★★★★★Discussion here>> Mcnpro Box version 3.3.5 ★★★★★
 

For New version Discussion / Feedback etc!!

More check at Here.




Best regards !

Mcnbox Team

link to download
 

nice update mcn team








MCN the best chinese tool

good job my bro ;):D

cn PRO Box update thanks

Keep post , we are stay with you guys ! ^_^

Thanks For Update MCN Team

Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º9
USB D-: 4 USB D+: 6 VID:0E8D&PID:0003
Press [ Save ] to save Pinout
Total expend 5 seconds
[G:10 D-:4 D+:6 Up:9] Apply to Box
If Scan other phone, please click [Stop]
Waiting for USB Port...
MTK Serial Port: COM56
Press and Holding Power button now !
Connecting, wait...
CPU£ºMT6252 Ver: CA05 SW:0101
Release Power Button now
Phone detected
UnLock Code 13131313
Done

and Thanks For add USB Cable stand function

Finally......

USB Cable stand function

thanks


br

mstar msw 8533d series done read and write....

thanks bro for test report keep it up











br

this is stand usb cable ??? still need for searching pinout,isnt it??

from the earlier setup 3.33 i found a problem like this

Software V3.35
Box Connected!
Ready working at COM5
[V:2 G:8 9 D-:3 D+:4 Down:5] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM15
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 0020882E(0020882E)
Flash Model ST M36L0R7050U3ZS
Flash Size 0x1000000(16,0M)
Start Reading...
Read Error. ID: 1079_3
File saved: C:\Program Files\Z3X\MTK\Backups\6600L_WT6228_ST M36L0R7050U3ZS.bin

file couldnt save ,until i install the latest ,got same thing

NOt Brother
Btw, usb cable stand tested on other phone


Thanks mcnteam

ic ic , i need a sample to believe how its work

i got another problem here

Firmware V1.15
Checksum 65DB-43BE
Software V3.35
Box Connected!
Ready working at COM5
[V:2 G:1 8 10 D-:4 D+:6] Apply to Box
Checking USB Serial port, wait...
SCI USB2Serial Port: COM15
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6610
Flash Type NOR
Flash ID 00C80040(00170000)
Flash Model GD25Q64
Flash Size 0x800000(8,0M)
Start Reading...
Read Error. ID: 1079_3
File saved: C:\

always cant save

Did you checked on other pc?

i didnt install on another pc , but i used usb cable bought from the box , its own usb cable , it success without any error

here is the log

Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6610
Flash Type NOR
Flash ID 00C80040(00170000)
Flash Model GD25Q64
Flash Size 0x800000(8,0M)
Start Writing...
Write Done!

the problem is resolved. so only cable quality factor

sukses read BEYOND B28 Mstar
 

sukses read BEYOND B28 Mstar

http://i1256.photobucket.com/albums/...ps5697db9d.jpg

Succes rx tx spd code with mcn box
 

Succes rx tx spd with mcn box...Box volcano could not solve the case spd hahahahaha

http://i1256.photobucket.com/albums/...ps0219bcc4.jpg

http://i1256.photobucket.com/albums/...psa4a2ef6a.jpg

http://i1256.photobucket.com/albums/...psff922e55.jpg

thanks mcn boc team.

Welcome to use McnBox!
Selected COM7 COM8
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN20100416D0451
Firmware V1.15
Checksum C877-EFBE
Software V3.35
Box Connected!
Ready working at COM7
Checking USB Serial port, wait...
SCI USB2Serial Port: COM16
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU Info 6610
Flash Type NOR
Flash ID 00C80060(00170000)
Flash Model GD27LQ64
Flash Size 0x800000(8,0M)
Start Reading...
Read Error. ID: 1079_3

Format OK but stiil not effect in phone
Read error
Write and Unlock OK

SPD CPU 6610

nand Write error mT6235, but Read OK

format 6253 error

Connecting, wait...
Phone detected, wait..
CPU: 6253 Ver: 8A04 SW:8A00
Initialize Boot7 ...
Flash(Nor) Type [SAMSUNG] K5N2833ATB
Flash(Nor) Code 00EC2404(00000000)
Flash(Nor) Size 0x01000000 Hex Bytes
Start Formatting (Nor)...
Start Addr: 0xE00000, Size: 0x200000
Format ERR1

http://imageshack.us/a/img194/7889/6252e.jpg


same like that.....so many bugs

mcn pro didnt support mt625a chipset yet , i've just try

@mcn product supporter >>>>need your fast support thx for your kindness

Mtk 6252 format error

http://i50.tinypic.com/2cg0w0k.jpg

mt6516 read oke , can not be save

http://imageshack.us/a/img9/2966/651...ggabisadis.jpg

write imei oke

http://imageshack.us/a/img407/644/tulisimeiok.jpg

BR

Thanks for report, we will take time to check all the issues!

Mcnbox

Try with Boot9 brother;)

For Format ERR problem...I think it's a bugs....cause..if i try with manual address (same address with auto) it's working...and with v3.3.3 or v3.3.2..can formatting with auto address..;)