E60 Flash problem.
 

Log check by mxkey (interface JAF).

APE Data :
SYSTEM ASIC ID: 17100708
ASIC MODE ID: 00
PUBLIC ID: 9B9B6F1CFEBDB732FD91394F62E03F9FD7C64264
ROOT KEY HASH: 49A97E826B93BA20B7ED0B082475C00500000000
ROM ID: 1DFD66132C872FD4
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006000C192101002200
EM1 ASIC ID: 00000232
EM2 ASIC ID: 00000352
PUBLIC ID: 0D300113FF644E51E19955C11CAB7CCB2A9D3AC5
ASIC MODE ID: 00
ROOT KEY HASH: E9EFF4BFAA5393217CA6B17755FC3E14
ROM ID: F28A211FCEA7B19D
rap3gv2_2nd.fg: [BB5] version: 1.21.0 revision: 0.0 size: 0x3D00
Supported RAP Ids: 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200
FlashID0: 00EC 2250 - 0000 0121 [Samsung K8S6415ETB] type: NOR
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
ExtDEVC: FFFF 0000 - 0000 0000
RAP3Gv3_algo_fps8.fg: [BB5 ALGORITHM] version: 1.12.5 revision: 0.0 size: 0xFC00
Supported RAP Ids: 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS ID: 92B0376086877FA94BA540F3395BA500FF832607
helen3_2nd.fg: [BB5] version: 1.35.0 revision: 0.0 size: 0x3500
Supported APE Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
FlashID0: 00EC 00A1 - 0080 0015 [Samsung NAND K5E1G12ACM] type: NAND
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
h3_sam_nand_gbbm.fg: [OMAP1610 GBBM-1.8.1 ALG] version: 1.33.0 revision: 0.0 size: 0xA908
Supported APE Ids: 17100700, 17100701, 17100702, 17100703, 17100704, 17100708
Error reading PAPUBKEYS ID

p/s: Check by Jaf or MT box Ok.

RX2 set to enable



br,

RX2 enabled ===> the same. Why?

check cable


some cable not support RX2


br,

I use Universal cable. :(