Pegasus Box Wiki - GSM-Forum

Gsmserver · 08-22-2011, 16:03

Wiki is an open knowledge base. In this thread everyone is encouraged to contribute his own experience working with Pegasus box.
This thread is not for posting logs! It's purpose is illustrated step-by-step manuals and it will be strictly moderated.
So welcome everyone! GSM Server Team will also contribute some knowledge

_______________
WBR,
GSM Server Team

Sanchez · 08-23-2011, 17:39

[ --- I8700/I917/I917R Unlock Manual --- ]

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

Power on phone without simcard inside.
On phones keyboard type ##634# and press "Call" button. Diagnostic menu will appear.
On phones keyboard type *#7284# and select "Modem, USB Diag".
Wait untill phone restarts and fully starts up.
Connect phone to the cable, install drivers if required.
Start pegasus software.
Select I8700 from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
Select phones port from comport dropdown menu.
Click "Connect" button. Phones infromation and unlock codes will be read.
You may unlock phone by inputing unlock code manually or just click "Unlock" button.
Click "Disconnect" button.
In Case you have used original usb cable, type ##634# and press "Call" button. Diagnostic menu will appear. On phones keyboard type *#7284# and select "Zune mode".

Sanchez · 08-23-2011, 17:58

[ --- S5570/S5660/S5660M/S5830 Unlock Manual --- ]

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

Power on phone without simcard inside.
On phones keyboard type *#7284# and select "USB".
Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging"
Reboot the phone.
Connect phone to the cable, install drivers if required.
Start pegasus software.
Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
Select phones port from comport dropdown menu.
Click "Connect" button. Phones infromation and unlock codes will be read.
You may unlock phone by inputing unlock code manually or just click "Unlock" button.
Click "Disconnect" button.
On phones keyboard type *#7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"

Sanchez · 08-23-2011, 18:09

[ --- S5570/S5660/S5660M/S5830 IMEI Rebuild Manual --- ]

Attention IMEI Rebuild is illegal allmost in all countries!!! GSMServer Team included this feature only for purpose to restore phones with damaged IMEI. GSMServer does not takes any responsibility for use or misuse of this feature.

Cable type : Microusb UART or Original USB Data Cable

In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5.

Power on phone without simcard inside.
On phones keyboard type *#7284# and select "USB".
Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging"
Reboot the phone.
Connect phone to the cable, install drivers if required.
Start pegasus software.
Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button".
Select phones port from comport dropdown menu.
Click "Connect" button. Phones infromation and unlock codes will be read.
Press "CTRL+I", "IMEI Rebuild" button will be visible now. In IMEI field type IMEI you would like to write into the phone. Click "Rebuild IMEI" button.
Click "Disconnect" button.
On phones keyboard type *#7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"

rhamzky · 09-15-2011, 07:14

T669 unlocking

and Connect

rhamzky · 10-28-2011, 13:07

E2222 unlocked via UFS interface

Procedure:

insert UFS C3303k cable to phone without battery
Connect
insert battery to phone
unlock

08-22-2011, 16:03	#1 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,145 Member: 21077 Status: Offline Thanks Meter: 116,340	Pegasus Box Wiki Wiki is an open knowledge base. In this thread everyone is encouraged to contribute his own experience working with Pegasus box. This thread is not for posting logs! It's purpose is illustrated step-by-step manuals and it will be strictly moderated. So welcome everyone! GSM Server Team will also contribute some knowledge _______________ WBR, GSM Server Team Last edited by Gsmserver; 08-25-2011 at 15:56.

08-23-2011, 17:39	#2 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	I8700 Unlock Procedure [ --- I8700/I917/I917R Unlock Manual --- ] Cable type : Microusb UART or Original USB Data Cable In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5. Power on phone without simcard inside. On phones keyboard type ##634# and press "Call" button. Diagnostic menu will appear. On phones keyboard type #7284# and select "Modem, USB Diag". Wait untill phone restarts and fully starts up. Connect phone to the cable, install drivers if required. Start pegasus software. Select I8700 from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button". Select phones port from comport dropdown menu. Click "Connect" button. Phones infromation and unlock codes will be read. You may unlock phone by inputing unlock code manually or just click "Unlock" button. Click "Disconnect" button. In Case you have used original usb cable, type ##634# and press "Call" button. Diagnostic menu will appear. On phones keyboard type #7284# and select "Zune mode".

08-23-2011, 17:58	#3 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	[ --- S5570/S5660/S5660M/S5830 Unlock Manual --- ] Cable type : Microusb UART or Original USB Data Cable In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5. Power on phone without simcard inside. On phones keyboard type #7284# and select "USB". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging" Reboot the phone. Connect phone to the cable, install drivers if required. Start pegasus software. Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button". Select phones port from comport dropdown menu. Click "Connect" button. Phones infromation and unlock codes will be read. You may unlock phone by inputing unlock code manually or just click "Unlock" button. Click "Disconnect" button. On phones keyboard type #7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"

08-23-2011, 18:09	#4 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	[ --- S5570/S5660/S5660M/S5830 IMEI Rebuild Manual --- ] Attention IMEI Rebuild is illegal allmost in all countries!!! GSMServer Team included this feature only for purpose to restore phones with damaged IMEI. GSMServer does not takes any responsibility for use or misuse of this feature. Cable type : Microusb UART or Original USB Data Cable In case you are using microusb uart cable you may skip steps 1-4 of manual and start with step 5. Power on phone without simcard inside. On phones keyboard type #7284# and select "USB". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Enable "USB Debugging" Reboot the phone. Connect phone to the cable, install drivers if required. Start pegasus software. Select phones model from the model list or type model name manually. Press "ENTER" button or click "Create New Module Button". Select phones port from comport dropdown menu. Click "Connect" button. Phones infromation and unlock codes will be read. Press "CTRL+I", "IMEI Rebuild" button will be visible now. In IMEI field type IMEI you would like to write into the phone. Click "Rebuild IMEI" button. Click "Disconnect" button. On phones keyboard type #7284# and select "PDA". Goto "Menu" -> "Settings" -> "Applications" -> "Development". Disable "USB Debugging"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i WANT TO BUY NOKIA BOX !!!	Eric	Wanted Products	8	02-14-2011 13:23
NOKEY BOX FOR SALE - FULL	Zorz	Main Sales Section	0	12-05-2000 10:56
New NOKIA BOX - New Prices	gsmEsteve	Main Sales Section	0	12-03-2000 03:43
New Nokia BOX for you!!!	gsmEsteve	Main Sales Section	0	11-18-2000 17:09

09-15-2011, 07:14	#5 (permalink)
rhamzky Freak Poster Join Date: Feb 2008 Location: philippines Posts: 159 Member: 711498 Status: Offline Thanks Meter: 72	T669 unlocking and Connect

10-28-2011, 13:07	#6 (permalink)
rhamzky Freak Poster Join Date: Feb 2008 Location: philippines Posts: 159 Member: 711498 Status: Offline Thanks Meter: 72	E2222 unlocked via UFS interface Procedure: insert UFS C3303k cable to phone without battery Connect insert battery to phone unlock