got phone in this condition (ANSWERED)

[rroach59]

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: xujnjjkok
Using device: USB ROM and HTI, FW ver: 00.50, SN: 0000856F
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.20766(30-03-2012), Library ver: 1.0.0.14016(30-03-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35929204423363
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35929204423363_ back.RPL)
Processing file: rm692__07.48.mcusw
Downloading item CODE:rm692__07.48.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.485 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 37.282 s
Checksum verified (0x4BBF)
Processing file: rm692__07.48.ppm_c
Downloading item CUSTackage_c.ppm_ebl_psi.fls, num block: 1, size: 4.42 MB
Erasing area 0x41DC0000-0x42229FFE ...OK
Programming completed in 5.921 s
Checksum verified (0x7005)
Processing file: rm692__07.48.image_c_059D3B7
Downloading item CUSTackage_c_059D3B7.image.fls, num block: 1, size: 12.38 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 16.203 s
Checksum verified (0x711F)
Total time for flashing process(boot+erase+write) was 3 min 49.454 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-02 USB Phonet, PORT_ID: 7DED3E3
Verifying communication to device OK.



Phone type: RM-692 (C2-02)
SW version: V 07.48 23-02-12 RM-692 (c) Nokia
Imei plain: 35929204423363-3
Product code: 059K3S9
Language Pack:
- not available.

SIMLOCK_DATA corrupted!

[Engiess]

What is the problem of the before flash and after flash

[rroach59]

SIMLOCK_DATA corrupted!

[gbluez]

Well if you don't have any backup, your phone is bricked.