.49, (Dec  2 2010 13:37:45, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk27
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0000037
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D000028C
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.13v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.83v PASSED
VBAT Voltage 1.46v PASSED
VBAT Voltage 4.83v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  11F0010A9D4F7F5665D30094B7ACE67C281BF57D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm303__10.10.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  11F0010A9D4F7F5665D30094B7ACE67C281BF57D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__10.10.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 4.891s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 184.328s
Flashing Speed: 776.95 kBit/S
Restarting MCU...
Processing rm303__10.10.mcusw (APE)...
Processing rm303__10.10.ppm_v (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  11F0010A9D4F7F5665D30094B7ACE67C281BF57D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__10.10.ppm_v, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 14.422s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 69.828s
Flashing Speed: 755.41 kBit/S
Restarting MCU...
Processing rm303__10.10.ppm_v (APE)...
Processing rm303__10.10.image_v_whitemica_silver (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:  00000295
CMT_EM_ASIC_ID:  00000B22
CMT_PUBLIC_ID:  11F0010A9D4F7F5665D30094B7ACE67C281BF57D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm303__10.10.image_v_whitemica_silver, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 108.563s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 97.625s
Flashing Speed: 860.28 kBit/S
Restarting MCU...
Processing rm303__10.10.image_v_whitemica_silver (APE)...
All images processed OK! Processing post flash tasks...

Last edited by ptt; 02-16-2011 at 14:43. Reason: add Code Tag
 
Old 02-09-2011, 15:08   #1748 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Unlock 2760b RM-259 V 6.82 Done!

Code:
MCU Version	V 06.82
MCU Date	26-09-08
Product		RM-259 (Nokia 2760 (Americas) CABLE 2760)
Manufacturer	(c) Nokia
IMEI		011598009037
Mastercode	5741506671
Proceeding with RSA Unlock...
Setting Local Mode...
Local mode Set
Asic		11
HW Signature	6F7B46BB96E782DA
Simlock Server	SIMLOCK SERVER
Simlock Key	7223400000000000
Simlock Profile	800000000001000B
Simlock Aux	000B5555
Simlock IMEI	00550115980090371100
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 72234F
Asking card to sign HW Signature...
Signed OK (0CBD16C6AD94DFF139ABD41D69E4A2B0B2AA5745)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
 
Old 02-09-2011, 15:25   #1749 (permalink)
No Life Poster
 
Join Date: Nov 2008
Location: saudi arabia
Posts: 3,840
Member: 904809
Status: Offline
Sonork: 100.1615464
Thanks Meter: 738
Thumbs up n8 full flash with usb so fast

Code:
USB Voltage 4.83v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 1.34v PASSED
VBAT Voltage 4.89v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.92v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 63 products, Filtering BB5 Products - wait...
28 Products left after filtering. Ready.
Retrieving Variants for Product RM-596 (Nokia N8) - wait...
1 Variants Retrieved
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia N8-00 USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-596_352684043693915_292011_52045 PM.SecurityBlock.PM"
WARNING: "1E100208A3A403448484A9BB7483A921B2D1EEC5.C0000ED7" Not Exists, Will read it...
Reading CYC file from phone...
Prepare phone failed with message -> USB Loaders are not exploitable!
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
[Nokia N8-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia N8-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID:  00000C35
CMT_EM_ASIC_ID:  00000C30
CMT_PUBLIC_ID:  1E100208A3A403448484A9BB7483A921B2D1EEC5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.34.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FEC
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC005000000031, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0050 (Samsung), Size: 512MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.34.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D172C32473AE199B213465ABB3853246F9631231
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
[Nokia N8-00 USB Phonet]: Port opened OK!
MCU Version V 92PS1_10w34.3
MCU Date 10-09-10
Product  RM-596 (Nokia N8)
Manufacturer (c) Nokia
IMEI  352684043693915
Mastercode 3745732265
Simlock backup OK, saved to RM-596_352684043693915_292011_52105 PM.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-596_011.012_79.92_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia N8-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID:  00000C35
CMT_EM_ASIC_ID:  00000C30
CMT_PUBLIC_ID:  1E100208A3A403448484A9BB7483A921B2D1EEC5
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-596_011.012_79.92_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.34.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FEC
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC005000000031, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0050 (Samsung), Size: 512MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.34.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D172C32473AE199B213465ABB3853246F9631231
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x00DC0000-0x0E97FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.313s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 20.875s
Flashing Speed: 51787.94 kBit/S
Processing RM-596_011.012_79.92_prd.core.fpsx (APE)...
Processing RM-596_011.012_10.01_Hebrew_79.92_prd.rofs2.fpsx (CMT)...
RM-596_011.012_10.01_Hebrew_79.92_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D172C32473AE199B213465ABB3853246F9631231
Started group flash erase
EraseArea[0,CMT]: 0x09F40000-0x0DA7FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.344s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 6.594s
Flashing Speed: 52433.45 kBit/S
Processing RM-596_011.012_10.01_Hebrew_79.92_prd.rofs2.fpsx (APE)...
Processing RM-596_011.012_00.01_79.92_prd.rofs3.fpsx (CMT)...
RM-596_011.012_00.01_79.92_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D172C32473AE199B213465ABB3853246F9631231
Started group flash erase
EraseArea[0,CMT]: 0x0DA80000-0x0E97FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.94s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.125s
Flashing Speed: 445.89 kBit/S
Processing RM-596_011.012_00.01_79.92_prd.rofs3.fpsx (APE)...
Processing RM-596_011.012_U01.01_79.92_prd.uda.fpsx (CMT)...
RM-596_011.012_U01.01_79.92_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: D172C32473AE199B213465ABB3853246F9631231
Started group flash erase
EraseArea[0,CMT]: 0x0EA00000-0x1EFFFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 1.485s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 7.891s
Flashing Speed: 53544.37 kBit/S
Processing RM-596_011.012_U01.01_79.92_prd.uda.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia N8-00 USB Phonet]: Port opened OK!
[Nokia N8-00 USB Phonet]: Port opened OK!
[Nokia N8-00 USB Phonet]: Port opened OK!
[Nokia N8-00 USB Phonet]: Port opened OK!
[Nokia N8-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia N8-00 USB Phonet]: Port opened OK!
MCU Version V 92PS1_10w34.3
MCU Date 10-09-10
Product  RM-596 (Nokia N8)
Manufacturer (c) Nokia
IMEI  352684043693915
Mastercode 3745732265
IMEI Spare 3A25860434969301
IMEI SV  3325860434969301F4000000
PSN  CBM339628
Product Code 059D110
Basic Product Code 0596827
PSD  0000000000000000
LPSN  0
WLAN MAC 1814564645B3
APE SW  011.012
APE Variant 011.012.00.01011.012.10.01011.012.00.01
APE Test  rm596_ENO_2010wk34v136
APE HW  256
APE ADSP 256
APE BT  HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
RETU  35
TAHVO  00
AHNE  11
HW  7100
RFIC  |Alli_4.3.4
DSP  TB92PS1_10w34.1
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 02-16-2011 at 16:13. Reason: add Code Tag
 
The Following 2 Users Say Thank You to alkhaleejmobile For This Useful Post:
Old 02-09-2011, 16:17   #1750 (permalink)
No Life Poster
 
Join Date: Jun 2005
Location: Ghana
Age: 40
Posts: 2,005
Member: 153893
Status: Offline
Thanks Meter: 266
Sucessfully flash 6700c with usb using cyclone box

here is the logs

Code:
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.49, (Dec  2 2010 13:37:45, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk27
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C000356E
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Initializing security card...
Card Serial Number: D90000AA
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	5.02v	PASSED
MCU Voltage	3.28v	PASSED
Core Voltage	1.78v	PASSED
VBAT Voltage	1.45v	PASSED
VBAT Voltage	4.97v	PASSED
Box VPP disabled
VPP Voltage	0.02v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.92v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.04v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102011104
CMT_EM_ASIC_ID:		00000C34
CMT_EM_ASIC_ID:		00000C30
CMT_PUBLIC_ID:		2B400102796B0E4977974472C24EF727E97D778D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC:	3E273BF6
CMT_SECURE_ROM_CRC:	37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.34.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FEC
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0098004000000031, Toshiba, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00980040 (Toshiba), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.34.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm470__13.10.mcusw (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102011104
CMT_EM_ASIC_ID:		00000C34
CMT_EM_ASIC_ID:		00000C30
CMT_PUBLIC_ID:		2B400102796B0E4977974472C24EF727E97D778D
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC:	3E273BF6
CMT_SECURE_ROM_CRC:	37BE26FA
CMT Ready!
rm470__13.10.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.34.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FEC
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0098004000000031, Toshiba, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00980040 (Toshiba), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.34.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND
EraseArea[0,CMT]: 0x000A0000-0x0041FFFF, ONENAND
EraseArea[0,CMT]: 0x00420000-0x0069FFFF, ONENAND
EraseArea[0,CMT]: 0x006A0000-0x01F1FFFF, ONENAND
EraseArea[0,CMT]: 0x02900000-0x02FBFFFF, ONENAND
EraseArea[0,CMT]: 0x0F2C0000-0x0F8BFFFF, ONENAND
Erase Partition (CMT)
Erase Partition (CMT)
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.156s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT MCUSW Certificate...
Writing CMT ISA+DYNSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 5.921s
Flashing Speed: 35710.79 kBit/S
Processing rm470__13.10.mcusw (APE)...
Processing rm470__13.10.ppm_i (CMT)...
rm470__13.10.ppm_i, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x01F20000-0x028FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.203s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 1.203s
Flashing Speed: 44489.05 kBit/S
Processing rm470__13.10.ppm_i (APE)...
Processing rm470__13.10_ISM_011.image_i_ru_gold (CMT)...
rm470__13.10_ISM_011.image_i_ru_gold, Type: Flash Image, Algo: BB5, XSR 1.6
PAPUBKEYS Hash for CMT: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x02FC0000-0x0F2BFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 3.625s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 3.406s
Flashing Speed: 63399.14 kBit/S
Processing rm470__13.10_ISM_011.image_i_ru_gold (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...

Last edited by ptt; 02-16-2011 at 16:18. Reason: add Code Tag
 
Old 02-09-2011, 17:23   #1751 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Full Flash N73 RM-132 Done!

Code:
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Simlock Store not supported, not a PA_SL2 Phone
WMDRM Store not supported
Reading Security Block...
Security block OK and saved to "RM-132_354804014529_09022011_130853.SecurityBlock.PM"
"1030020C7A7A0254F7B71BB3D65AA76497335CCB.C0001FF6" Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		94BE152B6828962916C2227DAC834B91217CCCB2
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1030020C7A7A0254F7B71BB3D65AA76497335CCB
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Storing NPC...
CMT CCC Not Found
CMT HWC Not Found
Storing VARIANT...
Processing APE Part...
Storing Product Code...
Storing PSN...
Storing HWID...
APE NPC Not Found
APE CCC Not Found
APE HWC Not Found
APE VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version	V 05wk47v51.4
MCU Date	29-08-07
Product		RM-132 (Nokia N73)
Manufacturer	(c) Nokia.  
IMEI		354804014529
Mastercode	6616656265
Simlock backup OK, saved to RM-132_354804014529_09022011_130932.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing N73_4.0839.42.1.1_western_C00_PRD_cc.fpsx (CMT)...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		94BE152B6828962916C2227DAC834B91217CCCB2
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1030020C7A7A0254F7B71BB3D65AA76497335CCB
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
N73_4.0839.42.1.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007318D1, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 43.703s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT ADL Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 36.625s
Flashing Speed: 10587,42 kBit/S
Restarting MCU...
Processing N73_4.0839.42.1.1_western_C00_PRD_cc.fpsx (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		94BE152B6828962916C2227DAC834B91217CCCB2
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1030020C7A7A0254F7B71BB3D65AA76497335CCB
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
N73_4.0839.42.1.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1  ALG
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0007FFFF, NAND
EraseArea[0,APE]: 0x00080000-0x000FFFFF, NAND
EraseArea[0,APE]: 0x00100000-0x0025FFFF, NAND
EraseArea[0,APE]: 0x003C0000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 1.47s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS*UPDAPP Certificate...
Writing APE SOS+UZIP Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE PASUBTOC Certificate...
Writing APE ADL Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE SOS*CORE Certificate...
Writing APE SOS+ROFS Certificate...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 63.203s
Flashing Speed: 6135,22 kBit/S
Restarting MCU...
Processing N73_rofx_4.0839.42.1.1_PRD.V19 (CMT)...
Processing N73_rofx_4.0839.42.1.1_PRD.V19 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		94BE152B6828962916C2227DAC834B91217CCCB2
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1030020C7A7A0254F7B71BB3D65AA76497335CCB
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
N73_rofx_4.0839.42.1.1_PRD.V19, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.281s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 30.266s
Flashing Speed: 3703,45 kBit/S
Restarting MCU...
Processing N73_userarea_4.0839.42.1.1.U01 (CMT)...
Processing N73_userarea_4.0839.42.1.1.U01 (APE)...
Booting CMT...
APE_SYSTEM_ASIC_ID:	17100708
APE_ASIC_MODE_ID:	00
APE_PUBLIC_ID:		94BE152B6828962916C2227DAC834B91217CCCB2
APE_ROOT_KEY_HASH:	49A97E826B93BA20B7ED0B082475C00500000000
APE_BOOT_ROM_CRC:	1DFD6613
APE_SECURE_ROM_CRC:	2C872FD4
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		1030020C7A7A0254F7B71BB3D65AA76497335CCB
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
N73_userarea_4.0839.42.1.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1  ALG, BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Searching for BootCode: DualLine 32Bit
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1  ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.625s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 8.515s
Flashing Speed: 5043,71 kBit/S
Restarting MCU...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version	V 05wk47v61.3
MCU Date	14-07-08
Product		RM-132 (Nokia N73)
Manufacturer	(c) Nokia.  
IMEI		354804014529
Mastercode	6616656265
IMEI Spare	3A45080441256908
IMEI SV		3345080441256978F8000000
PSN		CDE651693
Product Code	0542724
Module Code	0202856
Basic Product Code	0545048
PSD		0000001D00000000
RETU		15
TAHVO		22
AHNE		30
HW		7200
RFIC		17211721
DSP		scarfe_05wk46v50P1
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2440700000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 02-09-2011, 17:54   #1752 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Full Flash 5310 RM-303 Done!

Code:
MCU Version	V 03.63
MCU Date	24-10-07
Product		RM-303 (Nokia 5310 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		352062020324
Mastercode	7537706515
IMEI Spare	3A25600202233400
IMEI SV		3325600202233410F2000000
PPM		V 03.63, 24-10-07, RM-303, (c) Nokia            , L
CNT		Content: red_l Claro v1, 26-11-07, RM-303, (c) Nokia, 
PSN		GAI315038
Product Code	0558970
Module Code	0203414
Basic Product Code	0544850
PSD		0000000000000000
LPSN		0
RETU		15
TAHVO		22
AHNE		30
HW		5001
RFIC		064c0609
DSP		07w15pb_07w40.3
LCD		SEIKO
BT		2222-101B
Simlock Server	SIMLOCK SERVER
Simlock Key	7240500000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 72405F
Simlock NCK	#pw+031930398591842+7#
Scanning avaiable products...
Processing C:\Archivos de programa\Nokia\Phoenix\Products\...
Found 103 products, Filtering BB5 Products - wait...
46 Products left after filtering. Ready.
Retrieving Variants for Product RM-303 (Nokia 5310 XpressMusic) - wait...
250 Variants Retrieved
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Not Found
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-303_352062020324_09022011_134351.SecurityBlock.PM"
WARNING: "0720020202720254F061A17D8B819C1DBAA503DE.C0001FF6" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "0720020202720254F061A17D8B819C1DBAA503DE.C0001FF6"
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Backing up simlock...
MCU Version	V 03.63
MCU Date	24-10-07
Product		RM-303 (Nokia 5310 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		352062020324
Mastercode	7537706515
Simlock backup OK, saved to RM-303_352062020324_09022011_134437.SLBackup.PM
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm303__10.10.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm303__10.10.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x010DFFFF, NOR
EraseArea[0,CMT]: 0x010E0000-0x0121FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 47.969s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 108.531s
Flashing Speed: 1319,56 kBit/S
Restarting MCU...
Processing rm303__10.10.mcusw (APE)...
Processing rm303__10.10.ppm_c (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm303__10.10.ppm_c, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01220000-0x0189FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 13.391s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 38.937s
Flashing Speed: 1323,10 kBit/S
Restarting MCU...
Processing rm303__10.10.ppm_c (APE)...
Processing rm303__10.10.image_c_whitemica_silver (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101013000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		0720020202720254F061A17D8B819C1DBAA503DE
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm303__10.10.image_c_whitemica_silver, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 3E96DE4212587183E5E16BB2C79692A53C19875D
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x018A0000-0x01B1FFFF, NOR
EraseArea[0,CMT]: 0x01B20000-0x03FBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 110.687s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 68.890s
Flashing Speed: 1081,97 kBit/S
Restarting MCU...
Processing rm303__10.10.image_c_whitemica_silver (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version	V 10.10
MCU Date	23-03-09
Product		RM-303 (Nokia 5310 XpressMusic)
Manufacturer	(c) Nokia            
IMEI		352062020324
Mastercode	7537706515
IMEI Spare	3A25600202233400
IMEI SV		3325600202233470F6000000
PPM		V 10.10, 23-03-09, RM-303, (c) Nokia            , C
CNT		Content: c_whitemica_silver, V 10.10, 23-03-09, RM-303, (c) Nokia            , 
PSN		GAI315038
Product Code	0558970
Module Code	0203414
Basic Product Code	0544850
PSD		0000000000000000
LPSN		0
RETU		15
TAHVO		22
AHNE		30
HW		5001
RFIC		064c0609
DSP		ICPR71_09w03
LCD		SEIKO
BT		2222-143
Simlock Server	SIMLOCK SERVER
Simlock Key	7240500000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 72405F
Simlock NCK	#pw+031930398591842+7#
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 02-11-2011, 12:51   #1753 (permalink)
No Life Poster
 
k-mobile's Avatar
 
Join Date: Apr 2008
Location: Mauritius Port Louis
Posts: 547
Member: 762522
Status: Offline
Thanks Meter: 156
2220s unlock done

Code:
MCU Version	V 10.25
MCU Date	30-07-10
Product		RM-590 (Nokia RM-590)
Manufacturer	(c) Nokia            
IMEI		354853045948225
Mastercode	4540105777
Proceeding with RSA Unlock...
Setting Local Mode...
Local mode Set
Asic		11
HW Signature	C0D568316956841A
Simlock Server	SIMLOCK SERVER
Simlock Key	2720100000000000
Simlock Profile	800000000003000B
Simlock Aux	000B5555
Simlock IMEI	00553548530459482200
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 27201F
Asking card to sign HW Signature...
Signed OK (24E3FEEF900C719B2450A8FFA44E7B22E82EB69B)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

Last edited by ptt; 02-16-2011 at 14:44. Reason: add Code Tag
 
Old 02-12-2011, 16:29   #1754 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Full Flash Death 6131 RM-115 Done!

Code:
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm115__06.60.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000352
CMT_PUBLIC_ID:		2260000F9C3D0058AC23BC1DD92D13FF922381A9
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm115__06.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x002DFFFF, NOR
EraseArea[0,CMT]: 0x002E0000-0x00EDFFFF, NOR
EraseArea[0,CMT]: 0x00EE0000-0x00EF7FFF, NOR
EraseArea[0,CMT]: 0x00EF8000-0x00EFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.485s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Block Write Failed -> Failed to write CMT cert data (3), Programming Status Error
Processing Flash Image Failed -> Failed to write all blocks
Failed to Process all Image files -> Failed to process rm115__06.60.mcusw
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing rm115__06.60.mcusw (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000352
CMT_PUBLIC_ID:		2260000F9C3D0058AC23BC1DD92D13FF922381A9
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm115__06.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
Warning: PAPUBKEYS Hash Missing!
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x002DFFFF, NOR
EraseArea[0,CMT]: 0x002E0000-0x00EDFFFF, NOR
EraseArea[0,CMT]: 0x00EE0000-0x00EF7FFF, NOR
EraseArea[0,CMT]: 0x00EF8000-0x00EFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 3.657s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 91.703s
Flashing Speed: 1188,96 kBit/S
Restarting MCU...
Processing rm115__06.60.mcusw (APE)...
Processing rm115__06.60.ppm_c (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000352
CMT_PUBLIC_ID:		2260000F9C3D0058AC23BC1DD92D13FF922381A9
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm115__06.60.ppm_c, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A8192FC6AD7BF7A1A4419A3953F3856B1F3F7D4A
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x00F00000-0x0145FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 21.375s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 21.765s
Flashing Speed: 1639,68 kBit/S
Restarting MCU...
Processing rm115__06.60.ppm_c (APE)...
Processing rm115__06.60.image_movi_es_games (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
CMT_EM_ASIC_ID:		00000232
CMT_EM_ASIC_ID:		00000352
CMT_PUBLIC_ID:		2260000F9C3D0058AC23BC1DD92D13FF922381A9
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	191EC665
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
rm115__06.60.image_movi_es_games, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x0001002F (AMD), Size: 32MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A8192FC6AD7BF7A1A4419A3953F3856B1F3F7D4A
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01460000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 61.656s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 34.843s
Flashing Speed: 1627,02 kBit/S
Restarting MCU...
Processing rm115__06.60.image_movi_es_games (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version	V 06.60
MCU Date	30-07-07
Product		RM-115 (Nokia 6131)
Manufacturer	(c) Nokia.           
IMEI		35977000948
Mastercode	526643137
IMEI Spare	3A95770090848207
IMEI SV		3395770090848207F8000000
PPM		V 06.60, 30-07-07, RM-115, (c) Nokia.           , C
PSN		RJI766539
Product Code	0534195
Module Code	0202802
Basic Product Code	0526012
PSD		0000001D00000000
RETU		32
TAHVO		52
AHNE		11
HW		3009
RFIC		17211721
DSP		dsp_mojito_05w46v50.1
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2440700000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
Old 02-12-2011, 17:24   #1755 (permalink)
No Life Poster
 
dapx's Avatar
 
Join Date: Jun 2009
Location: Paraguay
Posts: 778
Member: 1064967
Status: Offline
Thanks Meter: 131
Thumbs up Unlock 6500s RM-240 Done!

Code:
MCU Version	V 06.60
MCU Date	07-03-08
Product		RM-240 (Nokia 6500 slide)
Manufacturer	(c) Nokia            
IMEI		35483702822
Mastercode	527766114
IMEI Spare	3A45380782223702
IMEI SV		3345380782223732F3000000
PPM		V 06.60, 07-03-08, RM-240, (c) Nokia            , COR
CNT		Content: ora_es, V 06.60, 07-03-08, RM-240, (c) Nokia            , , 
PSN		CTG399071
Product Code	0556254
Module Code	0203327
Basic Product Code	0543753
PSD		0000000000000000
LPSN		0
RETU		15
TAHVO		22
AHNE		30
HW		1003
RFIC		17141715
DSP		ICPR71_08w09
LCD		SHARP
BT		2222-143
Simlock Server	SIMLOCK SERVER
Simlock Key	2140300000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 21403F
BB5 Unlock Started...
MCU Version	V 06.60
MCU Date	07-03-08
Product		RM-240 (Nokia 6500 slide)
Manufacturer	(c) Nokia            
IMEI		35483702822
Mastercode	527766114
Simlock Server	SIMLOCK SERVER
Simlock Key	2140300000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: CLOSED	Type: MCC-MNC	Data: 21403F
Reading Security Block...
Security block OK and saved to "RM-240_35483702822_12022011_132221.SecurityBlock.PM"
WARNING: "080002129B9E0254A23C1361EE5B8F11B09349FF.C0001FF6" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		00000295
CMT_EM_ASIC_ID:		00000B22
CMT_PUBLIC_ID:		080002129B9E0254A23C1361EE5B8F11B09349FF
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC:	273F6D55
CMT_SECURE_ROM_CRC:	DFAAF68F
CMT Ready!
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Old Loader Detected
Readed OK, Saving to "080002129B9E0254A23C1361EE5B8F11B09349FF.C0001FF6"
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
#pw+628036233976441+1#
#pw+751676657070836+2#
#pw+434433806715589+3#
#pw+117930282809439+4#
#pw+521297782481833+5#
#pw+589494584775761+6#
#pw+053810574669896+7#
Sending NCK Codes..
NCK[1] - ACCEPTED
NCK[2] - Too fast between tries (bruteforce protection)
NCK[3] - Too fast between tries (bruteforce protection)
NCK[4] - Too fast between tries (bruteforce protection)
NCK[5] - Too fast between tries (bruteforce protection)
NCK[6] - Too fast between tries (bruteforce protection)
NCK[7] - Too fast between tries (bruteforce protection)
MCU Version	V 06.60
MCU Date	07-03-08
Product		RM-240 (Nokia 6500 slide)
Manufacturer	(c) Nokia            
IMEI		35483702822
Mastercode	527766114
Simlock Server	SIMLOCK SERVER
Simlock Key	2140300000000000
Simlock Profile	8000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: 21403F
Simlock NCK	#pw+628036233976441+1#
Unlock finished! Time taken 29.906s
 
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
POST HERE all Successfull Report with Micro-Box, HTC cable, etc.. hitibiti Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...) 2837 07-05-2020 10:10
Put in this thread all successfull story of Dct4 Imei???? with Mxkey mobilecitycbk MXKEY Nokia Flasher and Unlocker (by Alim Hape) 1 06-17-2009 21:28
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box FullFLASHgSMPH Cyclonebox 2 04-13-2009 14:00

 



All times are GMT +1. The time now is 05:11.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.65866 seconds with 10 queries

SEO by vBSEO