Sc-03e - GSM-Forum

nang · 03-04-2013, 08:47

Hello master

how are you, i want to unlock sc-03e, but i follow the instruction *#7284#, but the phone no any response?

Please guide me to unlock.

Thank you

nang

PegasusBox · 03-04-2013, 15:45

To connect SC-03E phone You have to perform the following steps:

Go to Menu->Settings->Developer options.
Turn on "USB Debugging" option.
When message is appear press "Yes".
Go to dial window.
Enter "*#7284#" number.
Set UART to "PDA"
Select "Qualcomm USB Settings"
Select "DM+MODEM+ADB" and press "OK"
Restart phone using power button (don't take out battery!)
Install required drivers, if prompted
Click "Connect Button" in Pegasus software

Best Regards
GSMServer team

nang · 03-05-2013, 03:39

Hello master

how are you, i follow step 1 to 5, but after *#7284# phone did not show any setting?

Nang

PegasusBox · 03-05-2013, 12:58

@ nang,

Try to enter code *#9090# instead of the *#7284# and after that perform all steps as it is signed in the manual. After that post results here.
Also, please sign whether IMEI number can be signed at the screen after typing *#06#.

Best Regards
GSMServer team

nang · 03-06-2013, 05:32

Hello master

how are you, i tested *#9090#, it same no response, and i tested imei, after *#06#, it show imei number. Normal.

Nang

PegasusBox · 03-06-2013, 11:33

@ nang,

Try to perform following operations:

Make Factory reset
Run whole operation using *#7284# code
If it doesn't work try to connect phone using *#9090# code
Post results here

Best Regards
GSMServer team

nang · 03-07-2013, 07:45

Quote:

Originally Posted by pegasusbox

@ nang,

try to perform following operations:

make factory reset
run whole operation using *#7284# code
if it doesn't work try to connect phone using *#9090# code
post results here

best regards
gsmserver team

hello master

how are you, i did all the following, but not work, any other idea?

Nang

sharmin · 04-06-2013, 19:22

@nang
SC-03E *#7284# not working ???

try it !!!)

really it seems hard but there is a small trick ... that make too much easy !!!
just change ur sc-03e home screen to ''touchwiz easy mode'' and then ur dialer pad colour will also change with that settings (white to black) and

... now the command working with charm !!! test now

Sanchez · 04-12-2013, 15:22

Or select samsung dialer in phones menu, and code will be accepted.

lotfigsm2 · 05-22-2014, 20:25

@nang
SC-03E *#7284# not working ??? try it !!!)

really it seems hard but there is a small trick ... that make too much easy !!!
just change ur sc-03e home screen to ''touchwiz easy mode'' and then ur dialer pad colour will also change with that settings (white to black) and ... now the command working with charm !!! test no
teste 100/100

03-04-2013, 08:47	#1 (permalink)
nang Freak Poster Join Date: Apr 2004 Age: 44 Posts: 247 Member: 62154 Status: Offline Thanks Meter: 17	Sc-03e Hello master how are you, i want to unlock sc-03e, but i follow the instruction *#7284#, but the phone no any response? Please guide me to unlock. Thank you nang

03-04-2013, 15:45	#2 (permalink)
PegasusBox Freak Poster Join Date: Apr 2011 Posts: 443 Member: 1565828 Status: Offline Thanks Meter: 76	To connect SC-03E phone You have to perform the following steps: Go to Menu->Settings->Developer options. Turn on "USB Debugging" option. When message is appear press "Yes". Go to dial window. Enter "*#7284#" number. Set UART to "PDA" Select "Qualcomm USB Settings" Select "DM+MODEM+ADB" and press "OK" Restart phone using power button (don't take out battery!) Install required drivers, if prompted Click "Connect Button" in Pegasus software Best Regards GSMServer team

03-06-2013, 11:33	#6 (permalink)
PegasusBox Freak Poster Join Date: Apr 2011 Posts: 443 Member: 1565828 Status: Offline Thanks Meter: 76	@ nang, Try to perform following operations: Make Factory reset Run whole operation using #7284# code If it doesn't work try to connect phone using #9090# code Post results here Best Regards GSMServer team

03-05-2013, 12:58	#4 (permalink)
PegasusBox Freak Poster Join Date: Apr 2011 Posts: 443 Member: 1565828 Status: Offline Thanks Meter: 76	@ nang, Try to enter code #9090# instead of the #7284# and after that perform all steps as it is signed in the manual. After that post results here. Also, please sign whether IMEI number can be signed at the screen after typing *#06#. Best Regards GSMServer team

03-06-2013, 05:32	#5 (permalink)
nang Freak Poster Join Date: Apr 2004 Age: 44 Posts: 247 Member: 62154 Status: Offline Thanks Meter: 17	Hello master how are you, i tested #9090#, it same no response, and i tested imei, after #06#, it show imei number. Normal. Nang

04-06-2013, 19:22	#8 (permalink)
sharmin No Life Poster Join Date: Jan 2006 Location: Mirpur-1, Dhaka,Bangladesh Posts: 1,786 Member: 222009 Status: Offline Sonork: 100.1576751 Thanks Meter: 435	@nang SC-03E *#7284# not working ??? try it !!!) really it seems hard but there is a small trick ... that make too much easy !!! just change ur sc-03e home screen to ''touchwiz easy mode'' and then ur dialer pad colour will also change with that settings (white to black) and ... now the command working with charm !!! test now

04-12-2013, 15:22	#9 (permalink)
Sanchez No Life Poster Join Date: Aug 2000 Posts: 1,231 Member: 1896 Status: Offline Thanks Meter: 101	Or select samsung dialer in phones menu, and code will be accepted.

05-22-2014, 20:25	#10 (permalink)
lotfigsm2 Insane Poster Join Date: Mar 2008 Location: tunis Posts: 79 Member: 716894 Status: Offline Thanks Meter: 18	@nang SC-03E *#7284# not working ??? try it !!!) really it seems hard but there is a small trick ... that make too much easy !!! just change ur sc-03e home screen to ''touchwiz easy mode'' and then ur dialer pad colour will also change with that settings (white to black) and ... now the command working with charm !!! test no teste 100/100