3110 security test feild (ANSWERED)
 

updated rf bb Phone type: RM-237 (Nokia 3110c)
SW version: V 07.30 07-05-09 RM-237 (c) Nokia.
Imei plain: 35193903044492-5
Battery voltage: 4957 mV, current: 56 mA
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 351939030444925
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
with server still security test feiald

Did u try pmm auth and then write pm ( 1 and 309 only)?

yes
 

already tried pmm authe

problem solved
 

just updated mxkey and write rf bb with pmm athe
i dont know how but it workd

1. first backup rpl ( go > imei and security tab > imei rebuild > backup rpl)
2. erase old pm ( go > pm tab > erase )
3. Reset npc data ( go> imei and security tab> reset NPC data)( must backup rpl before do this)
4. Erase pm again (go > pm tab > erase )
5.Write rpl from backup ( go > imei and security tab > imei rebuild > restore imei)
6. go pm tab > super sd auth or pmm auth > than write good or modified pm ( must need pm 1 & 309)

7. erase pm again

8. Recover CERT ( go>imei and security tab> imei rebuild > recover cert)
9. give full factory reset


your phone must come back from security test failed
it is 100% tasted by me.

post result.


br,
mahabub

Solution---- tick on load rfbb from server..then click on write


tested by me in 3 sets.........

hai i am siva i am using nokia 3110c i have done restore setting factory after restore setting factory done i lost all the contact can u help to reterive the contact i am living in chennai now i am suffering bcoz i lost all the contact
my mail id is [email protected] please replay me

tested by me too...............

use HTI, all be done in ONE CLICK after you press repair SD.