2630 57.20 unlocking no signal - GSM-Forum

alvis · 02-23-2010, 19:47

hi all,
i have a problem with 2630 i unlock that phone but after no signal i flash it with its orignal product code same problem i erase that phone then flash again with orignal product code same position i also wright a pm file but same result i did not understand whats the problem i also use ub,cyclone and other boxes but no success i also use all methoed which is written in this forum like flash with orignal product code unlock with latest cyclone,ub and mxkey software with updated box
its hardware id (upp id) is 3162 and phone orignal version is 57.20 and product code is 0582682 and its from vodafone uk
now tell me its a old upp id with new version thats why or i have to right a special pm file for that 57.20 version which is diffrent from simple 2630 or some think else
a refernse for old post which i read for this problem and i use that metheod is
http://forum.gsmhosting.com/vbb/showthread.php?t=838315
http://forum.gsmhosting.com/vbb/showthread.php?t=853227
and also some other plz tell orignal facts about that
thanx in advance
sarmad alvi

alvis · 02-24-2010, 09:49

here is no product supporter to tell me what can i do for that????

br
sarmad alvi

Mohsin-* · 02-24-2010, 09:53

wrie this pm and post result

alvis · 02-24-2010, 10:08

yes i wright that pm file but not solve also i have two pcs and both are new
br
sarmad alvi

alvis · 02-24-2010, 14:35

@all forum members how r facing this problem
i have simple methoed for that problem if the hardware id (upp id) is 3162 u can wright 6.xx or downgrade it and if u have hardware id (upp id) is 3168 u have to wright 7.xx or higher like 57.20
regards
.::SARMAD ALVI::.

denard · 04-08-2010, 09:02

i have the same problem yesterday with 2630 sw 5.61 after write good pm still no network. i even use hwk to write pm but no way. this situation arrive me because have problem with my hwk before use mxkeyif not i always use hwk for such phone!

sagarka · 04-29-2010, 00:47

alvis do u have solve yours problem or if n e body know how to solve this problem then plz share

02-23-2010, 19:47	#1 (permalink)
alvis Freak Poster Join Date: Oct 2004 Location: Pakistan Posts: 490 Member: 87676 Status: Offline Thanks Meter: 114	2630 57.20 unlocking no signal hi all, i have a problem with 2630 i unlock that phone but after no signal i flash it with its orignal product code same problem i erase that phone then flash again with orignal product code same position i also wright a pm file but same result i did not understand whats the problem i also use ub,cyclone and other boxes but no success i also use all methoed which is written in this forum like flash with orignal product code unlock with latest cyclone,ub and mxkey software with updated box its hardware id (upp id) is 3162 and phone orignal version is 57.20 and product code is 0582682 and its from vodafone uk now tell me its a old upp id with new version thats why or i have to right a special pm file for that 57.20 version which is diffrent from simple 2630 or some think else a refernse for old post which i read for this problem and i use that metheod is http://forum.gsmhosting.com/vbb/showthread.php?t=838315 http://forum.gsmhosting.com/vbb/showthread.php?t=853227 and also some other plz tell orignal facts about that thanx in advance sarmad alvi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2630 57.20 unlocking no signal	alvis	Cyclonebox	18	02-18-2013 11:01
2630 57.20 unlocking no signal	alvis	Universalbox	10	02-24-2010 15:43
2630 57.20 unlock successfully	gsmexpertgsmexp	Cyclonebox	2	09-16-2009 12:33
2630 57.20 unlock done	bhoybits99	Cyclonebox	8	05-30-2009 15:12

02-24-2010, 09:49	#2 (permalink)
alvis Freak Poster Join Date: Oct 2004 Location: Pakistan Posts: 490 Member: 87676 Status: Offline Thanks Meter: 114	here is no product supporter to tell me what can i do for that???? br sarmad alvi

02-24-2010, 10:08	#4 (permalink)
alvis Freak Poster Join Date: Oct 2004 Location: Pakistan Posts: 490 Member: 87676 Status: Offline Thanks Meter: 114	yes i wright that pm file but not solve also i have two pcs and both are new br sarmad alvi

02-24-2010, 14:35	#5 (permalink)
alvis Freak Poster Join Date: Oct 2004 Location: Pakistan Posts: 490 Member: 87676 Status: Offline Thanks Meter: 114	@all forum members how r facing this problem i have simple methoed for that problem if the hardware id (upp id) is 3162 u can wright 6.xx or downgrade it and if u have hardware id (upp id) is 3168 u have to wright 7.xx or higher like 57.20 regards .::SARMAD ALVI::.

04-08-2010, 09:02	#6 (permalink)
denard No Life Poster Join Date: Feb 2005 Location: BAHOUAN Posts: 3,251 Member: 118601 Status: Offline Thanks Meter: 200	i have the same problem yesterday with 2630 sw 5.61 after write good pm still no network. i even use hwk to write pm but no way. this situation arrive me because have problem with my hwk before use mxkeyif not i always use hwk for such phone!

04-29-2010, 00:47	#7 (permalink)
sagarka Freak Poster Join Date: Apr 2003 Location: uk Age: 43 Posts: 489 Member: 26606 Status: Offline Thanks Meter: 6	alvis do u have solve yours problem or if n e body know how to solve this problem then plz share