Nokia 101 Checksum mismatch

[~The JoKeR~]

Hi,
I flash Nokia 101 but it show checksum mismatch,
here is log,

MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: xxxxxxx
Using device: HTI, FW ver: 00.50, SN: xxxxxxxx
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 2404 - 23280002 [Samsung K5N2833ATM,128 Mbits]
CFI information:
Flash settings: 0/1, size: 0x01000000
2 Block regions:
255 x 0x00010000 = 0x00FF0000
8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rm769_006.650
Downloading item CODE:hw_f3_rm769_r06.650.fls, num block: 3, size: 5.58 MB
Erasing area 0x00000000-0x00005FFE ...OK
Programming completed in 0.593 s
Erasing area 0x00800000-0x00BEFFFE ...OK
Programming completed in 1 min 18.391 s
Erasing area 0x00C5D000-0x00DFB6FE ...OK
Programming completed in 32.922 s
Checksum mismatch: Phone calculated 0x413E, software calculated 0x5824
Processing file: rm769_006.65ij
Downloading item CUST:hw_f3_rm769_006.65ij.fls, num block: 1, size: 4.78 MB
Erasing area 0x00100000-0x005C677E ...OK
Programming completed in 1 min 35.234 s
Checksum mismatch: Phone calculated 0x1F7B, software calculated 0x7F35
Processing file: rm7690_nai06.65ij
Downloading item CUST:hw_f3_rm7690_nai06.65ij.fls, num block: 1, size: 715.70 KB
Erasing area 0x00E60000-0x00F121BE ...OK
Programming completed in 13.844 s
Checksum mismatch: Phone calculated 0x97A4, software calculated 0xFE3D
Total time for flashing process(boot+erase+write) was 5 min 49.156 s

What is this problem,
any solution???

[.::ZUBER::.]

Bro. Use same Product Firmware of your Phone, if it's same then Re-Download Firmware again & Flash, post result.

BR,

[~The JoKeR~]

I flash it with same product code but problem not solved...

[.::ZUBER::.]

Bro. I think you must Re-Download Firmware & Flash, may be yours previous Firmware incomplete. No idea more than that.

BR,

[~The JoKeR~]

I download flash files by fire agent,
so, what doubt in them that they are corrupted...

[.::ZUBER::.]

Bro. I think so this is only the reason for your error. Better Re-Download Firmware & delete previous, flash it & post result, may be Positive.

BR,

[~The JoKeR~]

I re-download but problem still same...........

[smorbe]

re-heat flash chip is your last resort.