GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > MXKEY (by Alim Hape) > MXKEY Nokia Flasher and Unlocker (by Alim Hape)
Reload this Page Nokia 5310 not possible to repair damage Section (ANSWERED)
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
 
LinkBack Thread Tools Display Modes
Old 01-22-2012, 05:23   #1 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Exclamation Nokia 5310 not possible to repair damage Section (ANSWERED)

Nokia 5310 not possible to repair damage Section

Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101013000
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 220C - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3E96DE4212587183E5E16BB2C79692A53C19875D
TransmissionMode: DDR&TX2
Original Imei: 35800203366520
Original Product code: 0548802
Bluetooth ID: 00BD3A48D828

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Battery voltage: 4406 mV, current: 251 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.


SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

When try to Rpair SD then Showing this


Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SUPERDONGLE_KEY ...error 0x0
Authenticating to SUPERDONGLE ...
Bad phones ack on step1, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request


When try to upate SP LOCK,Showing This

Quote:
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: xxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SIMLOCK ...OK

Reading Simlock info ...
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
  Reply With Quote
Old 01-22-2012, 06:24   #2 (permalink)
No Life Poster
 
.::Gsm_Srilanka::.'s Avatar
 
Join Date: Oct 2009
Location: srilanka
Age: 39
Posts: 1,519
Member: 1133072
Status: Offline
Thanks Meter: 505
u can repair this.u not have skills for this pls contact me with yahoo or sonork.

B,R-chamisrilanka
  Reply With Quote
Old 01-22-2012, 15:40   #3 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Exclamation Now
Quote:
Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Battery voltage: 4323 mV, current: 253 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed


SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

Super SD Show write Ok but still damage

Quote:
Using device: HTI, FW ver: 00.50, SN: 00005D9B
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SUPERDONGLE_KEY ...OK
Authenticating to SUPERDONGLE ...
SUPERDONGLE authorized !
Writing RFBB data: modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\def\rfbb\5310_RM-303.txt ...
Writing RF settings to phone ...OK, finished. 15 Records found.
Writing BB settings to phone ...OK, finished. 8 Records found.
Done.
Quote:
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Battery voltage: 4485 mV, current: 251 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed

Simlock update Showing this
Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SIMLOCK ...OK

Reading Simlock info ...
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

I wait for our respectable product Supporter obluez
  Reply With Quote
Old 01-22-2012, 15:45   #4 (permalink)
No Life Poster
 
net.tarik's Avatar
 
Join Date: Jun 2010
Location: Green Forest
Posts: 1,125
Member: 1316000
Status: Offline
Sonork: 100.1624093
Thanks Meter: 348
Tarikul post self test log


BR
  Reply With Quote
Old 01-22-2012, 15:45   #5 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Unhappy After Erase EEPROM
Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SIMLOCK ...OK

Reading Simlock info ...
Imei net: 358002033665203
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

BUT..........on check
Quote:
Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Battery voltage: 4490 mV, current: 252 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed

SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!
  Reply With Quote
Old 01-22-2012, 18:27   #6 (permalink)
No Life Poster
 
gbluez's Avatar
 
Join Date: Jul 2004
Posts: 11,049
Member: 73565
Status: Offline
Thanks Meter: 5,062
eeprom area seems to be stucked.

- backup rpl, dropdown choose RAP
- FULL ERASE - get addr, not mark safe erase
- Flash MCU only, lower version.
- Restore IMEI, Repair simlock, Repair SD.

if all done, flash the phone fully with higher version. - repair DCC is a must after this.
  Reply With Quote
Old 01-23-2012, 05:06   #7 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Arrow
Quote:
Originally Posted by net.tarik View Post
Tarikul post self test log


BR
Here Self test
@Obluez i try with erase , now try with your method.
Last edited by Tarikul Islam; 01-23-2012 at 05:16.
  Reply With Quote
Old 01-23-2012, 06:32   #8 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Question What is this?
Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 09.42 07-11-08 RM-303 (c) Nokia

Using cached productData.
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
PRIVATE ID: 746A1E1E7BF80CADA6D1BDD652770BC5BB205C07
Updating SIMLOCK ...OK

Reading Simlock info ...
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

Updating SIMLOCK ...OK but still corrupted!

Is any bug on this update?
  Reply With Quote
Old 01-23-2012, 11:00   #9 (permalink)
No Life Poster
 
.::ZUBER::.'s Avatar
 
Join Date: Apr 2006
Location: MXBOX THUNDER Helpdesk
Age: 50
Posts: 4,273
Member: 262425
Status: Offline
Sonork: 100.1617691
Thanks Meter: 1,264
Quote:
Originally Posted by Tarikul Islam View Post
Nokia 5310 not possible to repair damage Section


When try to Rpair SD then Showing this




When try to upate SP LOCK,Showing This
bro. dont repair sd only update superdongle, it will show corruptes & will repair automatically, now you can do the further job.....
  Reply With Quote
Old 01-27-2012, 05:33   #10 (permalink)
No Life Poster
 
Tarikul Islam's Avatar
 
Join Date: May 2010
Location: BaNgLaDeSh
Posts: 583
Member: 1310148
Status: Offline
Sonork: 100.1601928
Thanks Meter: 293
Talking See now
Quote:
Originally Posted by chamisrilanka View Post
u can repair this.u not have skills for this pls contact me with yahoo or sonork.

B,R-chamisrilanka
Quote:
Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Product code: 0547371
Battery voltage: 4314 mV, current: 254 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)
Camera config: XXXXXX, ver:

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 358002033665203
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

& Finally it done,only camera config damage.
Quote:
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101013000
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 088001018D0C8D56184C83C1DD085AA8A83C2A3F
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 220C - 0000 8921 [Samsung K8F1215ETM,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 1.40.0 revision: 0.0 size: 0x22C10
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3E96DE4212587183E5E16BB2C79692A53C19875D
TransmissionMode: DDR&TX2
Updating CMT CCC ...OK
Updating CMT HWC ...OK
Prog.status for Asic CMT ...
NOR: OK

Phone type: RM-303 (Nokia 5310 XpressMusic)
SW version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: 35800203366520-3
Product code: 0547371
Battery voltage: 4463 mV, current: 253 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)
Camera config: XXXXXX, ver:

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 358002033665203
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
  Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 10-14-2017 19:29
New Nokia Software!!!!!!! Jefferson Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 52 12-30-2016 08:17
Need software upgrade for Nokia 5110 ptkrf Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 30 02-24-2016 10:21

 



All times are GMT +1. The time now is 00:11.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.31360 seconds with 9 queries

SEO by vBSEO