err in mx key (ANSWERED)

[ali_imran]

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
Rpl backup already exist (C:\mobileEx\3.4\data\backup\35932803144863_BACK.r pl).
Processing MCU file: rh122_005.010
[DCT4,DCT4 ALGORITHM] size: 2.37 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 88C0 [ST M58MWR064FU,64 Mbits] page size: 64 K type: NOR area: 01000000-017FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00696856:2984DA60
Area [01000000-0100FFFF] erased in 0.828 s
Area [01010000-0179FFFF] erased in 1 min 35.422 s
Area [017A0000-017EFFFF] erased in 4.266 s
Area [01F00000-01FDFFFF] erased in 0.406 s
Flash programming ...
Programming completed in 19.968 s
File Processed in 2 min 12.422 s
Processing CNT file: rh1220_nai05.01ag
[DCT4,DCT4 ALGORITHM] size: 175.88 KB
Supported Ids: 2293
Boot error: 02 FF FF 72
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
RX Buffer: 0000000000F172

set is ok but when i flash show always err in all sets

[gbluez]

- do module update click here
- repeat operation.

BR