Phone fail startup HELP PLEASE ! - GSM-Forum

mercury · 04-10-2011, 21:41

Hi to all ...

Can someone help me with this problem ?

N79 RM-348 product code -0548645

Where am I going wrong ?

mercury

gbluez · 04-10-2011, 22:39

hi,
press Image DL, re-download your flashes. you can skip MMC.
repeat flashing.

BR

mercury · 04-11-2011, 13:01

Quote:

Originally Posted by gbluez

hi,
press Image DL, re-download your flashes. you can skip MMC.
repeat flashing.

BR

Yes I have done that ... Phone start up fail contact your retailer still show !

Is this now rpl perhaps ? If so how do i repair ?

mercury

h-helmi · 04-11-2011, 14:52

I think you have to flash all this
mcu
ppm
cnt
ppm2
cnt

tested by me

zeus6687 · 04-11-2011, 15:01

Contact [email protected]

im3022 · 04-11-2011, 15:09

BRO recharge bettry 1000% solution
contact us [email protected]

rana_g_mobiles · 04-11-2011, 15:58

full flash woth mark cnt 128k convert
after flash your problem solve

mercury · 04-11-2011, 19:47

Thank you to all .... I did all the above but no joy ... I was told I can not repair using usb flashing only but to use fbus ...so I will try jaf and fbus tomorow

Thank to all !

mercury

manbir · 04-11-2011, 19:57

Quote:

Originally Posted by mercury

Thank you to all .... I did all the above but no joy ... I was told I can not repair using usb flashing only but to use fbus ...so I will try jaf and fbus tomorow

Thank to all !

mercury

The only problem that i see here is the version that you are using right now is the old one .... update to the latest version and also update the nokia module ... And also if the phone does not go ahead with the process you can boot your phone manually and then put the phone in PC suite mode ... ALL will be OK.

BR / Manbir

mercury · 04-12-2011, 10:44

Quote:

Originally Posted by manbir

The only problem that i see here is the version that you are using right now is the old one .... update to the latest version and also update the nokia module ... And also if the phone does not go ahead with the process you can boot your phone manually and then put the phone in PC suite mode ... ALL will be OK.

BR / Manbir

Ok I updated to new nokia 1.9 but still the same problem - Phone start up fail !

mercury

sajohaker · 04-12-2011, 10:55

Please show us the bus check info..

manbir · 04-12-2011, 11:13

Quote:

Originally Posted by mercury

Ok I updated to new nokia 1.9 but still the same problem - Phone start up fail !

mercury

What i also mentioned in the post was if the phone does not start up properly turn on the phone manually with the cable attached and then put the phone is PC Suite mode ... it will complete the process it self ...

BR / Manbir

mercury · 04-12-2011, 11:18

Quote:

Originally Posted by sajohaker

Please show us the bus check info..

Here is the bus check info

mercury

mercury · 04-12-2011, 11:20

Quote:

Originally Posted by manbir

What i also mentioned in the post was if the phone does not start up properly turn on the phone manually with the cable attached and then put the phone is PC Suite mode ... it will complete the process it self ...

BR / Manbir

My phone does not get to the part of starting up past the message - phone start up failed .contact service centre ! .. So pc suite does not recognize my phone !!

net.tarik · 04-12-2011, 11:22

again flash your phone in Tik fast flash and Dead usb mode.

04-11-2011, 19:47	#8 (permalink)
mercury Freak Poster Join Date: Apr 2001 Location: UK Posts: 468 Member: 4145 Status: Offline Thanks Meter: 14	Big thank you Thank you to all .... I did all the above but no joy ... I was told I can not repair using usb flashing only but to use fbus ...so I will try jaf and fbus tomorow Thank to all ! mercury

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

04-10-2011, 22:39	#2 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	hi, press Image DL, re-download your flashes. you can skip MMC. repeat flashing. BR

04-11-2011, 14:52	#4 (permalink)
h-helmi Junior Member Join Date: Mar 2005 Age: 51 Posts: 22 Member: 122316 Status: Offline Thanks Meter: 2	I think you have to flash all this mcu ppm cnt ppm2 cnt tested by me

04-11-2011, 15:01	#5 (permalink)
zeus6687 Insane Poster Join Date: Jan 2007 Posts: 59 Member: 434090 Status: Offline Thanks Meter: 4	Contact [email protected]

04-11-2011, 15:09	#6 (permalink)
im3022 No Life Poster Join Date: Mar 2010 Location: Dubai Posts: 1,297 Member: 1259046 Status: Offline Sonork: 100.1608453 Thanks Meter: 1,229	BRO recharge bettry 1000% solution contact us [email protected]

04-11-2011, 15:58	#7 (permalink)
rana_g_mobiles Freak Poster Join Date: Oct 2010 Location: pakistan lalamusa Posts: 381 Member: 1421704 Status: Offline Thanks Meter: 64	full flash woth mark cnt 128k convert after flash your problem solve

04-12-2011, 10:55	#11 (permalink)
sajohaker No Life Poster Join Date: Feb 2008 Location: Bosnia Posts: 865 Member: 698071 Status: Offline Sonork: 100.1622915 Thanks Meter: 283	Please show us the bus check info..

04-12-2011, 11:22	#15 (permalink)
net.tarik No Life Poster Join Date: Jun 2010 Location: Green Forest Posts: 1,125 Member: 1316000 Status: Offline Sonork: 100.1624093 Thanks Meter: 348	again flash your phone in Tik fast flash and Dead usb mode.