Nokia 5130x full flash but not power on (ANSWERED) - GSM-Forum

robin25 · 03-12-2012, 07:50

Here is but check logo by mxkey

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085A4D1
Using device: HTI, FW ver: 00.50, SN: 0000B580
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 24B00119611E0056ACA2868F7B1BA822DCDCB849
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
TransmissionMode: DDR&TX2
Original Imei: 352700045*****
Original Product code: 0579023
Bluetooth ID: A04E04488E1B

Here is flashing logo

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085A4D1
Using device: HTI, FW ver: 00.50, SN: 0000B580
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 24B00119611E0056ACA2868F7B1BA822DCDCB849
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 11.598 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 58.953 s
Processing PPM file: rm495__07.97.ppm_mh
[BB5,BB5 ALGORITHM] size: 7.04 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 28.542 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 23.715 s
Processing CNT file: rm495__07.97_v2.image_mh_red
[BB5,BB5 ALGORITHM] page size: 128 K size: 8.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 39.232 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 27.956 s
Total time for flashing process(boot+erase+write) was 4 min 16.646 s

FULL FACTORY... Failed! (0102)
Completed in 2 min 3.188 s

Please help me how to repair this phone by hardware or software
please help me guys urgently

.::ZUBER::. · 03-12-2012, 09:20

bro. 1st update mxkey to v3.5 rev1.8 then flash it & if not solve then do quick fix>downgrade & click do job, if not solve then 2nd replace AVILMA ic can do the job.

danishalnoor · 03-12-2012, 21:15

Quote:

Originally Posted by zuberchowdhry

bro. 1st update mxkey to v3.5 rev1.8 then flash it & if not solve then do quick fix>downgrade & click do job, if not solve then 2nd replace AVILMA ic can do the job.

U sure this process supported for Sl3 phone?
is it not destroyed Simlock data?

.::ZUBER::. · 03-12-2012, 21:35

bro. its support all simlocks, its a downgrade patch to fix if by mistake flashed with downgrade firmware. most people thinks that we are downgrading by doing this.

gbluez · 03-13-2012, 01:01

Quote:

Originally Posted by zuberchowdhry

bro. 1st update mxkey to v3.5 rev1.8 then flash it & if not solve then do quick fix>downgrade & click do job, if not solve then 2nd replace AVILMA ic can do the job.

this method is NOT APPLICABLE FOR SL3 PHONES

@robin:
open the phone, check phone HW. most case: half dead flash chip. reheat, reball, else change.

rabirabi · 03-13-2012, 08:00

bro remove camera then check
if not solve remove bluetooth ic then check

finally if the problem presists then rehot/reball flash chip.

03-12-2012, 07:50	#1 (permalink)
robin25 No Life Poster Join Date: May 2008 Location: IN mobile's Posts: 1,078 Member: 771565 Status: Offline Sonork: 100.1656305 Thanks Meter: 145	Nokia 5130x full flash but not power on (ANSWERED) Here is but check logo by mxkey MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085A4D1 Using device: HTI, FW ver: 00.50, SN: 0000B580 Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385 Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012) CMT Data : SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x] EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 24B00119611E0056ACA2868F7B1BA822DCDCB849 ASIC MODE ID: 00 ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723 ROM ID: 273F6D55DFAAF68F SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00 Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 eBB5ProtocolType: OLD Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT Storage content: 0000 0000 0000 0000 0000 0000 0000 0000 Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT TransmissionMode: 16Bit Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010 Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0 TransmissionMode: DDR&TX2 Original Imei: 352700045***** Original Product code: 0579023 Bluetooth ID: A04E04488E1B Here is flashing logo MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C085A4D1 Using device: HTI, FW ver: 00.50, SN: 0000B580 Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed) Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385 Module ver: 1.0.0.19815(08-01-2012), Library ver: 1.0.0.13716(10-01-2012) CMT Data : SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x] EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 24B00119611E0056ACA2868F7B1BA822DCDCB849 ASIC MODE ID: 00 ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723 ROM ID: 273F6D55DFAAF68F SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00 Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 eBB5ProtocolType: OLD Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT Storage content: 0000 0000 0000 0000 0000 0000 0000 0000 Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT TransmissionMode: 16Bit Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010 Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002 CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0 TransmissionMode: DDR&TX2 Processing MCU file: rm495__07.97.mcusw [BB5,BB5 ALGORITHM] size: 18.20 MB Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000 Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK Erase size: 21 MB CMT FLASH,NOR area [00000000-000006BF] CMT FLASH,NOR area [000006C0-0001FFFF] CMT FLASH,NOR area [00040000-000BFFFF] CMT FLASH,NOR area [000C0000-0013FFFF] CMT FLASH,NOR area [00140000-0137FFFF] CMT FLASH,NOR area [01380000-0151FFFF] erased in 1 min 11.598 s Prog.status for Asic CMT ... NOR: OK Flash programming ... CMT NOLO block sent CMT KEYS block sent CMT PRIMAPP block sent CMT PASUBTOC block sent CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent CMT UPDAPP block sent CMT DSP0 block sent CMT MCUSW block sent Prog.status for Asic CMT ... NOR: OK Programming completed in 58.953 s Processing PPM file: rm495__07.97.ppm_mh [BB5,BB5 ALGORITHM] size: 7.04 MB Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000 Erase size: 8.62 MB CMT FLASH,NOR area [01520000-01DBFFFF] erased in 28.542 s Prog.status for Asic CMT ... NOR: OK Flash programming ... Prog.status for Asic CMT ... NOR: OK Programming completed in 23.715 s Processing CNT file: rm495__07.97_v2.image_mh_red [BB5,BB5 ALGORITHM] page size: 128 K size: 8.26 MB Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000 Erase size: 34 MB CMT FLASH,NOR area [01DC0000-0215FFFF] CMT FLASH,NOR area [02160000-03FBFFFF] erased in 39.232 s Prog.status for Asic CMT ... NOR: OK Flash programming ... Prog.status for Asic CMT ... NOR: OK Programming completed in 27.956 s Total time for flashing process(boot+erase+write) was 4 min 16.646 s FULL FACTORY... Failed! (0102) Completed in 2 min 3.188 s Please help me how to repair this phone by hardware or software please help me guys urgently

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21

03-12-2012, 09:20	#2 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	bro. 1st update mxkey to v3.5 rev1.8 then flash it & if not solve then do quick fix>downgrade & click do job, if not solve then 2nd replace AVILMA ic can do the job.

03-12-2012, 21:35	#4 (permalink)
.::ZUBER::. No Life Poster Join Date: Apr 2006 Location: MXBOX THUNDER Helpdesk Age: 50 Posts: 4,273 Member: 262425 Status: Offline Sonork: 100.1617691 Thanks Meter: 1,264	bro. its support all simlocks, its a downgrade patch to fix if by mistake flashed with downgrade firmware. most people thinks that we are downgrading by doing this.

03-13-2012, 08:00	#6 (permalink)
rabirabi Freak Poster Join Date: Jun 2009 Location: Nepal Posts: 406 Member: 1061924 Status: Offline Sonork: 100.1612111 Thanks Meter: 95	bro remove camera then check if not solve remove bluetooth ic then check finally if the problem presists then rehot/reball flash chip.