n73 start up failed (ANSWERED)
 

dear team I never had such a situation.info is ok here is log

SW Version: V 05wk47v61.1 09-07-08 RM-133 (c) Nokia.
Imei plain: -
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 357688888888888
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
but the phone can not start up
please help me I tried erase and full pm sx4 superdongle key ,but the same ?

try to formate with *,3, sednd button and power key or formate with hwk or jaf file system formate. post result

hello,
please run self test and paste here.

BR

i had this problem and i solved it with atf box and using latest version of flash file

Selftests to proceed: 28
Passed ST_TAHVOINT_TEST
Passed ST_UEM_CBUS_IF_TEST
Failed ST_EAR_DATA_LOOP_TEST
Failed ST_SIM_CLK_LOOP_TEST
Failed ST_SIM_IO_CTRL_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_BACKUP_BATT_TEST
Passed ST_CMT_APE_WAKEUP_TEST
Passed ST_SLEEPCLK_FREQ_TEST
Failed ST_RADIO_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_VIBRA_TEST
Passed ST_MBUS_RX_TX_LOOP_TEST
Passed ST_EXT_DEVICE_TEST
Passed ST_IR_LOOP_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LPRF_IF_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_CAMERA_ACCELERATOR_TEST
Passed ST_SEC_CAMERA_IF_TEST
Passed ST_CAMERA_AUTOFOCUS_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_MAIN_LCD_IF_TEST
Passed ST_BT_WAKEUP_TEST
Selftests done, Tests total: 28, Tests passed: 24, Tests not passed: 4

hi,
it's hardware problem. please change power asic - avilma.

BR