2700c rm 561 only vibrate (ANSWERED)
 

here is the log

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0854381
Using device: HTI, FW ver: 00.24, SN: 0000248E
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19045(08-10-2011), Library ver: 1.0.0.12920(08-10-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 10800210937D4950D63DF0B3C11DAEC10BECA8A0
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 0089 8982 - 0000 8A31 [Intel NU48F512,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3EA22A1DDA660002E56108DB5072A10F8709443F
TransmissionMode: DDR&TX2
Processing MCU file: rm561__09.98.mcusw
[BB5,BB5 ALGORITHM] size: 19.41 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 50.735 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 3EA22A1D [RAP Certificate 202 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 1 min 29.656 s
Processing PPM file: rm561__09.98.ppm_mh
[BB5,BB5 ALGORITHM] size: 6.23 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 37.750 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 26.875 s
Processing CNT file: rm561__09.98_005.image_mh_ctv_in_v2_9b0g7
[BB5,BB5 ALGORITHM] page size: 128 K size: 7.88 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 2 min 36.750 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 35.406 s
Total time for flashing process(boot+erase+write) was 7 min 57.250 s

Phone type: RM-561 (Nokia 2700 classic)
SW version: V 09.98 06-09-10 RM-561 (c) Nokia
Imei plain: 35153204228920-4
Battery voltage: 4305 mV, current: 165 mA
Language Pack:
- not available.

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed


SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!


pls tell me what can be done here........

SL3 tampered simlock:
presss restore IMEI if you have any backup.
and if no:
contact Fast Unlocking
make deal and send to him your .ask file.

http://forum.gsmhosting.com/vbb/atta...1&d=1312117009

anyway, please update your mobileex. use 3.5rev1.5 now.
http://forum.gsmhosting.com/vbb/f550...hread-1378774/