Nokia 1661 flashing error>>>> (ANSWERED)

[hermanpatel_14]

dear friend, i have nokia 1661 which was water damage , i cleaned the fone alma and fone didn't turn on . so i try to flash with mxkey. but i have got error shown below

MXKEY Serial: [FT SCR2000 0] - C0819513
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 1.6.20.0 , NTMP ver: 1.6.20.1
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 00EC 2254 [Samsung K8S6415ETC,64 Mbits] page size: 64 K type: NOR area: 01000000-017FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: A97E B21A 2310 0340 C205 E001 20A2 6114
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00A6878FA3BDA66
ASIC type: 11
UEM Imei: 35799603938223
Flash Imei: BAD8282F427FBE
MasterCode: AF4AF33F72
Invalid imei checksum !

plz help !

[hermanpatel_14]

Dear friends i have found it. It is sim ic . change it that's all than flash it..



DON'T FORGET TO SAY THANX>>>

[KKBaruah]

Originally Posted by hermanpatel_14

dear friend, i have nokia 1661 which was water damage , i cleaned the fone alma and fone didn't turn on . so i try to flash with mxkey. but i have got error shown below

plz help !

See this things
ASIC type: 11
UEM Imei: 35799603938223
Flash Imei: BAD8282F427FBE

Shows error because
Flash Imei: BAD8282F427FBE

[gbluez]

- try to erase first,
- check flash chip, upp and uem for corrosive damage.