B3210 carby dead after flashing-recovered via opti flash

[.::koolfriend4u::.]

6/12/2011 2:49:31 AM SAMSUNG B3210 : 
                      [ --- CONNECTING TO THE PHONE --- ]
HARDWARE PLATFORM           : TRIDENT I
SETUP LOADER VERSION        : 02.00.07
MAIN LOADER VERSION         : 05.22.00
FLASH #1 TYPE               : INTEL 1024XX
FLASH #1 SIZE               : 67108864 BYTES
FLASH #2 TYPE               : INTEL 1024XX
FLASH #2 SIZE               : 67108864 BYTES
CHANGING BAUDRATE TO 460800 : COMPLETED
SETTING UP MAIN LOADER      : COMPLETED
 
                        [ --- WRITING MAIN FLASH --- ]
THERE ARE 38526290 BYTES IN 09 REGIONS TO WRITE
WRITING MAIN FLASH          : COMPLETED (00:23:26)
 
                       [ --- CREATING FILE SYSTEM --- ]
THERE ARE 13905872 BYTES IN 92 FILES TO WRITE
FORMATTING FILE SYSTEM      : FAILED

now phone in hang state..earlier it was good working,but in lock !!

Samsung B3210 CorbyTXT -Tutorial

In this Tutorial you can learn the right and easy steps to Update the firmware of Samsung B3210 CorbyTXT So read carefully and follow it one by one.

Tools : Samsung B3210 CorbyTXT Downloader - Original USB cable.

Flashing Steps :

1. Run Samsung B3210 CorbyTXT Downloader.
2. Select Customer T: Rodeo (Intel Sibley 1024/256, USB).
3. In Flash Option section check: Code Binary and CSC Binary(Default).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode: Press * and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. Select the S3 Flash file and CSC file too, each in his field.
8. Click on Flash button and type YES in the message box then click OK to Start the process.
9. Do not touch or remove the cable till the Program telsl you: All is Well.
10. Turn On the phone and do full reset by this code: *2767*3855#.

[nongmobile]

With pegasus you flash via usb or RJ.?

[nongmobile]

With pegasus you flash via usb or RJ.?

[fixed]

advice dont always trust instantly for new box they have no tested logs yet if i were you trust only those who already tested like ust pro ,ns pro, z3x..id experience also with there octupos and medusa theyre all new one will kill the unit after flash and the other will make it alive but its not perfect ,,,,,, till now my unit is still here hang up in logo before its ok i only unlock it in octopus after unlock its hang in logo as they told me to buy medusa to make it alive but after i bought till now my phone is in cyon logo only and they advice its hardware fault huhuhuhuhu
very dis appointing

[Sanchez]

Originally Posted by .::koolfriend4u::.

6/12/2011 2:49:31 AM SAMSUNG B3210 : 
                      [ --- CONNECTING TO THE PHONE --- ]
HARDWARE PLATFORM           : TRIDENT I
SETUP LOADER VERSION        : 02.00.07
MAIN LOADER VERSION         : 05.22.00
FLASH #1 TYPE               : INTEL 1024XX
FLASH #1 SIZE               : 67108864 BYTES
FLASH #2 TYPE               : INTEL 1024XX
FLASH #2 SIZE               : 67108864 BYTES
CHANGING BAUDRATE TO 460800 : COMPLETED
SETTING UP MAIN LOADER      : COMPLETED
 
                        [ --- WRITING MAIN FLASH --- ]
THERE ARE 38526290 BYTES IN 09 REGIONS TO WRITE
WRITING MAIN FLASH          : COMPLETED (00:23:26)
 
                       [ --- CREATING FILE SYSTEM --- ]
THERE ARE 13905872 BYTES IN 92 FILES TO WRITE
FORMATTING FILE SYSTEM      : FAILED

now phone in hang state..earlier it was good working,but in lock !!

Samsung B3210 CorbyTXT -Tutorial

In this Tutorial you can learn the right and easy steps to Update the firmware of Samsung B3210 CorbyTXT So read carefully and follow it one by one.

Tools : Samsung B3210 CorbyTXT Downloader - Original USB cable.

Flashing Steps :

1. Run Samsung B3210 CorbyTXT Downloader.
2. Select Customer T: Rodeo (Intel Sibley 1024/256, USB).
3. In Flash Option section check: Code Binary and CSC Binary(Default).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode: Press * and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. Select the S3 Flash file and CSC file too, each in his field.
8. Click on Flash button and type YES in the message box then click OK to Start the process.
9. Do not touch or remove the cable till the Program telsl you: All is Well.
10. Turn On the phone and do full reset by this code: *2767*3855#.

Hi, its happens sometimes that CSC flashing fails from first time. The solution is just to flash CSC only again using pegasus.

[.::koolfriend4u::.]

@Sanchez

Hi, its happens sometimes that CSC flashing fails from first time. The solution is just to flash CSC only again using pegasus.

as u mentioned here..i tired every other option...

tried vis usb..

tried via rj45(auto ignition cable)

tried to flash CSC file n seperate too..but it fails in all way

@fixed

hi bro..the fact is i tried tht phone in all other sam tools(ufs/z3x)..both via usb/r.j45,then tried by flashing one file at a time..in all cases it fails.

i made this thread,just not to blame pegasus works or to critises...

im making this,just to increase the power of pegasus (by cut through some minor bugs)

we all know..the new boxes will never come up with full bugs free..it took time to fix those bugs.

I AM WAITING FOR PEGASUS TEAM TO FIX THOSE BUGS AT THE EARLIEST


NOTE

PEGSUS TEAM SHOULD ADD FLASHING WITH ORIGINAL FILES(must needed) IN ADDITION TO PEGASUS FILE(PGS)...or atleast to make option to convert original files to pgs files

THANKS IN ADVANCE

[Sanchez]

Originally Posted by .::koolfriend4u::.

@Sanchez



as u mentioned here..i tired every other option...

tried vis usb..

tried via rj45(auto ignition cable)

tried to flash CSC file n seperate too..but it fails in all way

@fixed

hi bro..the fact is i tried tht phone in all other sam tools(ufs/z3x)..both via usb/r.j45,then tried by flashing one file at a time..in all cases it fails.

i made this thread,just not to blame pegasus works or to critises...

im making this,just to increase the power of pegasus (by cut through some minor bugs)

we all know..the new boxes will never come up with full bugs free..it took time to fix those bugs.

I AM WAITING FOR PEGASUS TEAM TO FIX THOSE BUGS AT THE EARLIEST


NOTE

PEGSUS TEAM SHOULD ADD FLASHING WITH ORIGINAL FILES(must needed) IN ADDITION TO PEGASUS FILE(PGS)...or atleast to make option to convert original files to pgs files

THANKS IN ADVANCE

Thanks for the info. Lets hope the bug will be fixed soon.

[jeffsha10]

pls upload the download link the download file

[Dipu Razz]

Originally Posted by .::koolfriend4u::.

6/12/2011 2:49:31 AM SAMSUNG B3210 : 
                      [ --- CONNECTING TO THE PHONE --- ]
HARDWARE PLATFORM           : TRIDENT I
SETUP LOADER VERSION        : 02.00.07
MAIN LOADER VERSION         : 05.22.00
FLASH #1 TYPE               : INTEL 1024XX
FLASH #1 SIZE               : 67108864 BYTES
FLASH #2 TYPE               : INTEL 1024XX
FLASH #2 SIZE               : 67108864 BYTES
CHANGING BAUDRATE TO 460800 : COMPLETED
SETTING UP MAIN LOADER      : COMPLETED
 
                        [ --- WRITING MAIN FLASH --- ]
THERE ARE 38526290 BYTES IN 09 REGIONS TO WRITE
WRITING MAIN FLASH          : COMPLETED (00:23:26)
 
                       [ --- CREATING FILE SYSTEM --- ]
THERE ARE 13905872 BYTES IN 92 FILES TO WRITE
FORMATTING FILE SYSTEM      : FAILED

now phone in hang state..earlier it was good working,but in lock !!

Samsung B3210 CorbyTXT -Tutorial

In this Tutorial you can learn the right and easy steps to Update the firmware of Samsung B3210 CorbyTXT So read carefully and follow it one by one.

Tools : Samsung B3210 CorbyTXT Downloader - Original USB cable.

Flashing Steps :

1. Run Samsung B3210 CorbyTXT Downloader.
2. Select Customer T: Rodeo (Intel Sibley 1024/256, USB).
3. In Flash Option section check: Code Binary and CSC Binary(Default).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode: Press * and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. Select the S3 Flash file and CSC file too, each in his field.
8. Click on Flash button and type YES in the message box then click OK to Start the process.
9. Do not touch or remove the cable till the Program telsl you: All is Well.
10. Turn On the phone and do full reset by this code: *2767*3855#.

it's an awosome idea to recover dead phone...and finally i recover that.good