E52 i cant flsh in mx key plz help ## (ANSWERED)
 

When i try to flas showing this error how can i solve

Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: HTIBUS, ver: 3.4.7.0 , NTMP ver: 2.6.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A200107196603447F1FF014E57FFA00A5744539
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT
Flash ID not supported for this loader (RAPUv11_algo_xsr16.fg)
Flash ID not supported for this loader (RAPUv11_algo_xsr16.fg)
Algorithm: RAPUv11_algo_xsr16.fg [XSR 1.6] version: 1.37.1 revision: 0.0 size: 0x2C610
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
Error sending loader: C00000
Total time for flashing process(boot+erase+write) was 2.343 s

Try to change loaders.

Hello,
so what is the phone condition?

If dead, check flash chip.


BR