GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   McnPro Box (https://forum.gsmhosting.com/vbb/f532/)
-   -   cross v10 coolsand write err (https://forum.gsmhosting.com/vbb/f532/cross-v10-coolsand-write-err-1617135/)

cuwi lan seank 02-19-2013 18:31

cross v10 coolsand write err
 
MCN v3.43 that made ​​write boot err.ok but if it is read

Welcome to use McnBox!
Selected COM5
Current occupied port COM1 COM1
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxx
Firmware V1.15
Checksum 03A8-30BE
Software V3.43
Box Connected!
Ready working at COM5
-------------------------------
Start Scanning...
->...#....
Results:
GND:1 ,RXD:4,TXD:5
[G:1 R:4 T:5] Apply to Box
[G:1 R:4 T:5] Apply to Box
Connecting...
Press Power button now !
Phone Connected!
CPU Info Coolsand (880A7002)
Flash Type NOR
Flash ID 002C00CB(00160000)
Flash Model MX25l032
Flash Size 0x400000(4,0M)
Initialize boot...
Boot Error. ID: 1011


after they were mutually exchange bootloader is still the same :confused:

omega2305 03-24-2013 15:36

i have same problem,

Welcome to use McnBox!
Selected COM3
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN-------------
Firmware V1.15
Checksum 11AD-35BE
Software V3.44
Box Connected!
Ready working at COM3
-------------------------------
Start Scanning...
->.....
Results:
GND:10,RXD:3,TXD:1
[G:10 R:3 T:1] Apply to Box
[G:10 R:3 T:1] Apply to Box
Connecting...
Press Power button now !
Phone Connected!
CPU Info Coolsand (880A7002)
Flash Type NOR
Flash ID 00C80040(00160000)
Flash Model GD25Q32
Flash Size 0x400000(4,0M)
Initialize boot...
Boot Error. ID: 1011

PhoneCareCenter 03-26-2013 14:21

@all

Coolsand Model GD25Q32 is currently Supported with McnLite only. We will do our best to add it to McnPro in the next few updates.


Mcnpro & McnLite

FLUDERATOR 04-17-2013 11:11

Quote:

Originally Posted by PhoneCareCenter (Post 9300561)
@all

Coolsand Model GD25Q32 is currently Supported with McnLite only.

Does not support McnLightBox, I did not get to flash the error when flashing!

Code:

  13:28:35 Pinout Applied
  13:28:35 Phone detected, Wait...
  13:28:37 Done.
  13:28:38 CPU Type Coolsand (88094005)
  13:28:38 Flash Type NOR
  13:28:38 Flash ID 00C80040(00160000)
  13:28:38 Flash Model GD25Q32
  13:28:38 Flash Size 0x400000(4,0M)
  13:28:38 Initialize boot,Wait...
  13:28:38 BootLoad Error. ID:2611

Updates do not help, boot and speed does not help me too!

wonk 06-14-2013 21:12

this log use mcn lite :

04:43:02 PID&VID: AB211502
04:43:02 pinouts: D+:6 D-:8 Gnd:2
04:43:02 Pinout Applied
04:43:08 Phone detected, Wait...
04:44:20 Timeout. Please Check Pinouts or Try agian. Code:0458

what the problem,,,please help.....cannot read/write..only find rx tx....

ok86 11-04-2013 07:58

ayo mcn pro i love u !!! moga support secepat nya ''berharap'' best best


All times are GMT +1. The time now is 15:46.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.12521 seconds with 6 queries

SEO by vBSEO