2690 security test failed.. ## - GSM-Forum

peter002 · 10-21-2011, 10:17

how to solve this fone????

Code:

Phone type: RM-635 (Nokia 2690)
SW version: V 10.65 09-12-10 RM-635 (c) Nokia             
Imei plain: 35341004731723-9
Product code: 0592524
Battery voltage: 4885 mV, current: 77 mA
Language Pack:
- not available.

Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: 353410047317239
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

i hav try everything....

writting full pm
load rf/bb from server
write rpl without npc..
erase full fone and write all again..

plz hlp

gbluez · 10-21-2011, 13:53

you don't do it correctly.

make sure you're using 3.5rev.1.4:
- press repair SD, follow on screen message. all be done in one click.

peter002 · 10-22-2011, 05:38

Quote:

Originally Posted by gbluez

you don't do it correctly.

make sure you're using 3.5rev.1.4:
- press repair SD, follow on screen message. all be done in one click.

hav done that toooo. but still same any suggesssion?????

specta · 10-22-2011, 05:42

back up rpl for safety first, then try recover certificate, it works on some cases

good luck bro

br

marwat1990 · 10-22-2011, 05:47

Quote:

Originally Posted by peter002

how to solve this fone????

Code:

Phone type: RM-635 (Nokia 2690)
SW version: V 10.65 09-12-10 RM-635 (c) Nokia             
Imei plain: 35341004731723-9
Product code: 0592524
Battery voltage: 4885 mV, current: 77 mA
Language Pack:
- not available.
 
Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: 353410047317239
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

i hav try everything....

writting full pm
load rf/bb from server
write rpl without npc..
erase full fone and write all again..

plz hlp

Try to authorized good pm file then write to phone will be ok..

specta · 10-22-2011, 05:53

Quote:

Originally Posted by marwat1990

Try to authorized good pm file then write to phone will be ok..

file from server is an authorized one bro

br

-=Meltech09=- · 10-22-2011, 05:58

hi..,

can you please perform bb5 certificate validation..

i guess there's a problem..one of this data.. hwc, npc..etc..

yolem053 · 10-23-2011, 15:49

1st you have to repair superdongle key 2nd authenticate SD 3rd write PM 1 and 309 your problem will be solved.

BIGUNLOCKSERVER · 10-23-2011, 17:10

Yes,Repair Sd First, Or Use Mxbox For Standalone Fetures

peter002 · 10-24-2011, 03:39

Quote:

Originally Posted by -=Meltech09=-

hi..,

can you please perform bb5 certificate validation..

i guess there's a problem..one of this data.. hwc, npc..etc..

YOU WERE RIGHT .... I HAV ALREADY DONE THAT. THE PRD CODE IN HWC AND CCC WERE MISMACHED... repaired now and the security test is shown passed now.. but fone shows nokia hen off.. i usd 10.65 version fo flashing.. what shud i do ??? soon i will post the log here..

Vijay dts · 10-27-2011, 16:26

Try this, it works for me

Click load form server in PM settings, click superdongle authorize, then click write

It works perfectly for me

10-23-2011, 17:10	#9 (permalink)
BIGUNLOCKSERVER Freak Poster Join Date: Mar 2011 Location: in BIGSERVER Posts: 390 Member: 1542932 Status: Offline Sonork: 100.1621006 Thanks Meter: 53	Yes,Repair Sd First, Or Use Mxbox For Standalone Fetures Last edited by BIGUNLOCKSERVER; 10-23-2011 at 17:19.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Security Code	dESiRE!	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	05-13-2011 22:17
5110 Security Code Help!	cahrisma	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	07-05-2010 09:04
Nokia 5110 v. 5.24 Unlock Failed!	Cybertooth	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	02-28-2000 15:35
SECURITY CODE	AWLABA	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	02-22-2000 23:38
Mti init failed	dogbreak	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-22-1999 01:28

10-21-2011, 13:53	#2 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	you don't do it correctly. make sure you're using 3.5rev.1.4: - press repair SD, follow on screen message. all be done in one click.

10-22-2011, 05:42	#4 (permalink)
specta No Life Poster Join Date: Oct 2009 Posts: 1,130 Member: 1149800 Status: Offline Thanks Meter: 211	back up rpl for safety first, then try recover certificate, it works on some cases good luck bro br

10-22-2011, 05:58	#7 (permalink)
-=Meltech09=- Freak Poster Join Date: Jul 2009 Location: Inside Softwa®e™ Posts: 247 Member: 1084363 Status: Offline Thanks Meter: 109	hi.., can you please perform bb5 certificate validation.. i guess there's a problem..one of this data.. hwc, npc..etc..

10-23-2011, 15:49	#8 (permalink)
yolem053 Freak Poster Join Date: Jan 2006 Location: Maniki Kapalong Norht Davao Posts: 336 Member: 227348 Status: Offline Sonork: yolem053 Thanks Meter: 44	1st you have to repair superdongle key 2nd authenticate SD 3rd write PM 1 and 309 your problem will be solved.

10-27-2011, 16:26	#11 (permalink)
Vijay dts Freak Poster Join Date: Jun 2010 Location: Tirunelveli, Tamil nadu, India Age: 38 Posts: 410 Member: 1323194 Status: Offline Thanks Meter: 61	Try this, it works for me Click load form server in PM settings, click superdongle authorize, then click write It works perfectly for me