GSM Shop  
GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cyclonebox


 
 
LinkBack Thread Tools Display Modes
Old 04-17-2009, 08:31   #16 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
6300 flashed ok


Code:
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 3.719s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm217__07.21.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 91.500s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 143.984s
Restarting MCU...
Processing rm217__07.21.mcusw (APE)...
Processing rm217__07.21.ppm_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.ppm_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x015FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 24.593s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 33.500s
Restarting MCU...
Processing rm217__07.21.ppm_mea4 (APE)...
Processing rm217__07.21.image_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 05000104BD736B56560528078769B28F22F1B693
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm217__07.21.image_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC22FE00006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Started group flash erase
EraseArea[0,CMT]: 0x01600000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 60.813s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 41.657s
Restarting MCU...
Processing rm217__07.21.image_mea4 (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.21
MCU Date 05-11-08
Product RM-217
Manufacturer (c) Nokia. 
IMEI 356437019395759
IMEI Spare 3A65340791937505
IMEI SV 3365340791937525F5000000
PPM V 07.21, 05-11-08, RM-217, (c) Nokia. , MEA
CNT Content: mea4, V 07.21, 05-11-08, RM-217, (c) Nokia. , 
PSN DEG142992
Product Code 0537632
Module Code 0203166
Basic Product Code 0537040
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 1002
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:00. Reason: add code tag
 
Old 04-17-2009, 08:31   #17 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
5200 flashed ok

Code:
MCU Version V 04.71
MCU Date 28-02-07
Product RM-174
Manufacturer (c) Nokia. 
IMEI 1, 28-02-07, RM-174, (c) Nokia. 
IMEI Spare 33353535333730313837373230323200
IMEI SV 3A55350781770202
ESN OTP 3U5w
PPM V 04.71, 28-02-07, RM-174, (c) Nokia. , MEA
CNT Content: mea2, V 04.71, 28-02-07, RM-174, (c) Nokia. , 
PSN DKD076704
Product Code 0541037
Module Code 0203053
Basic Product Code 0530542
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 2002
RFIC 17211721
DSP pb06w14v33
BT 06cc-P8.0
ADSP Sw 06cc-P8.0
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.0s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm174__06.20.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 42.719s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 426.453s
Restarting MCU...
Processing rm174__06.20.mcusw (APE)...
Processing rm174__06.20.ppm_rcm (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.ppm_rcm, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x014FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 8.266s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 125.47s
Restarting MCU...
Processing rm174__06.20.ppm_rcm (APE)...
Processing rm174__06.20.image_opv_cmcc (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 19B00201C39C605606DB3CDA871096EACFADF227
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm174__06.20.image_opv_cmcc, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
Started group flash erase
EraseArea[0,CMT]: 0x01500000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 30.703s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 193.906s
Restarting MCU...
Processing rm174__06.20.image_opv_cmcc (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 06.20
MCU Date 18-03-08
Product RM-174
Manufacturer (c) Nokia. 
IMEI 355537018772022
IMEI Spare 3A55350781770202
IMEI SV 3355350781770212F8000000
PPM V 06.20, 18-03-08, RM-174, (c) Nokia. , RCM
PSN DKD076704
Product Code 0541037
Module Code 0203053
Basic Product Code 0530542
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 2002
RFIC 17211721
DSP ICPR61_08w09
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:00. Reason: add code tag
 
Old 04-17-2009, 08:35   #18 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
nokia 3110c flashed successfully

Code:
MCU Version V 07.21
MCU Date 05-11-08
Product RM-237
Manufacturer (c) Nokia. 
IMEI 1, 05-11-08, RM-237, (c) Nokia. 
IMEI Spare 33353431393730323433303233333900
IMEI SV 33353431393730323433303233333900
ESN OTP 3E‘B2#
PPM V 07.21, 05-11-08, RM-237, (c) Nokia. , I
CNT Content: i, V 07.21, 05-11-08, RM-237, (c) Nokia. , 
PSN MKK750347
Product Code 0544343
Module Code 0203291
Basic Product Code 0542523
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 5003
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 1.953s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm237__07.21.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 55.906s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Skipping CMT PAPUBKEYS Certificate (already sent)...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 75.94s
Restarting MCU...
Processing rm237__07.21.mcusw (APE)...
Processing rm237__07.21.ppm_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.ppm_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Started group flash erase
EraseArea[0,CMT]: 0x01080000-0x0151FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 14.125s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.375s
Restarting MCU...
Processing rm237__07.21.ppm_mea4 (APE)...
Processing rm237__07.21.image_mea4 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 02A00102AB967A564D731A1491586E2A17852DA6
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID: 191EC665DFAAF68F
rm237__07.21.image_mea4, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 3.25Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0020881C00006A21, ST, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Started group flash erase
EraseArea[0,CMT]: 0x01520000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 46.609s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 16.313s
Restarting MCU...
Processing rm237__07.21.image_mea4 (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 07.21
MCU Date 05-11-08
Product RM-237
Manufacturer (c) Nokia. 
IMEI 354197024302339
IMEI Spare 3A45910742033203
IMEI SV 3345910742033223F5000000
PPM V 07.21, 05-11-08, RM-237, (c) Nokia. , MEA
PSN MKK750347
Product Code 0544343
Module Code 0203291
Basic Product Code 0542523
PSD 0000000000000000
RETU 32
TAHVO 53
AHNE 11
HW 5003
RFIC 17211721
DSP ICPR61_08w10
BT 06cc-P9.1
ADSP Sw 06cc-P9.1
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:01. Reason: add code tag
 
Old 04-17-2009, 08:35   #19 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
2600c unlocked ok

2600c unlocked

Code:
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia, 
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 15
Simlock FBUS Cnt 15
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 15
Simlock FBUS Cnt 15
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-340_V 05.61.unlock_img
Asking card to sign HW Signature...
Signed OK (218E118ECD30F9C3C375CA0BC3233C67F6035404)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 846A8C7833FC7460D88E527F1D
MSID-Plain: 2C40BAE9004094B7A8000000
FAID-Crypted: 4439C2950D8CF38C3635116E
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 0.828s
Writing 10 blocks...
All blocks written OK! Time taken 6.485s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia, 
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 0
Simlock FBUS Cnt 0

Last edited by ptt; 01-17-2010 at 00:01. Reason: add code tag
 
Old 04-17-2009, 08:36   #20 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
N70 flashed ok

N70 flashed ok

Code:
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_format.fg, Type: Algorithm, Rev: 0.1.16.255, Algo: OMAP1610 FORMAT ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Not Found
APE HWC Not Found
APE CCC Not Found
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Not Found
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 5 records
[308,0] Reading 1 bytes
[308,1] Reading 4096 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
PM Read OK, Time taken 1.0s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM84_50737301.C0 (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x0052B515, NOR
EraseArea[0,CMT]: 0x006A0000-0x006BFFFF, NOR
EraseArea[0,CMT]: 0x006DF000-0x006EFFFF, NOR
EraseArea[0,CMT]: 0x00700000-0x007EFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 46.515s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Skipping CMT PAPUBKEYS Certificate (already sent)...
Programming Status OK!
All blocks written OK! Time taken 32.46s
Restarting MCU...
Processing RM84_50737301.C0 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.C0, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1610 GBBM-1.8.1 ALG
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000000-0x0000FFFF, NAND
EraseArea[0,APE]: 0x00010000-0x0001FFFF, NAND
EraseArea[0,APE]: 0x00020000-0x000203FF, NAND
EraseArea[0,APE]: 0x00050000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 6.859s
Writing all blocks...
Writing APE KEYS Certificate...
Writing APE X-LOADER Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+LOADER Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Skipping APE PAPUBKEYS Certificate (already sent)...
Writing APE SOS*CORE Certificate...
Programming Status OK!
All blocks written OK! Time taken 47.94s
Restarting MCU...
Processing RM84_50737301.V03 (CMT)...
Processing RM84_50737301.V03 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.V03, Type: Flash Image, Algo: BB5, OMAP1610 GBBM-1.8.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x01AE0000-0x02AFFFFF, NAND
EraseArea[0,APE]: 0x02B00000-0x03ECFFFF, NAND
Waiting 320s for erasure finish...
Erase taken 3.953s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 31.953s
Restarting MCU...
Processing RM84_50737301.UDA (CMT)...
Processing RM84_50737301.UDA (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID: 17100701
APE_ASIC_MODE_ID: 00
APE_PUBLIC_ID: F8B6F13A1BBAE6A57F7628E9AF8EA3790C6BDA8B
APE_ROOT_KEY_HASH: 2C05369F57CC3C4CF9E783E83D9B512B00000000
APE_ROM_ID: AB5E4ADB27A06946
CMT_SYSTEM_ASIC_ID: 000000010000022600010006000C192101002200
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000352
CMT_PUBLIC_ID: 07100211809E4951A320C906B353893505FFE9DF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: E9EFF4BFAA5393217CA6B17755FC3E14
CMT_ROM_ID: F28A211FCEA7B19D
RM84_50737301.UDA, Type: Flash Image, Algo: BB5, OMAP1610 GBBM-1.8.1 ALG, BB5, BB5 ALGORITHM
RAP3Gv2_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.21.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 100Kbits
FlashChip[0,CMT]: 0x0001000200000111, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
FlashChip[0,APE]: 0x00EC003600A500C0, Samsung, NAND
Requested Algorithm: OMAP1610 GBBM-1.8.1 ALG (APE)
FlashContent[0,APE]: 00020000000600000000000000000000, NAND
h3_sam_nand_gbbm.fg, Type: Algorithm, Rev: 0.1.33.0, Algo: OMAP1610 GBBM-1.8.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 14.563s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 05wk07v48.1
MCU Date 28-08-07
Product RM-84
Manufacturer (c) Nokia. 
IMEI 359380004791433
IMEI Spare 3A95830040974103
IMEI SV 3395830040974113F2000000
PSN CIH650920
Product Code 0524086
Basic Product Code 0522156
PSD 0000001700000000
RETU 32
TAHVO 52
AHNE 22
HW 6001
DSP rolf_05wk07v29p1
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:02. Reason: add code tag
 
Old 04-17-2009, 08:37   #21 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
1600 imei ????????????? repaired in secs

DCT4 Imei Restored in seconds
Initializing FBUS...
All initialized - Ready to work
Programming data for IMEI: 352270010854258
Found FLASH Data Rebuild Block
Found UEM Data Rebuild Block
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00012A7E @ 0x01000000, AMD, SectorSize: 64kB, Ext: 00240111
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 0Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00012A7E (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
Programming FLASH data...
FLASH data Programmed OK
Programming UEM data...
UEM data Programmed OK
Terminating flash session
Write UEM finished
MCU Version V 5.03
MCU Date 21-04-06
Product RH-64
Manufacturer (c) NMP
IMEI 352270010854258
Asic 2
HW Signature 8FC9D0E5F56174B3
Simlock Server
Simlock Key 0010100000000000
Simlock Profile 0000000000000002
Simlock Aux 00020000
Simlock IMEI 00003522700108542500
Simlock Key Cnt 0
Simlock FBUS Cnt 0
 
Old 04-17-2009, 08:38   #22 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
2600C successfully flashed

2600C successfully flashed

Code:
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 847D68BB4038D1F794F0E04B5C
MSID-Plain: 2C40BAE9005ACD9BA8000000
FAID-Crypted: 68906042BBA30A1C4F9E115F
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 33.766s
Writing 344 blocks...
All blocks written OK! Time taken 388.313s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 843232CDF216EC1CD567F7497E
MSID-Plain: D26EBAF1005ACD9BAA000610
FAID-Crypted: F65F397CEA568D0BDB6BF6B2
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 45.953s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 200 blocks...
All blocks written OK! Time taken 88.563s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.61.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84D4777A19CE31F37245CD59BD
MSID-Plain: 3E4EBAE9005ACD9BA8000000
FAID-Crypted: 112B19390666D0BD614991B5
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 10.640s
Writing 91 blocks...
All blocks written OK! Time taken 90.360s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 354170027490088
IMEI Spare 3A45710072940008
IMEI SV 3345710072940038F0000000
PPM V 05.61, 18-04-08, RM-340, (c) Nokia, IA
CNT Content: ia, V 05.61, 18-04-08, RM-340, (c) Nokia, 
PSN DLQ913079
Product Code 0556643
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1002
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature 3FD992BC11ECA738
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553541700274900800
Simlock Key Cnt 0
Simlock FBUS Cnt 0

Last edited by ptt; 01-17-2010 at 00:03. Reason: add code tag
 
Old 04-17-2009, 08:38   #23 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
2630 flashed ok

2630 flashed

Code:
MCU Version V 05.61
MCU Date 18-04-08
Product RM-340
Manufacturer (c) Nokia
IMEI 353122026693924
IMEI Spare 3A35210262969302
IMEI SV 3335210262969332F0000000
PPM V 05.21, 18-12-07, RM-340, (c) Nokia, IA
CNT Content: ag, V 05.61, 18-04-08, RM-340, (c) Nokia, 
PSN DRK604016
Product Code 0556652
Module Code 0203632
Basic Product Code 0551000
PSD 0000000D00000000
LPSN 0
HW 1001
UEM 1328
UPP 12642
RFIC 0500
DSP P06w45.v48
LCD SUEZ
BT 2222-v101
Asic 11
HW Signature FD888DC66CEE74AF
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553531220266939200
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84782D4EC6651A6864122128B3
MSID-Plain: 2C40BAE9004094B7A9000000
FAID-Crypted: 90524608620BA634187FE753
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 38.562s
Writing 344 blocks...
All blocks written OK! Time taken 275.312s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 84B3C7F82504D41D0874F7E62D
MSID-Plain: D26EBAF1004094B7AA000610
FAID-Crypted: 5C92E330228E7159B8D1909E
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 50.531s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 208 blocks...
All blocks written OK! Time taken 70.62s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm340__05.21.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2208 @ 0x01000000, Samsung, SectorSize: 128kB, Ext: 00009121
FlashChip[1]: 0x00EC2208 @ 0x02000000, Samsung, SectorSize: 128kB, Ext: 00009121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2208 (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 841782822587FD06F8A32FC629
MSID-Plain: 3E4EBAE9004094B7AA000000
FAID-Crypted: 1937C6C93C65BFD414F88C21
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 11.922s
Writing 91 blocks...
All blocks written OK! Time taken 67.938s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:03. Reason: add code tag
 
Old 04-17-2009, 08:39   #24 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
2630 flashed + unlocked ok

2630 flashed + unlocked

Code:
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B00FF10400000000000000000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84D1B3D91BA0654CC335E0EAB4
MSID-Plain: 2C40BAE900D06D4EA9000000
FAID-Crypted: 2ED1E994B9FC11B212AF2402
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 107.641s
Writing 343 blocks...
All blocks written OK! Time taken 65.266s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 8417BF11891EB032D510C0175E
MSID-Plain: D26EBAF100D06D4EAA000610
FAID-Crypted: 993C7A7D650FCF14A0E68DCA
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 135.328s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 200 blocks...
All blocks written OK! Time taken 19.469s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm298__05.62.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 841019C73CAA4E546954CC6F07
MSID-Plain: 3E4EBAE900D06D4EA9000000
FAID-Crypted: CE0488F9007EFAFCAA9B934D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 34.563s
Writing 90 blocks...
All blocks written OK! Time taken 17.78s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 05.62
MCU Date 02-07-08
Product RM-298
Manufacturer (c) Nokia
IMEI 359342029758938
Asic 11
HW Signature 2273ED7CEC3D8182
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553593420297589300
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RM-298_V 05.62.unlock_img
Asking card to sign HW Signature...
Signed OK (0C553010E40B20195D09345C8D061EE8854A2E6E)
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84D1B3D91BA0654CC335E0EAB4
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 2ED1E994B9FC11B212AF2402
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01080000-0x0109FFFF]
Erase taken 2.203s
Writing 10 blocks...
All blocks written OK! Time taken 1.563s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:04. Reason: add code tag
 
Old 04-17-2009, 08:41   #25 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
6610i flashed successfully

6610i flashed successfully

Code:
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.07V 
Terminating flash session
Boot operation took 6.110s
Check Flashing Bus finished
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.200, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 84521831D4EFF98575921C8D1A
MSID-Plain: 82A9BAE900D23D52A9000000
FAID-Crypted: CF91BA9C6A21458CFAFB6AC4
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x017FFFFF]
Erasing NOR Region [0x01A00000-0x01FDFFFF]
Erase taken 131.281s
Writing 385 blocks...
All blocks written OK! Time taken 43.672s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.20.ucp_g, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 846B803F20D394D4BE786BA09C
MSID-Plain: 82A9BAE900D23D52AA000000
FAID-Crypted: 643551A29DA16BE454D7DF61
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01800000-0x019FFFFF]
Erase taken 19.328s
Writing 27 blocks...
All blocks written OK! Time taken 2.875s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 1120 [HW_UPP8M_v2]
rm-3704.20g, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 1
FlashChip[0]: 0x00EC22F8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007011
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22F8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 846B803F20D394D4BE786BA09C
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 643551A29DA16BE454D7DF61
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01800000-0x019FFFFF]
Erase taken 19.78s
Writing 69 blocks...
All blocks written OK! Time taken 7.468s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:04. Reason: add code tag
 
Old 04-17-2009, 08:42   #26 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
1110i erased and flashed ok

1110i erased and flashed ok

Code:
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
Flashbus Write baud set to 1.0Mbits
Erasing NOR Region [0x01000000-0x013FFFFF]
Erase All Chips finished
 
 
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.020, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8459D1181AD335455B7289BA44
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: AF9D08DC6E6D7F5587F1F51F
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 24.750s
Writing 122 blocks...
All blocks written OK! Time taken 10.937s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh930_nai7.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84AB6021797F8F0699ABE9C031
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E6ECD46CB031772894795C67
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.609s
Writing 10 blocks...
All blocks written OK! Time taken 0.859s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84AB6021797F8F0699ABE9C031
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: E6ECD46CB031772894795C67
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 10.359s
Writing 82 blocks...
All blocks written OK! Time taken 6.969s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:43. Reason: add code tag
 
Old 04-17-2009, 08:42   #27 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
2610 flashed and unlocked ok

2610 flashed and unlocked
Code:
MCU Version V 04.90
MCU Date 10-01-07
Product RH-86
Manufacturer (c) Nokia. 
IMEI 355528010258078
IMEI Spare 3A55250801520807
IMEI SV 3355250801520837F2000000
PPM V 04.90, 10-01-07, RH-86_87, (c) Nokia. , IA
CNT Content: ia, V 04.90, 10-01-07, RH-86_87, (c) Nokia. 
PSN KAI508992
Product Code 0533259
Module Code 0202930
Basic Product Code 0530409
PSD 0000000D00000000
HW 9001
UEM 1328
UPP 12352
RFIC 0500
DSP P05w45.v45
LCD ELBE
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
MSID-Plain: 37DFBAE900524BDDA8000000
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
3 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x018DFFFF]
Erasing NOR Region [0x01EE0000-0x01FDFFFF]
Erase taken 74.31s
Writing 554 blocks...
All blocks written OK! Time taken 49.344s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.image_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 846D281C1B6776CD75422758E0
MSID-Plain: D26EBAF100524BDDAA000610
FAID-Crypted: F29385FE39D6B837D06AF9AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01B80000-0x01EDFFFF]
Erase taken 21.719s
File Sector Size: 64kB, Flash Chip Sector Size: 64kB
CNT Convertion not needed
Writing 80 blocks...
All blocks written OK! Time taken 7.422s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
rh86_87__07.11.ppm_ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 84E9B23CDE7E311164FC532F72
MSID-Plain: 3E4EBAE900524BDDA9000000
FAID-Crypted: 3601E21465AA21557A188625
Flashbus Write baud set to 3.25Mbits
1 Region(s) to erase
Erasing NOR Region [0x018E0000-0x01B7FFFF]
Erase taken 19.922s
Writing 99 blocks...
All blocks written OK! Time taken 9.125s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 07.11
MCU Date 05-11-08
Product RH-86
Manufacturer (c) Nokia. 
IMEI 355528010258078
Asic 11
HW Signature 4ECF82953E763D63
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 0010100000000000
Simlock Profile 800000000001000B
Simlock Aux 000B5555
Simlock IMEI 00553555280102580700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-86_V 07.11.unlock_img
Asking card to sign HW Signature...
Signed OK (D2884B725A07188A8421A1F7029644DC47E1D238)
Writing patch file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.906s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 3040 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC22E8 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00007121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC22E8 (128Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8447B528BB2E252A6CF1D4A9F5
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 7681A7F7BD3EC3ADFC30C99D
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x010A0000-0x010BFFFF]
Erase taken 0.953s
Writing 8 blocks...
All blocks written OK! Time taken 0.735s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:44. Reason: add code tag
 
Old 04-17-2009, 16:56   #28 (permalink)
Freak Poster
 
lasfar's Avatar
 
Join Date: Jul 2004
Location: casablanca
Age: 58
Posts: 307
Member: 75223
Status: Offline
Thanks Meter: 62
n95 8G :

Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 
Handling device: [Cyclone Team], [
Card is activated
Box is activated
Started box selftests procedure
USB Voltage    5,04v    PASSED
MCU Voltage    3,27v    PASSED
Core Voltage    1,79v    PASSED
VBAT Voltage    0,01v    PASSED
VBAT Voltage    4,92v    PASSED
Box VPP disabled
VPP Voltage    0,04v    PASSED
Internal Box VPP Enabled
VPP Voltage    4,83v    PASSED
Box VPP disabled
VPP Voltage    0,04v    PASSED
External Box VPP Enabled
VPP Voltage    0,00v    FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        41v64.1, 26-09-08, RM-320, (c) Nokia
IMEI Spare    33353638343230323338303737343100
IMEI SV        3A65480232087704
ESN OTP    3eH2w
Failed to read info -> Failed to read extended info
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        356842023807741
IMEI Spare    3A65480232087704
IMEI SV        3365480232087714F2000000
PSN        SHG437010
Product Code    0557631
Basic Product Code    0548236
PSD        0000000000000000
LPSN        0
WLAN MAC    0022FD4CBA13
RETU        16
TAHVO        22
AHNE        11
HW        4120
RFIC        17141715
DSP        aino_mc.ICPR62_08w28
Simlock Server    SIMLOCK SERVER
Simlock Key    2081000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
CMT NPC Ok
CMT HWC Ok
CMT CCC Ok
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
APE NPC Ok
APE HWC Ok
APE CCC Ok
APE R&D Ok
APE VARIANT Not Found
APE PAPUBKEYS Ok
APE KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 10 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,2] Reading 1 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.828s
Starting PM read in range 120-120...
[120] Reading 4 records
[120,0] Reading 50593796 bytes
Failed to read PM -> Failed to read PM Record 120,0
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing RM-320_31.0.015_PR.C0R (CMT)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00080000-0x007CF385, NOR
EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
EraseArea[0,CMT]: 0x00880000-0x00FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 41.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 34.656s
Restarting MCU...
Processing RM-320_31.0.015_PR.C0R (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
RM-320_31.0.015_PR.C0R, Type: Flash Image, Algo: BB5, XSR 1.5, BB5, OMAP2420 UNISTORE-II-1.5.1 ALG
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x00000200-0x0000AFFF, NAND
EraseArea[0,APE]: 0x0000B800-0x000AFFFF, NAND
EraseArea[0,APE]: 0x00000000-0x00000FFF, NAND
EraseArea[0,APE]: 0x0000D800-0x0000E9FF, NAND
EraseArea[0,APE]: 0x00080000-0x000BFFFF, NAND
EraseArea[0,APE]: 0x000E0000-0x0045FFFF, NAND
EraseArea[0,APE]: 0x004C0000-0x0073FFFF, NAND
EraseArea[0,APE]: 0x00A40000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.328s
Writing all blocks...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE X-LOADER Certificate...
Writing APE KEYS Certificate...
Writing APE PRIMAPP Certificate...
Writing APE SOS+XZIP Certificate...
Writing APE PASUBTOC Certificate...
Writing APE PAPUBKEYS Certificate...
Writing APE SOS+UPDAPP Certificate...
Writing APE SOS+CORE Certificate...
Writing APE SOS+ROFS Certificate...
Programming Status OK!
All blocks written OK! Time taken 97.781s
Restarting MCU...
Processing RM-320_31.0.015_PR.v08 (CMT)...
Processing RM-320_31.0.015_PR.v08 (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
RM-320_31.0.015_PR.v08, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,APE]: 0x05140000-0x06F3FFFF, NAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing APE SOS+ROFX Certificate...
Programming Status OK!
All blocks written OK! Time taken 17.219s
Restarting MCU...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (CMT)...
Processing RM320_31.0.002_025_zzz_U03_uda.fpsx (APE)...
Booting RAP...
APE_SYSTEM_ASIC_ID:     24200705
APE_ASIC_MODE_ID:     00
APE_PUBLIC_ID:         363A07F9059D0ECB74D6B45EC48718F024FC1B85
APE_ROOT_KEY_HASH:     BA8710A7E1CD5A2909B9A875DB27AA2400000000
CMT_SYSTEM_ASIC_ID:     000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:         00000296
CMT_EM_ASIC_ID:         00000B22
CMT_PUBLIC_ID:         1570010C75B90158822370271EBD417BE9789FA5
CMT_ASIC_MODE_ID:     00
CMT_ROOT_KEY_HASH:     CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:         4B9B75103E691FF8
RM320_31.0.002_025_zzz_U03_uda.fpsx, Type: Flash Image, Algo: BB5, OMAP2420 UNISTORE-II-1.5.1 ALG, BB5, XSR 1.5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003500006921, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
omap2420_m1_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.41.0, Algo: BB5
FlashChip[0,APE]: 0x00EC004000220000, Samsung, NAND
Requested Algorithm: OMAP2420 UNISTORE-II-1.5.1 ALG (APE)
FlashChip[0,APE]: 0xFFFF000000000000, Unknown, MMC
teflon_sam_nand_xsr151_m1.fg, Type: Algorithm, Rev: 0.1.57.0, Algo: OMAP2420 UNISTORE-II-1.5.1 ALG
Box VPP disabled
Internal APE Phone VPP Enabled
PAPUBKEYS Hash for APE: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
Started group flash erase
EraseArea[0,APE]: 0x06F40000-0x0F87FFFF, NAND
Erase Certificate: SOS-USER (APE)
Waiting 320s for erasure finish...
Erase taken 0.625s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 42.969s
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version    V 06wk41v64.1
MCU Date    26-09-08
Product        RM-320
Manufacturer    (c) Nokia
IMEI        356842023807741
IMEI Spare    3A65480232087704
IMEI SV        3365480232087714F2000000
PSN        SHG437010
Product Code    0557631
Basic Product Code    0548236
PSD        0000000000000000
LPSN        0
WLAN MAC    0022FD4CBA13
RETU        16
TAHVO        22
AHNE        11
HW        4120
RFIC        17141715
DSP        aino_mc.ICPR62_08w28
Simlock Server    SIMLOCK SERVER
Simlock Key    2081000000000000
Simlock Profile    0000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
THANK YOU

Last edited by ptt; 01-17-2010 at 00:45. Reason: add code tag
 
Old 04-18-2009, 10:48   #29 (permalink)
No Life Poster
 
hasnain's Avatar
 
Join Date: Apr 2006
Location: Pakistan
Posts: 4,239
Member: 265626
Status: Offline
Sonork: 100.1591486
Thanks Meter: 2,982
1112 flashed and unlocked perfect after latest main firmware of cyclone

Code:
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.020, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V 
MSID-Crypted: 8400BF71306E7922771ABDBE53
MSID-Plain: 3E4EBAE90091061DAA000000
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
5 Region(s) to erase
Erasing NOR Region [0x01000000-0x0100FFFF]
Erasing NOR Region [0x01010000-0x013BFFFF]
Erasing NOR Region [0x013C0000-0x013EFFFF]
Erasing NOR Region [0x017C0000-0x017EFFFF]
Erasing NOR Region [0x01FC0000-0x01FEFFFF]
Erase taken 23.219s
Writing 122 blocks...
All blocks written OK! Time taken 10.781s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh930_nai7.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8403DE503F13CA8E401B26D71A
MSID-Plain: 3E4EBAE90091061DA8000000
FAID-Crypted: 1E408C8D7EF5A33B94C75827
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01380000-0x013BFFFF]
Erase taken 1.469s
Writing 10 blocks...
All blocks written OK! Time taken 0.859s
Terminating flash session
Extracting Content Package...
CP Server: File Server fake reply for CUI phone.
CP Extract Failed -> CP Not Extracted, Code: 1
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
rh93_07.02ia, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8403DE503F13CA8E401B26D71A
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 1E408C8D7EF5A33B94C75827
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x011E0000-0x011EFFFF]
Erasing NOR Region [0x011F0000-0x0137FFFF]
Erase taken 9.719s
Writing 82 blocks...
All blocks written OK! Time taken 7.313s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Setting Factory Defaults...
Factory defaults OK
Unlocking...
MCU Version V 7.02
MCU Date 10-12-07
Product  RH-93
Manufacturer (c) NMP
IMEI  353973014807433
Asic  2
HW Signature 1C1374E945B5FB75
Simlock Server 
Simlock Key 0010100000000000
Simlock Profile 0000000000010002
Simlock Aux 00023031
Simlock IMEI 00003539730148074300
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Selecting unlock method...
Search in: C:\Program Files\Cyclone Box\UnlockData\
Searching for: RH-93_V 7.02.unlock_img
Asking card to sign HW Signature...
Signed OK (1AC2B5A1D4EA1CBF768075FECDA1210B79B4AA28)
Writing patch file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V 
MSID-Crypted: 8400BF71306E7922771ABDBE53
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01140000-0x0115FFFF]
Erase taken 0.766s
Writing 8 blocks...
All blocks written OK! Time taken 0.703s
Terminating flash session
Box VPP disabled
Writing SP...
New SP Accepted OK!
Writing restore file...
Booting UPP...
UPP ID: 2201 [HW_UPP2M_v2]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.77.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00EC2268 @ 0x01000000, Samsung, SectorSize: 64kB, Ext: 00000121
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x00EC2268 (32Mbits), Rev: 7.4.77.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V 
MSID-Crypted: 8400BF71306E7922771ABDBE53
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: 5A7B26679CD58EA15FFC55AF
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01140000-0x0115FFFF]
Erase taken 0.750s
Writing 8 blocks...
All blocks written OK! Time taken 0.688s
Terminating flash session
Box VPP disabled
Phone unlocked OK!
Unlock thread finished, continuing...
Post-flash tasks finished...
Flash successfully finished!

Last edited by ptt; 01-17-2010 at 00:45. Reason: add code tag
 
Old 04-18-2009, 12:14   #30 (permalink)
No Life Poster
 
amralkareem's Avatar
 
Join Date: Jun 2005
Location: Egypt
Age: 42
Posts: 1,660
Member: 153397
Status: Offline
Sonork: 113032
Thanks Meter: 372
6233 work good

Code:
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.6664
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.01, (Apr 18 2009 02:44:06, gcc-4.2.2, RTOS V5.1.0), Type: Signed Production Application
Box Serial Number: C000011A
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D10002E1
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage	4.84v	PASSED
MCU Voltage	3.28v	PASSED
Core Voltage	1.83v	PASSED
VBAT Voltage	1.54v	PASSED
VBAT Voltage	4.66v	PASSED
Box VPP disabled
VPP Voltage	0.00v	PASSED
Internal Box VPP Enabled
VPP Voltage	4.66v	PASSED
Box VPP disabled
VPP Voltage	0.04v	PASSED
External Box VPP Enabled
VPP Voltage	0.02v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Initializing FBUS...
All initialized - Ready to work
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
Failed to Check BB5 Flashing Bus  -> RAP Not Responding
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
Check BB5 Flashing Bus Finished OK
Processing pre flash tasks...
Backing up certificates...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
APE Subsystem Not Found
CMT NPC Ok
CMT HWC Not Found
CMT CCC Not Found
CMT R&D Ok
CMT VARIANT Ok
CMT PAPUBKEYS Ok
CMT KEYS Ok
Restarting MCU...
Read all certificates finished
Certificates backup thread finished, continuing...
Backing up simlock...
Starting PM read in range 308-308...
[308] Reading 9 records
[308,0] Reading 1 bytes
[308,1] Reading 8192 bytes
[308,3] Reading 1 bytes
[308,4] Reading 1 bytes
[308,5] Reading 10 bytes
[308,6] Reading 1 bytes
[308,7] Reading 1 bytes
[308,8] Reading 1 bytes
[308,9] Reading 40 bytes
PM Read OK, Time taken 2.969s
Simlock backup OK
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm123_145_30005.600.mcusw (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
rm123_145_30005.600.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
EraseArea[0,CMT]: 0x000006C0-0x0000FFFF, NOR
EraseArea[0,CMT]: 0x00010000-0x0007FFFF, NOR
EraseArea[0,CMT]: 0x000A0000-0x0021FFFF, NOR
EraseArea[0,CMT]: 0x00220000-0x011DDFFF, NOR
EraseArea[0,CMT]: 0x011DE000-0x011DEFFF, NOR
EraseArea[0,CMT]: 0x011DF000-0x011DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 50.297s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
Writing CMT PMM_CONF Certificate...
Writing CMT SBIF_CONF Certificate...
Programming Status OK!
All blocks written OK! Time taken 568.453s
Restarting MCU...
Processing rm123_145_30005.600.mcusw (APE)...
Processing rm123_145_3005.60.ppm_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
rm123_145_3005.60.ppm_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x011E0000-0x016DFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 11.860s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 138.344s
Restarting MCU...
Processing rm123_145_3005.60.ppm_g (APE)...
Processing rm123_145_30005.60.image_g (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID:	 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID:		 00000232
CMT_EM_ASIC_ID:		 00000353
CMT_PUBLIC_ID:		 14900214506D5150004C79747A14B353F45C8F96
CMT_ASIC_MODE_ID:	 00
CMT_ROOT_KEY_HASH:	 BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_ROM_ID:		 273F6D55DFAAF68F
rm123_145_30005.60.image_g, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 51Kbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC220800000121, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Flashbus Write baud set to 4.0Mbits
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 2F36DDC4990FD844712A61A80C033211BD9602E3
Started group flash erase
EraseArea[0,CMT]: 0x016E0000-0x01E7FFFF, NOR
EraseArea[0,CMT]: 0x01E80000-0x01FDFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 26.703s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 69.141s
Restarting MCU...
Processing rm123_145_30005.60.image_g (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version	V 05.60
MCU Date	14-09-07
Product		RM-145
Manufacturer	(c) Nokia
IMEI		354827021258155
IMEI Spare	3A45280712521805
IMEI SV		3345280712521805F8000000
PPM		V 05.60, 14-09-07, RM123_145_-, (c) Nokia, G
PSN		CBI272408
Product Code	0535955
Basic Product Code	0528588
PSD		0000001F00000000
RETU		32
TAHVO		53
AHNE		30
HW		2013
RFIC		17211721
DSP		pb05wk46v50
LCD		SEIKO
Simlock Server	SIMLOCK SERVER VERSION 63
Simlock Key	2440700000000000
Simlock Profile	0000000000000000
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

Last edited by ptt; 01-17-2010 at 00:46. Reason: add code tag
 
The Following User Says Thank You to amralkareem For This Useful Post:
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
POST HERE all Successfull Report with Micro-Box, HTC cable, etc.. hitibiti Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...) 2837 07-05-2020 10:10
Put in this thread all successfull story of Dct4 Imei???? with Mxkey mobilecitycbk MXKEY Nokia Flasher and Unlocker (by Alim Hape) 1 06-17-2009 21:28
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box FullFLASHgSMPH Cyclonebox 2 04-13-2009 14:00

 



All times are GMT +1. The time now is 21:41.



Powered by Searchlight © 2025 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.56398 seconds with 10 queries

SEO by vBSEO