MXKEY / MXBOX v3.5 revision 1.8 Public Discussion Thread

[MANOLE]

BUY GEVEY SIM for Unlock Iphone 4S 5.0.1


GEVEY SIM (ALL IN ONE)
for unlock IPHONE 4S 5.0.1
CRAZY UPDATES

http://forum.gsmhosting.com/vbb/f681...-done-1432173/

http://forum.gsmhosting.com/vbb/f681...-menu-1434119/

http://forum.gsmhosting.com/vbb/f681...112-a-1436449/






BUY HTI PLUS (MXBOX ORANGE)
with PayPal and free delivery WirldWide


v3.5 revision 1.8, Public-Release


What is new:

Nokia Tool

- added: support for Windows Phone 7 platform
allow normal flashing (Refurbish) and dead mode flashing(Recovery)
for recovery please select "Nokia DLOAD (Recovery) in connection list
( the drivers located to "data\drivers\nokia\wp" )

- added: esco file handling

- bugfix: FBUS protocol bug with Symbian Belle

- updated sl3bf to version 3.7
added: support for oclHashcat-lite-0.09
minor bug fixed + improvements

- added: HTI OTP ID displayed on connect

- added: flash update version "11.48.000.1"

- bugfix: Rapido Usb "FUR Cold Boot" bug

- bugfix: BB5 Usb FUR control bug

- bugfix: Write local RFBB definitions(*.pm) bug


BlackBerry Tool

- added: unlock by PRD function
allow to select PRD instead of MEP for unlock calc
(usefull for MEP-LOADED or hidden MEP)

- minor bugfix


Added to setup HTI Misc Tool (htic.exe)
for now, it has features:

- Imei analyst: Used to analysis IMEI/TAC number

- iPhone/iPad Serial number analysis




LINK FOR DOWNLOAD

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe

mobileEx_setup_v3.5_rev1.8(20120301).exe







BR,
Manole
GSM: +8613077861111
ICQ: 66-11-11
YM: manole4000
QQ: 2590331709
MSN: [email protected]
SONORK: 100.88888
Web Page: ASCOGSM

[irfaN_vu]

well i try and come back with result soon

[mscomp]

when you sloved boot DCT4 with HTI cant boot dtc4
i just flash bb5 and xgld fone only

[ammar]

During installation avast reported that fire.exe is malware.
Regards

[NWJ]

getting this :
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !


what to do?

[webatomico]

"FUR Cold Boot" bug fixed, everything is working good so far, nice update

[CHAUDHRAY ARSHAD]

Originally Posted by webatomico

"FUR Cold Boot" bug fixed, everything is working good so far, nice update

lol sme phone work fine bt sme them thimg got errore whn usb flash

[pauler man]

great work...but more things to update to make us user satisfy more..

[^^^JUMPER^^^]

This is really crazy update actually i did update gevey to 9 no dial 112 , works perfect
also now in BB PRD added .

JUMPER

[shailccna]

allow normal flashing (Refurbish) and dead mode flashing(Recovery)
for recovery please select "Nokia DLOAD (Recovery) in connection list
( the drivers located to "data\drivers\nokia\wp" repected plz clear this i can not under stand

[gbluez]

Originally Posted by NWJ

getting this :
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !


what to do?

- use HTI without any USB HUB. plug to rear PC Port. Update your USB HOST chipset driver.
If you are still got the same message, you can ignore this message.
you will work better if you upgrade your usb port.

Originally Posted by webatomico

"FUR Cold Boot" bug fixed, everything is working good so far, nice update

RAPIDO USB bug has been eliminated.

Originally Posted by shailccna

allow normal flashing (Refurbish) and dead mode flashing(Recovery)
for recovery please select "Nokia DLOAD (Recovery) in connection list
( the drivers located to "data\drivers\nokia\wp" repected plz clear this i can not under stand

Normal mode: connect phone in alive mode. choose attached WP device as interface.
Dead Mode: This is just like if you choose Nokia USB ROM, but WP device uses DLOAD interface for dead mode.

!! NOKIA USB ROM AS INTERFACE IS NOT FOR WP BASED !!

[ajaystarin]

same here, mxbox orange already connected via direct usb cable not hub & i am still getting following error. How to rectify it

Using device: HTI PLUS Flasher Interface
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: 1B080E01CA095053E5134A4C040000F5
Boot ver: 01.09, Box SN: -------
FW version: 00.50
HTI PLUS Flasher Interface ready.

[mrnazam]

Originally Posted by gbluez

- use HTI without any USB HUB. plug to rear PC Port. Update your USB HOST chipset driver.
If you are still got the same message, you can ignore this message.
you will work better if you upgrade your usb port.

Using device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: 02FE1111A00C4E5304BE634B030000F5
Boot ver: 00.07, Box SN: 00006C**
FW version: 00.50
HTI Flasher Interface (WinUSB) ready.


i use without any HUB

[gbluez]

Originally Posted by mrnazam

Using device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
WARNING: Device drivers might not work properly !
[err0] required OHCI(1.1)/EHCI(2.0)/xHCI(3.0) controller !
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: 02FE1111A00C4E5304BE634B030000F5
Boot ver: 00.07, Box SN: 00006C**
FW version: 00.50
HTI Flasher Interface (WinUSB) ready.


i use without any HUB

If you are still got the same message, you can ignore this message.
you will work better if you upgrade your usb port.

Additional knowledge: USB HOST CONTROLLER

[mduncan]

added: unlock by PRD function
allow to select PRD instead of MEP for unlock calc
(usefull for MEP-LOADED or hidden MEP) update nice