2626 could not be flashed... - GSM-Forum

dapinderjit · 03-03-2010, 05:02

got one 2626 with unknown chip @ flash ic
i just reflowed the ic and its done
now the phone is okay with hwk
but still dead
could get flashed...
what could be done...

here's the log :

1st Boot: Ok, DCT4, UPP: 3040 [Rm-291] [2.0.9.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x01FFFFFF,00208804,St M36L0R7040U
Algorithm: u3_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 84BC891849257953CA4FD4188C
Decoded MSID: 4F16BAE9-0093EE36-A8000000
Encoded FAID: 0A37130F-93EEC887-D8381A14
IMAGE: rm291__06.80.mcusw
Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01
Area2: 0x01020000-0x018DFFFF Erased, Time: 01:28
Area3: 0x01EE0000-0x01FDFFFF Erased, Time: 00:10
MCU Flashing Completed, Time: 00:51
Chip SECTOR_SIZE: 128k, File FAT_SECTOR_SIZE: 64k
Warning, Must be Used 128Kb Sector_Size CNT File
IMAGE: rm291__06.80.image_eh_128
Area1: 0x01B80000-0x01EDFFFF Erased, Time: 00:34
CNT Flashing Completed, Time: 00:11
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

lilong_lee · 03-03-2010, 05:32

this is mx key team brother not hwk if you fixed that used mx key by alime hape

dapinderjit · 03-03-2010, 12:24

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010)
ASIC ID: 0x3040 [UPP_4M ver: 4.1]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8804 [ST 58LR128U,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: 8048 1008 0320 0322 4D10 08A4 5008 4504
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0093EE36

A3BDA66
ASIC type: 11
UEM Imei: 35933502806417

Phone not responding !

dapinderjit · 03-04-2010, 06:26

not done with mx key too bro
some here
who could help me up
?
'\

03-03-2010, 05:02	#1 (permalink)
dapinderjit No Life Poster Join Date: May 2005 Location: India Age: 37 Posts: 1,567 Member: 145082 Status: Offline Thanks Meter: 798	2626 could not be flashed... got one 2626 with unknown chip @ flash ic i just reflowed the ic and its done now the phone is okay with hwk but still dead could get flashed... what could be done... here's the log : 1st Boot: Ok, DCT4, UPP: 3040 [Rm-291] [2.0.9.0] 2nd Boot: u3_2nd.fia, Ver: 4.79.0 Fl0: 0x01000000-0x01FFFFFF,00208804,St M36L0R7040U Algorithm: u3_intel.fia, Ver: 4.80.0 Algorithm Ok, MSID: 84BC891849257953CA4FD4188C Decoded MSID: 4F16BAE9-0093EE36-A8000000 Encoded FAID: 0A37130F-93EEC887-D8381A14 IMAGE: rm291__06.80.mcusw Area1: 0x01000000-0x0101FFFF Erased, Time: 00:01 Area2: 0x01020000-0x018DFFFF Erased, Time: 01:28 Area3: 0x01EE0000-0x01FDFFFF Erased, Time: 00:10 MCU Flashing Completed, Time: 00:51 Chip SECTOR_SIZE: 128k, File FAT_SECTOR_SIZE: 64k Warning, Must be Used 128Kb Sector_Size CNT File IMAGE: rm291__06.80.image_eh_128 Area1: 0x01B80000-0x01EDFFFF Erased, Time: 00:34 CNT Flashing Completed, Time: 00:11 Extracting Contents Package ... Init Local Mode Failed Contents Package Extracting Failed: Process Failed, Repowering Mobile

03-03-2010, 12:24	#3 (permalink)
dapinderjit No Life Poster Join Date: May 2005 Location: India Age: 37 Posts: 1,567 Member: 145082 Status: Offline Thanks Meter: 798	Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010) ASIC ID: 0x3040 [UPP_4M ver: 4.1] SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168 FlashID0: 0020 8804 [ST 58LR128U,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF FlashID1: 0000 0001 [unused/removed] ExtBUSC: 8048 1008 0320 0322 4D10 08A4 5008 4504 Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168 Performing Flash Authentication ...OK UEM ID: 0093EE36A3BDA66 ASIC type: 11 UEM Imei: 35933502806417 Phone not responding !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iphone could not be restored because the firmware file is not compatible?any solution	shahinur	iPhone 2 / iPhone 3G / iPhone 3GS	2	03-16-2010 16:15
K850 could not be flashed please help me up !!!	dapinderjit	Sony Ericsson	0	02-08-2010 04:25
hardlock could not be found	hazarhakan	ThunderStorm Box	2	12-05-2006 15:13
Again, C6V could not be unlocked w/o opening..	Bi0H4z4rD	DreamBox	4	02-03-2006 12:59
PC Suite - Phone Browser Error: "Operation Could Not Be Completed"	Tatunkhamon	Nokia Multimedia	1	02-02-2005 04:59

03-03-2010, 05:32	#2 (permalink)
lilong_lee No Life Poster Join Date: Jul 2009 Location: philippines now here in U.A.E Age: 38 Posts: 2,852 Member: 1070665 Status: Offline Sonork: 100.1636802 Thanks Meter: 572	this is mx key team brother not hwk if you fixed that used mx key by alime hape

03-04-2010, 06:26	#4 (permalink)
dapinderjit No Life Poster Join Date: May 2005 Location: India Age: 37 Posts: 1,567 Member: 145082 Status: Offline Thanks Meter: 798	not done with mx key too bro some here who could help me up ? '\