FOR MR. MANOLE & OTHER MEMBER..Pls. Read.. - GSM-Forum

amit123 · 02-11-2010, 19:02

Resepcted Mr. Manole,

Thanks for your wonderful job in the GSM WORLD. Actually you are rocking this world. Another thing I wish to express that you are really a very broad minded person otherwise you could do business like RASKAL etc. where and to whom money matters most.

But sir, pls. solve your bugs specially in the DCT-4 sets where most of the times, it tells that "No bootloader is found for this RAP ID...", I think the bug is in the programming where the phone will go to the LOCAL MODE getting the BYTES freely flown among CPU, FLASH AND RAM IC. The software cann't read the data stored in the FLASH ID.

Please look into the matter on urgent basis.

To me UFS-3+HWK is the best box to detect and pass the checking procedure.

I request the other members of this forum to pls. go through my posting and let me know whether my explanation is technically correct or not ?

Thanking you.

Regards,

amit123

amit123 · 02-11-2010, 19:16

Go through pls and give your opinion.

Regards,

amit123

rana-kaka · 02-11-2010, 20:20

Bro You are 100% right. Bugs are not fixed in new update also specially for DCT4. Mostly UFS/HWK is using and MX Key is not working completly specially in boot loader. I agree your opinion

VIBINDAS_INDIA · 02-11-2010, 20:35

yes i agree with you...

taieeb · 02-11-2010, 20:38

yes i also agree with you all

albert maren · 02-11-2010, 20:44

yes for that it is true i cant use my mx-key to flash phones again it always kill the so i only use it to unlock and hwk to flash
so plz mr manole try to do something about it fast.

gprsman · 02-11-2010, 20:46

I agree after three updates have not been able to fix the flash? first you have to think to solve the most important problem that the flash

hwk no problems with flash / downgrade.

amit123 · 02-13-2010, 14:01

Hello Members,

Please share your thought about the bugs of MX-KEY.....

Press THANKS if you think this thread is sticky enough!

Regards,

amit123

xahin · 02-13-2010, 14:15

BUT I AM WORKING VERY WELL UFS With MXKEY. I have UFS MICRO_With original HWK.This is not able to Buscheck/Flash with MX.But when I Use UFS-8_Clone (removed_HWK) Its Works very Well.I just say UFS_without Hwk is Working Flash/Imei Repair Ok. anybody Check this.

gprsman · 02-13-2010, 14:16

always bug in bb5 with HWK NOOOOOOOOO PROBLEM!

Version from phone: 35.0.001
Version from file: 35.0.001
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010)
Rpl backup already exist (C:\mobileEx\3.3\data\backup\BB5_35684202625097_BA CK.rpl).
Processing file: RM-320_35.0.001_PR.C0R as MCU
[BB5,XSR 1.5,BB5,OMAP2420 UNISTORE-II-1.5.1 ALG] size: 69.48 MB
Supported RAP Ids: 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103
Supported APE Ids: 24200705
APE Data :
SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2]
ASIC MODE ID: 00
PUBLIC ID: 2D24AE18B2C86EF863659040B123D454C11CD8D6
ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 15500109F6740052DAD68A026D4C4299A58C77DE
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,RAP
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
ExtDEVC: FFFF 0000 - 0000 0000
Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
RAP PAPUBKEYS HASH: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4
SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00
Supported APE Ids: 24200703, 24200704, 24200705, 24200706
Flashing terminated with error(s) in 15.890 s
RX Buffer: 0400000000B172

Umair Rashid · 02-13-2010, 14:19

@gprsman

Dct4 Flashing bug has been eradicated in the MXKEY v3.3 revision 1.6 .
Every thing should work Fine. Check and report.
And BTW there is no need of Sticky thread like that

Br,
Umair

didin yulian · 02-13-2010, 14:20

take al00k this sir....
http://forum.gsmhosting.com/vbb/showthread.php?t=836208

gprsman · 02-13-2010, 14:24

Quote:

Originally Posted by Umair Rashid

@gprsman

Dct4 Flashing bug has been eradicated in the MXKEY v3.3 revision 1.6 .
Every thing should work Fine. Check and report.
And BTW there is no need of Sticky thread like that

Br,
Umair

HI Umair Rashid,
after 7 realeae always bugs in bb5 flashing i use fbus cable pro by gpg with hwk no problem.

BR.

Umair Rashid · 02-13-2010, 14:30

Quote:

Originally Posted by gprsman

HI Umair Rashid,
after 7 realeae always bugs in bb5 flashing i use fbus cable pro by gpg with hwk no problem.

BR.

For that i awlays recommend to USE
-Latest EXE 3.3 rev1.6 or higher for Unlocking purposes
-Old EXE 3.2 rev 5.4 for Flashing purpose.

both could be installed on Single PC .

Br,
Umair

**Brka** · 02-13-2010, 16:23

Quote:

Originally Posted by Umair Rashid

For that i awlays recommend to USE
-Latest EXE 3.3 rev1.6 or higher for Unlocking purposes
-Old EXE 3.2 rev 5.4 for Flashing purpose.

both could be installed on Single PC .

Br,
Umair

or .... under settings,,
interface speed = normal
interface speed = slow

can be helpful on some pc's .

b.r.
Alex

02-11-2010, 19:02	#1 (permalink)
amit123 Freak Poster Join Date: Jan 2005 Location: KOLKATA Age: 51 Posts: 451 Member: 102582 Status: Offline Thanks Meter: 72	FOR MR. MANOLE & OTHER MEMBER..Pls. Read.. Resepcted Mr. Manole, Thanks for your wonderful job in the GSM WORLD. Actually you are rocking this world. Another thing I wish to express that you are really a very broad minded person otherwise you could do business like RASKAL etc. where and to whom money matters most. But sir, pls. solve your bugs specially in the DCT-4 sets where most of the times, it tells that "No bootloader is found for this RAP ID...", I think the bug is in the programming where the phone will go to the LOCAL MODE getting the BYTES freely flown among CPU, FLASH AND RAM IC. The software cann't read the data stored in the FLASH ID. Please look into the matter on urgent basis. To me UFS-3+HWK is the best box to detect and pass the checking procedure. I request the other members of this forum to pls. go through my posting and let me know whether my explanation is technically correct or not ? Thanking you. Regards, amit123

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mr.Manole & Alim Hape Plase Fix some Problem	sayhu	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	0	03-20-2010 20:02
Atention To Any Member Pls Read This	Formingus	Off Topic Zone	0	12-18-2007 11:35
@Mr doggyfrrstart & all member plezzz help	mbarek_oussema	Various	1	05-12-2007 15:10
to all members, pls read then answer	gsm-lord	Off Topic Zone	195	04-12-2004 23:12
Nokai 8210 & 8850 PRPBLEM PLS READ & HELP	Henry	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	11-15-2001 21:20

02-11-2010, 19:16	#2 (permalink)
amit123 Freak Poster Join Date: Jan 2005 Location: KOLKATA Age: 51 Posts: 451 Member: 102582 Status: Offline Thanks Meter: 72	Go through pls and give your opinion. Regards, amit123

02-11-2010, 20:20	#3 (permalink)
rana-kaka Junior Member Join Date: May 2008 Posts: 29 Member: 777670 Status: Offline Thanks Meter: 5	Bro You are 100% right. Bugs are not fixed in new update also specially for DCT4. Mostly UFS/HWK is using and MX Key is not working completly specially in boot loader. I agree your opinion

02-11-2010, 20:35	#4 (permalink)
VIBINDAS_INDIA No Life Poster Join Date: Feb 2008 Location: Inside of GsmhostinG Posts: 1,008 Member: 707582 Status: Offline Sonork: 100.1620432 Thanks Meter: 334	yes i agree with you...

02-11-2010, 20:38	#5 (permalink)
taieeb No Life Poster Join Date: May 2008 Location: shimoga Age: 40 Posts: 596 Member: 781262 Status: Offline Thanks Meter: 90	yes i also agree with you all

02-11-2010, 20:44	#6 (permalink)
albert maren Registered User Join Date: Sep 2005 Location: Abuja nigeria Posts: 1,120 Member: 185010 Status: Offline Sonork: alias-albertino Thanks Meter: 170	yes for that it is true i cant use my mx-key to flash phones again it always kill the so i only use it to unlock and hwk to flash so plz mr manole try to do something about it fast.

02-11-2010, 20:46	#7 (permalink)
gprsman No Life Poster Join Date: Jan 2006 Location: HWKBOX,MX-KEY,CYCLONE SL3 ;-) Posts: 1,273 Member: 217461 Status: Offline Thanks Meter: 150	I agree after three updates have not been able to fix the flash? first you have to think to solve the most important problem that the flash hwk no problems with flash / downgrade.

02-13-2010, 14:01	#8 (permalink)
amit123 Freak Poster Join Date: Jan 2005 Location: KOLKATA Age: 51 Posts: 451 Member: 102582 Status: Offline Thanks Meter: 72	Hello Members, Please share your thought about the bugs of MX-KEY..... Press THANKS if you think this thread is sticky enough! Regards, amit123

02-13-2010, 14:15	#9 (permalink)
xahin Freak Poster Join Date: Jun 2007 Location: OUT OF CONTROL Posts: 276 Member: 536012 Status: Offline Sonork: 100.1660617 Thanks Meter: 120	BUT I AM WORKING VERY WELL UFS With MXKEY. I have UFS MICRO_With original HWK.This is not able to Buscheck/Flash with MX.But when I Use UFS-8_Clone (removed_HWK) Its Works very Well.I just say UFS_without Hwk is Working Flash/Imei Repair Ok. anybody Check this.

02-13-2010, 14:16	#10 (permalink)
gprsman No Life Poster Join Date: Jan 2006 Location: HWKBOX,MX-KEY,CYCLONE SL3 ;-) Posts: 1,273 Member: 217461 Status: Offline Thanks Meter: 150	always bug in bb5 with HWK NOOOOOOOOO PROBLEM! Version from phone: 35.0.001 Version from file: 35.0.001 Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010) Rpl backup already exist (C:\mobileEx\3.3\data\backup\BB5_35684202625097_BA CK.rpl). Processing file: RM-320_35.0.001_PR.C0R as MCU [BB5,XSR 1.5,BB5,OMAP2420 UNISTORE-II-1.5.1 ALG] size: 69.48 MB Supported RAP Ids: 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103 Supported APE Ids: 24200705 APE Data : SYSTEM ASIC ID: 24200705 [OMAP2420 ver: 2.2] ASIC MODE ID: 00 PUBLIC ID: 2D24AE18B2C86EF863659040B123D454C11CD8D6 ROOT KEY HASH: BA8710A7E1CD5A2909B9A875DB27AA2400000000 RAP Data : SYSTEM ASIC ID: 000000010000022600010006400C192101031103 [RAPIDO3G ver: 1.13] EM0 ID: 00000295 EM1 ID: 00000B22 PUBLIC ID: 15500109F6740052DAD68A026D4C4299A58C77DE ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: 4B9B75103E691FF8 SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80 Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105 FlashID0: 0001 0035 - 0000 6921 [AMD S29NS128N,128 Mbits] type: NOR,RAP ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000 ExtDEVC: FFFF 0000 - 0000 0000 Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520 Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105 RAP PAPUBKEYS HASH: 9C5EA53A1F6DBD7DF955715E780159991B4B6EA4 SecondaryBoot: omap2420_m1_2nd.fg [BB5] version: 1.41.0 revision: 0.0 size: 0x7C00 Supported APE Ids: 24200703, 24200704, 24200705, 24200706 Flashing terminated with error(s) in 15.890 s RX Buffer: 0400000000B172

02-13-2010, 14:19	#11 (permalink)
Umair Rashid No Life Poster Join Date: Dec 2006 Location: Rawalpindi, Pakistan Posts: 2,292 Member: 421117 Status: Offline Sonork: +92 346 5544377 (PHONE) Thanks Meter: 2,522	@gprsman Dct4 Flashing bug has been eradicated in the MXKEY v3.3 revision 1.6 . Every thing should work Fine. Check and report. And BTW there is no need of Sticky thread like that Br, Umair

02-13-2010, 14:20	#12 (permalink)
didin yulian No Life Poster Join Date: Mar 2006 Location: skyw0rk jombang Posts: 651 Member: 239081 Status: Offline Thanks Meter: 253	take al00k this sir.... http://forum.gsmhosting.com/vbb/showthread.php?t=836208