GSM-Forum
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   McnPro Box (https://forum.gsmhosting.com/vbb/f532/)
-   -   ★★★★★Discussion here>> Mcnpro Box version 3.2.9 ★★★★★ (https://forum.gsmhosting.com/vbb/f532/discussion-here-mcnpro-box-version-3-2-9-a-1479484/)

Mcnbox 05-23-2012 12:02
★★★★★Discussion here>> Mcnpro Box version 3.2.9 ★★★★★
 
What's new for Mcnpro box version 3.2.9 ?


  • Improved MTK 6573/6516/6513 read /write
  • Fix Nor flash write bugs for boot6
  • Improved MTK USB Pin-find function
  • Improved Spreadtrum 6800H read /write
  • Add support Spreadtrum 880xG
  • Spreadtrum new Flash ICs added
  • Fix Mstar read /write bugs
  • Other small report bugs fixed



Upgrading from Previous Versions:


  • Version of 3.2.9 request install Suite version 2.1.1 at first, As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !



Best regards!

Mcnbox

ashakaass 05-23-2012 12:39
coolsand support ??????????????????????

Mcnbox 05-23-2012 14:44
Quote:
Originally Posted by ashakaass (Post 8437996)
coolsand support ??????????????????????

CoolSand will be add in next version into Mcnpro Box !

Quote:
Originally Posted by aNt-GSM (Post 8438311)
Can't download in support area...
PM me your Box S/N and Activation code !


Best regards !

Mcnbox

boussoula 05-23-2012 17:30
plzzzzzzzzz mcnboxteam
 
pin detect but the phone not connect

look here


http://img232.imageshack.us/img232/9465/okkkg.png


what can i do thank?????

and give me

""error usbport""

Mcnbox 05-23-2012 17:38
Quote:
Originally Posted by boussoula (Post 8438980)
pin detect but the phone not connect

look here


http://img232.imageshack.us/img232/9465/okkkg.png


what can i do thank?????

and give me

""error usbport""
Using multimeter check the USB port voltage, thanks

habib.habib88 05-24-2012 03:21
still problem with pinfinder rxtx mt6252. direct soldering to board because mini-usb is broken. thanks

milandhal 05-24-2012 04:13
Which cool sand cup supported ?

Any reselar in india have stock mcn light box plz inform me in yahoo or sonork or in mobile no.

Thanks

[aNt] 05-24-2012 05:12
Error Read SPD 6600L/WT6226
Quote:
[G:1 7 D-:10 D+:9] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM12
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6600L/WT6226
Flash Type NOR
Flash ID 002088C4(002088C4)
Flash Model ST M58LR128HT
Flash Size 0x1000000(16.0M)
Start Reading...
Read Error. ID: 1079_3
File saved: D:\FIRMWARE AREA\FIRMWARE CHINA\BEYOND\BEYOND B610\6600L_WT6226_ST M58LR128HT.bin
But Format is OK
Quote:
USB D-: 10 USB D+: 9 GND:1
Press [ Save ] to save Pinout
[G:1 7 D-:10 D+:9] Apply to Box
If Scan other phone, please click [Stop]
[G:1 7 D-:10 D+:9] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM12
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6600L/WT6226
Flash Type NOR
Flash ID 002088C4(002088C4)
Flash Model ST M58LR128HT
Flash Size 0x1000000(16.0M)
Check firmware,Wait...
Done..
Thanks

OnyGSM 05-24-2012 05:23
Write Flash SC6800H always show error at 99%
6800H_TOSHIBA_TY8A0A111180KA40

[V:2 7 G:8 9 D-:3 D+:4 Down:5] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM71
Connecting, wait...
Phone Connected!
Info: SPRD3
Initialize boot12...
Boot Done.
Flash Type NAND
Start Writing...Format Zone
Write flash Error. ID: 1121

Write flash Error. ID: 1121

http://i253.photobucket.com/albums/h...1211-17-24.jpg

ub 05-24-2012 05:31
I want box imnpakistan ??????????????

sandulxxx 05-24-2012 05:41
try format mstar chipset
read ok but auto format error

Code:
Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxxxxx
Firmware V1.15
Checksum 3385-1DBE
Software V3.29
Box Connected!
Ready working at COM21
Finder Testing ...
PWL Testing ...
Chip Testing ...
Clamps Testing ...
Test Finished!
Scanning pin status,please waiting...
->
Pin-status Scan Done
Scanning,waiting...
->
Operation done, Pin detect out.
BOOT : 4  USB D-: 2  USB D+: 3  Mstar MSW853X
Total expend 63 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Phone Connected!
Initialize boot4...
Boot Error. ID: 1015
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Start Reading...
Read Done!
File saved: C:\Documents and Settings\blues\My Documents\Mstar_SPANSION_S71GL064NB0.bin
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Erase Flash Error. ID: 1075
:confused: :confused:

089999945 05-24-2012 08:26
hi team and other user pls ohter link
in support very slow and can't login

thanks.

wiro_cool 05-24-2012 08:40
Quote:
Originally Posted by sandulxxx (Post 8440073)
try format mstar chipset
read ok but auto format error

Code:
Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2010xxxxxxxxx
Firmware V1.15
Checksum 3385-1DBE
Software V3.29
Box Connected!
Ready working at COM21
Finder Testing ...
PWL Testing ...
Chip Testing ...
Clamps Testing ...
Test Finished!
Scanning pin status,please waiting...
->
Pin-status Scan Done
Scanning,waiting...
->
Operation done, Pin detect out.
BOOT : 4  USB D-: 2  USB D+: 3  Mstar MSW853X
Total expend 63 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Phone Connected!
Initialize boot4...
Boot Error. ID: 1015
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Start Reading...
Read Done!
File saved: C:\Documents and Settings\blues\My Documents\Mstar_SPANSION_S71GL064NB0.bin
Connecting, wait...
Phone Connected!
Initialize boot6...
Boot Done.
Flash Type NOR
Flash ID 00011001
Flash Model SPANSION_S71GL064NB0
Flash Size 0x800000(8.0M)
Erase Flash Error. ID: 1075
:confused: :confused:
Code:
What's new for Mcnpro box version 3.2.9 ?


    * Improved MTK 6573/6516/6513 read /write
    * Fix Nor flash write bugs for boot6
    * Improved MTK USB Pin-find function
    * Improved Spreadtrum 6800H read /write
    * Add support Spreadtrum 880xG
    * Spreadtrum new Flash ICs added
    * Fix Mstar read /write bugs
    * Other small report bugs fixed

At this Moment,i Think MCN not Support Auto Format for Mstar Chipset.Just Support Read and Write.so,try Write with Normal Firmware and Choose Boot 3 ;)

sumatera 05-24-2012 09:28
I think for boot mstar chipset not same(not just boot 3).

look this:

http://forum.gsmhosting.com/vbb/8430273-post3.html

with new version same.

Agunk Radical 05-24-2012 09:32
Flashing SPD 6800H

Quote:
Firmware V1.15
Checksum ED52-CABE
Software V3.29
Box Connected!
Ready working at COM7
[G:8 9 D-:3 D+:4 Up:12 Down:5] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM8
Connecting, wait...
Phone Connected!
Info: SPRD3
Initialize boot12...
Boot Done.
Flash Type NAND
Start Writing...Format Zone
Write Done!
If the phone can not boot, lower the baud then write once
FLASH DONE but can't power on


All times are GMT +1. The time now is 19:49.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13936 seconds with 6 queries

SEO by vBSEO