E65 rm208 flashing problem

[highsoftware]

SIR PLZ CKEK LOG
Version from phone: 4.0615.2
Version from file: m128
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8009(15-04-2010), 1.0.0.12756(15-04-2010)
Rpl backup already exist (C:\mobileEx\3.3\data\backup\BB5_35863101348753_BA CK.rpl).
Processing file: rm208_m128_h20_ka_prod_306336900_c00_combined.bin as MCU
[BB5,BB5 ALGORITHM,BB5,OMAP1710 UNISTORE-II-1.2.1 ALG] size: 41.57 MB
Supported RAP Ids: 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0103192101003000, 010C192101003000, 010C192101013000
Supported APE Ids: 17100708
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101003000 [RAP3G ver: PA 3.0]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 18B0010A7A8C02542D3A58853A8E522C817925E2
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 00EC 22E8 - 0000 6921 [Samsung K8S2815ETB,128 Mbits] type: NOR,RAP
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS HASH: 0266638E9C2164FC6B5194ED596A6A251C699896
Storing certificate ...OK
Partitioning ...OK
Erase size: 67.28 MB
CMT NOR area [001E0000-00708205] erased in 27.890 s
CMT NOR area [00000000-0001FFFF] erased in 0.578 s
CMT NOR area [00080000-0009FFFF] erased in 0.578 s
CMT NOR area [000C0000-000DFFFF] erased in 0.985 s
CMT NOR area [00880000-0089FFFF] erased in 0.547 s
CMT NOR area [00F00000-00FDFFFF] erased in 5.562 s
APE NAND area [00000000-0007FFFF] erased in 0.235 s
warning : erase sector address out of chip bound.
APE NAND area [00080000-000803FF] erased in 0.297 s
warning : erase sector address out of chip bound.
APE NAND area [000C0000-03CFFFFF] erased in 0.265 s
warning : erase sector address out of chip bound.
Flash programming ...
CMT PAPUBKEYS: 0266638E9C2164FC6B5194ED596A6A251C699896 (RAP Certificate 56 v1) written.
Error chk C7012D0100D0000010000000F1
Error while programming [01] at 0x00000000, Result: 0010
Flashing terminated with error(s) in 1 min 34.516 s
RX Buffer: C7012D0100D0000010000000F172
I CHANGE CABLE BUT SAME PROBLEM

[shashankmobile]

which cable you are using 5 pins or 7 pins......
or you have tried with usb cable.....






Br.
Shashank

[kaleem munir]

use good quality cable or try usb cable

[highsoftware]

i use tested cable same model but same i try top usb but not success occure error usb divece not regnized