Pegasus box how it WORKS INFO - GSM-Forum

FullFlash[SAM] · 05-01-2011, 04:17

Screencasts

In this section you can witness Pegasus box functionality

Mr.Tinkertrain · 05-04-2011, 08:20

Subscribe to our YouTube channel

___
Best Regards
GsmServer Team

Gsmserver · 05-04-2011, 12:47

Samsung S5200 unlock with Pegasus Box

FullFlash[SAM] · 05-05-2011, 00:53

FullFlash[SAM] · 06-10-2011, 01:46

Service Mode Explanation

The “HELP” button is used to open Help file for the Pegasus software.

The “COPY TO CLIPBOARD” button copies all available info from the log file to Windows clipboard. It allows you to copy all required information to any *.txt file or messenger window.

The “SAVE LOG TO FILE” button is used to save operation logs of the Pegasus software to *.txt files. Log files are saved in the “LOGS” subfolder of the Pegasus installation folder. Files are automatically named as “Brandname dd.mm.yyyy. hh_mm_ss.log”. You may use this button to save the log information and send it to the Support Team if you encounter any technical problems.

The “CLEAR LOG” button erases all data from the log window.

The “CLOSE MODULE WINDOW” button closes active module window. Please note that all active procedures will be terminated if the module closes.

The “COM PORT” drop-down list is used to select an operation port. Pegasus software communicates through any interface that can create a virtual COM port on a PC. Native COM1 and USB operation is also supported.

The “BAUDRATE” drop-down menu is used to select operation speed. The higher speed is selected, the faster will the flashing procedure be.

The “IMEI” button reads IMEI number of the phone. It is an active window.

The “SN” button reads serial number of the handset. It is an active window.

FullFlash[SAM] · 06-10-2011, 01:49

The “WRITE FLASH” button starts the flashing procedure. Before flashing, mark the file parts that should be written. Gray (inactive) checkboxes mean that flash image does not contain corresponding flash parts. It is recommended to flash all flash parts to avoid handset software malfunction.

The “READ FLASH” button is used to dump handset flash memory into a .FLB file. This file format is used for debugging procedures. Please don’t send us backup files each time you have a problem, use this function upon our request only.

The “ERASE FLASH” button is used to erase firmware of a phone, including user data.

The ”Read Codes” button is used for reading unlock codes from the pnx490x based phone models in the flash mode.

The “CLOSE MODULE WINDOW” closes the module window.

FullFlash[SAM] · 06-10-2011, 01:51

Pegasus Unlock Procedure Tutorial

1. Start the Pegasus software

2. Choose an appropriate phone brand and a model from the drop-down list.

3. Create a new module with a selected phone model.

4. Select the COM Port that your phone is connected to.

5. Press the “CONNECT” button to prepare a phone for servicing operations and connect it to the Pegasus software.

6. Service operations require an Internet connection for a smart-card authorization on a server. After a successful authorization you will see a window as shown below. At this point you will have to press Power On button on a phone keypad. Make sure that your phone is connected via cable.

7. After connecting a phone to a cable in a log window you will see the phone information such as the firmware version, IMEI, BT address, state of locks, lock codes etc.

8. To unlock your phone click the “UNLOCK” button.

9. The software will establish a connection to a server and will get re-authorized. Unlock procedure will start after the authorization process is complete.

FullFlash[SAM] · 06-10-2011, 01:51

10. An unlock procedure lasts for 4 seconds.

11. To complete an unlock procedure click the “DISCONNECT” button.

12. After the procedure the phone can be disconnected.

FullFlash[SAM] · 06-10-2011, 01:52

Creating a Backup Copy

1. Start the Pegasus software

2. Choose the required phone brand and model from the drop-down list.

3. Create a new module with the selected phone model

4. Switch to the Flash mode

5. Select a COM Port that your phone is connected to.

6. Click the “READ FLASH” button

7. Pegasus software will read phone information

8. Backup save procedure will start.

9. After the procedure phone can be disconnected.

FullFlash[SAM] · 06-10-2011, 01:53

Flash Procedure

1. Start Pegasus software

2. Choose the required phone brand and model from the drop-down list.

3. Create a new module with the required phone model selected

4. Switch to a flash mode

5. Select COM port the handset is connected to

6. Click the “Open Flash Image” button

7. Select the required firmware version/versions and click the “Open” button or just double-click the required file.

8. Pegasus uses its own flash files format named the .PGS, which is the special file that contains all flash file parts. To select required flash parts you just have to tick checkboxes on the right side of the “Flash Image” button. To begin the flash procedure, click the “Flash Image” button.

9. Press and hold the “Power On” button as soon as the software instructs you to do so.

FullFlash[SAM] · 06-10-2011, 01:53

10. This will start the Flash procedure

11. Flash procedure consist of several stages

12. After all stages completion the Flash procedure will finish.

FullFlash[SAM] · 06-10-2011, 01:53

Rebuild IMEI

1. Start Pegasus software.

2. Choose the required phone brand and model from a drop-down list.

3. Create a new module with the selected phone model

4. Select the COM Port that your phone is connected to

5. Click the “CONNECT” button to prepare phone for servicing operations and connect it to the Pegasus software.

6. Service operations require Internet connection for the smart-card authorization on server. After a successful authorization you will see a window. At this point you have to press the “Power On” button on a phone keypad. Make sure that your phone is connected via cable.

7. After connecting the phone user can see the phone firmware version, IMEI, BT address, state of locks, lock codes etc. in a log window.

8. Type the Required IMEI number in the IMEI field and click the “Rebuild IMEI” button

FullFlash[SAM] · 06-10-2011, 01:53

9. Software connects to the server and Rebuild IMEI procedure starts

10. The Rebuild IMEI procedure lasts for 2 seconds

11. After the procedure is completed, click the “Disconnect phone” button

12. This concludes the Rebuild IMEI procedure.

FullFlash[SAM] · 06-10-2011, 01:54

paffka · 06-10-2011, 10:01

FullFlash[SAM], you've done a big job, but this manual already placed in the Pegasusbox.COM as well as screencasts

05-01-2011, 04:17	#1 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Pegasus box how it WORKS INFO Screencasts In this section you can witness Pegasus box functionality How to read unlock codes Samsung E2550 with Pegasus box How to read unlock codes Samsung S3370 with Pegasus box How to unlock Samsung T249 with Pegasus box How to unlock, flash, repair IMEI Samsung E1081T with Pegasus box How to repair Samsung i5700 IMEI with Pegasus box How to repair Samsung i8910 IMEI with Pegasus How to repair Samsung i8000 IMEI with Pegasus box

05-05-2011, 00:53	#4 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	S8530 unlock S5260 unlock Pegasus multitasking S7070 unlock E250V unlock M150 unlock

06-10-2011, 01:46	#5 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Help center how to do Service Mode Explanation The “HELP” button is used to open Help file for the Pegasus software. The “COPY TO CLIPBOARD” button copies all available info from the log file to Windows clipboard. It allows you to copy all required information to any .txt file or messenger window. The “SAVE LOG TO FILE” button is used to save operation logs of the Pegasus software to .txt files. Log files are saved in the “LOGS” subfolder of the Pegasus installation folder. Files are automatically named as “Brandname dd.mm.yyyy. hh_mm_ss.log”. You may use this button to save the log information and send it to the Support Team if you encounter any technical problems. The “CLEAR LOG” button erases all data from the log window. The “CLOSE MODULE WINDOW” button closes active module window. Please note that all active procedures will be terminated if the module closes. The “COM PORT” drop-down list is used to select an operation port. Pegasus software communicates through any interface that can create a virtual COM port on a PC. Native COM1 and USB operation is also supported. The “BAUDRATE” drop-down menu is used to select operation speed. The higher speed is selected, the faster will the flashing procedure be. The “IMEI” button reads IMEI number of the phone. It is an active window. The “SN” button reads serial number of the handset. It is an active window.

06-10-2011, 01:54	#14 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	How to read unlock codes in Samsung S3370 with PegasusBox How to repair Samsung i8000 IMEI with PegasusBox How to repair Samsung i8910 IMEI with PegasusBox How to repair Samsung i5700 IMEI with PegasusBox How to unlock, flash, repair IMEI in Samsung E1081T with PegasusBox How to unlock Samsung T249 with PegasusBox How to read unlock codes in Samsung S8530 with PegasusBox How to unlock Samsung S7070 with PegasusBox How to unlock Samsung S5200 with PegasusBox How to unlock Samsung E250V with PegasusBox How to unlock Samsung M150 with PegasusBox How to unlock Samsung S5260 with PegasusBox How to read codes in Samsung E2550 with PegasusBox How to read codes in Samsung S8500 with PegasusBox How to unlock Samsung S5250 Wave with PegasusBox

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-04-2011, 08:20	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	Subscribe to our YouTube channel ___ Best Regards GsmServer Team

05-04-2011, 12:47	#3 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,130 Member: 21077 Status: Offline Thanks Meter: 116,278	Samsung S5200 unlock with Pegasus Box

06-10-2011, 01:49	#6 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	The “WRITE FLASH” button starts the flashing procedure. Before flashing, mark the file parts that should be written. Gray (inactive) checkboxes mean that flash image does not contain corresponding flash parts. It is recommended to flash all flash parts to avoid handset software malfunction. The “READ FLASH” button is used to dump handset flash memory into a .FLB file. This file format is used for debugging procedures. Please don’t send us backup files each time you have a problem, use this function upon our request only. The “ERASE FLASH” button is used to erase firmware of a phone, including user data. The ”Read Codes” button is used for reading unlock codes from the pnx490x based phone models in the flash mode. The “CLOSE MODULE WINDOW” closes the module window.

06-10-2011, 01:51	#7 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Pegasus Unlock Procedure Tutorial 1. Start the Pegasus software 2. Choose an appropriate phone brand and a model from the drop-down list. 3. Create a new module with a selected phone model. 4. Select the COM Port that your phone is connected to. 5. Press the “CONNECT” button to prepare a phone for servicing operations and connect it to the Pegasus software. 6. Service operations require an Internet connection for a smart-card authorization on a server. After a successful authorization you will see a window as shown below. At this point you will have to press Power On button on a phone keypad. Make sure that your phone is connected via cable. 7. After connecting a phone to a cable in a log window you will see the phone information such as the firmware version, IMEI, BT address, state of locks, lock codes etc. 8. To unlock your phone click the “UNLOCK” button. 9. The software will establish a connection to a server and will get re-authorized. Unlock procedure will start after the authorization process is complete.

06-10-2011, 01:51	#8 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	10. An unlock procedure lasts for 4 seconds. 11. To complete an unlock procedure click the “DISCONNECT” button. 12. After the procedure the phone can be disconnected.

06-10-2011, 01:52	#9 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Creating a Backup Copy 1. Start the Pegasus software 2. Choose the required phone brand and model from the drop-down list. 3. Create a new module with the selected phone model 4. Switch to the Flash mode 5. Select a COM Port that your phone is connected to. 6. Click the “READ FLASH” button 7. Pegasus software will read phone information 8. Backup save procedure will start. 9. After the procedure phone can be disconnected.

06-10-2011, 01:53	#10 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Flash Procedure 1. Start Pegasus software 2. Choose the required phone brand and model from the drop-down list. 3. Create a new module with the required phone model selected 4. Switch to a flash mode 5. Select COM port the handset is connected to 6. Click the “Open Flash Image” button 7. Select the required firmware version/versions and click the “Open” button or just double-click the required file. 8. Pegasus uses its own flash files format named the .PGS, which is the special file that contains all flash file parts. To select required flash parts you just have to tick checkboxes on the right side of the “Flash Image” button. To begin the flash procedure, click the “Flash Image” button. 9. Press and hold the “Power On” button as soon as the software instructs you to do so.

06-10-2011, 01:53	#11 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	10. This will start the Flash procedure 11. Flash procedure consist of several stages 12. After all stages completion the Flash procedure will finish.

06-10-2011, 01:53	#12 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	Rebuild IMEI 1. Start Pegasus software. 2. Choose the required phone brand and model from a drop-down list. 3. Create a new module with the selected phone model 4. Select the COM Port that your phone is connected to 5. Click the “CONNECT” button to prepare phone for servicing operations and connect it to the Pegasus software. 6. Service operations require Internet connection for the smart-card authorization on server. After a successful authorization you will see a window. At this point you have to press the “Power On” button on a phone keypad. Make sure that your phone is connected via cable. 7. After connecting the phone user can see the phone firmware version, IMEI, BT address, state of locks, lock codes etc. in a log window. 8. Type the Required IMEI number in the IMEI field and click the “Rebuild IMEI” button

06-10-2011, 01:53	#13 (permalink)
FullFlash[SAM] No Life Poster Join Date: Mar 2011 Location: Manila,Philippines Posts: 1,370 Member: 1536588 Status: Offline Sonork: 100.1613366 Thanks Meter: 480	9. Software connects to the server and Rebuild IMEI procedure starts 10. The Rebuild IMEI procedure lasts for 2 seconds 11. After the procedure is completed, click the “Disconnect phone” button 12. This concludes the Rebuild IMEI procedure.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Need info for unliocking 2 lock (with pic microprocesors)	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-26-1999 01:00
how the **** do i make wintesla 6.03 work	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-1999 08:41

06-10-2011, 10:01	#15 (permalink)
paffka No Life Poster Join Date: Dec 2005 Posts: 859 Member: 212116 Status: Offline Thanks Meter: 178	FullFlash[SAM], you've done a big job, but this manual already placed in the Pegasusbox.COM as well as screencasts