mxbox not dcted or not upgrade

[shaheb_anl]

same here .... my box is not detecting by pc...I have noticed that some time red light blinks al little bit.. i have done nothing with box , yesterday iit was working perfect... and today when i need to flash a mobile i connect it and it was not working waht shoul i do??? plz help here , my mox new . me purched only two days ago , me try another 3 pc . but same problem . when me try upgrade show this error

Initializing HTI ...
HTI initialized.
Boot Version: 7
Serial: ******
Connecting to server:
ERROR: Connect failed (connect()): Error 0
ERROR: Receive buff error no: 0x00
ERROR: Function name: HID_UPD_WriteApplication Error number: 04


plz help me .

[shaheb_anl]

Originally Posted by aayushjaiswal

u use latest version bro.

yes borther this latest veron .

[.::GSMDREAM::.]

its ur cable problem bro.use motherboard usb port not use hub..............

[HBHAVNA]

Originally Posted by shaheb_anl

same here .... My box is not detecting by pc...i have noticed that some time red light blinks al little bit.. I have done nothing with box , yesterday iit was working perfect... And today when i need to flash a mobile i connect it and it was not working waht shoul i do??? Plz help here , my mox new . Me purched only two days ago , me try another 3 pc . But same problem . When me try upgrade show this error

initializing hti ...
Hti initialized.
Boot version: 7
serial: ******
connecting to server:
Error: Connect failed (connect()): Error 0
error: Receive buff error no: 0x00
error: Function name: Hid_upd_writeapplication error number: 04


plz help me .

just use old mx key and insert your card to in and start mobile ex software then click update hti then connect your mx box via usb your box update complatly in new 0.24 firmware tested many time and success 100000% try and pm. Me here

[yogyaphone]

Originally Posted by shaheb_anl

same here .... my box is not detecting by pc...I have noticed that some time red light blinks al little bit.. i have done nothing with box , yesterday iit was working perfect... and today when i need to flash a mobile i connect it and it was not working waht shoul i do??? plz help here , my mox new . me purched only two days ago , me try another 3 pc . but same problem . when me try upgrade show this error

Initializing HTI ...
HTI initialized.
Boot Version: 7
Serial: ******
Connecting to server:
ERROR: Connect failed (connect()): Error 0
ERROR: Receive buff error no: 0x00
ERROR: Function name: HID_UPD_WriteApplication Error number: 04


plz help me .

Use mobileEx 3.5 software to update firmware HTI. It can run though smartcard unread.

[shaheb_anl]

Originally Posted by HBHAVNA

just use old mx key and insert your card to in and start mobile ex software then click update hti then connect your mx box via usb your box update complatly in new 0.24 firmware tested many time and success 100000% try and pm. Me here

me try but same .......................

[shaheb_anl]

Originally Posted by .::GSMDREAM::.

its ur cable problem bro.use motherboard usb port not use hub..............

same problem bro.................

[shaheb_anl]

Originally Posted by aayushjaiswal

u just all mobileEX UNINSTALL FULLY,OR DELET LOCAL MATCHINE SOFTWARE THEN INSTALL AFTER UPDATE HTI

me try but same . me all ready renistall xp but same

[HBHAVNA]

Originally Posted by shaheb_anl

me try but same .......................

first u have to tell me your box still dead or alive? If box dead then start this produce again

1. U have to need mx key card reader,(old mx key) put your mx box card in to mx key card reader,
2. Open mobile ex 3.5 rev 1.4 software then click update hti, now he ask for mx box, put your box into pc via usb, and now your box is 100000000000% update with new firmware 0.24, its tested solution bro its working any mx box , other wise check your usb cable and u r usb port try new usb port and cable. Its working

[shaheb_anl]

[email protected]

[gbluez]

Hi,
HTIUpdate.exe is intended for box recovery, with single server selection.

please use mobileEx.exe instead of HTIUpdate.exe.
it is auto select those 4 servers, will choose the best location that you can reach.


ps.
use only latest version (3.5rev1.4)

BR

[shaheb_anl]

Originally Posted by gbluez

Hi,
HTIUpdate.exe is intended for box recovery, with single server selection.

please use mobileEx.exe instead of HTIUpdate.exe.
it is auto select those 4 servers, will choose the best location that you can reach.


ps.
use only latest version (3.5rev1.4)

BR

brother me try but same problem . me try another 3 pc but same problem

[shaheb_anl]

Originally Posted by HBHAVNA

first u have to tell me your box still dead or alive? If box dead then start this produce again

1. U have to need mx key card reader,(old mx key) put your mx box card in to mx key card reader,
2. Open mobile ex 3.5 rev 1.4 software then click update hti, now he ask for mx box, put your box into pc via usb, and now your box is 100000000000% update with new firmware 0.24, its tested solution bro its working any mx box , other wise check your usb cable and u r usb port try new usb port and cable. Its working

brother 3.5 rev 1.4 veron not mxkey or mxboxx dected. but 3.5 rev 1.3 mxkey dected . not mxboxx dected .