E52 RM469 dead (ANSWERED)

[prime_master786]

i have e52.it is dead, when i received from customer, it vibrate only when pressing power button. i flashed it but now not powering on nor vibrating.......

here is log below:


Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Secondary boot loaded.
FlashID0: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: NOR,CMT
FlashID1: 0000 0001 - 0000 0000 [unused/removed] type: NOR,CMT
FlashID2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: MuxOneNAND,CMT
ALG [35]: XSR 1.6
Loading CMT update server data
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 10.22.0 revision: 3.0 size: 0xAC123
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1E3158CB
Verifying communication to device OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Rpl(Certificate) backup already exist (C:\mobileEx\3.4\data\backup\BB5_35378504582551_CE RT.rpl).
CMT PAPUBKEYS HASH: 85F252E351E225CAFC4DFBC8041EABD2823E3500
Storing certificate [NPC, CCC, HWC, R&D] OK.
Partitioning....
Partitioning complete
Erase size: 173.06 MB
CMT MuxOneNAND area [00020000-0003FFFF]
CMT MuxOneNAND area [00060000-004DFFFF]
CMT MuxOneNAND area [008E0000-0B13FFFF]
Formating partition ...
Flash programming ...
CMT PAPUBKEYS: 85F252E351E225CAFC4DFBC8041EABD2823E3500 (RAP Certificate 147 v.1) written.
Programming completed in 2 min 20.938 s
Processing PPM file: rm469_054.003_06.01_Euro3_prd.rofs2.fpsx
[BB5,XSR 1.6] size: 39.24 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 41.75 MB
CMT MuxOneNAND area [07340000-09CFFFFF]
Flash programming ...
Programming completed in 52.578 s
Processing PPM file: rm469_054.003_C00.01_DEFAULT_prd.rofs3.fpsx
[BB5,XSR 1.6] size: 7.55 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 20.25 MB
CMT MuxOneNAND area [09D00000-0B13FFFF]
Flash programming ...
Programming completed in 10.532 s
Processing CNT file: RM469_APE_ONLY_ENO_09wk23v0.087.fpsx
[BB5,XSR 1.6] size: 2.54 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 4.00 MB
CMT MuxOneNAND area [004E0000-008DFFFF]
Flash programming ...
Programming completed in 3.891 s
Processing CNT file: rm469_054.003_U006.000_prd.uda.fpsx
[BB5,XSR 1.6] size: 4.09 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Erase size: 65.25 MB
CMT MuxOneNAND area [0B140000-0F27FFFF]
Flash programming ...
Programming completed in 6.079 s
Total time for flashing process(boot+erase+write) was 5 min 26.156 s
Waiting for device boot up ...
Phone not found, retrying ...


how can i revive the phone? help me please

[zorgy_1979]

At first try to flash by fbus. Thinking you have problem with local mode. Open rpl backup file and see is this full rpl backup? Good solution to erase full flash and flash phone. But you will have rpl problem. If backup is full ok. Write it. If not buy rpl. Also you can try flash eno.

[gbluez]

hello,
please download our latest mxkey version.
after install, proceed with module update. there are two module updates: nokia and bcm cdma.

- Download here
- Nokia Module update read here