Problem With HTI Frimware Begin transaction ... Initializing HTI ... HTI initialized. Boot version: 00.07 Serial: 0000DXXX Receive firmware from server ... SERVER->Served by MXKEY - BLADE Z at upd, agent version 1.1 revision 1.0 Firmware version on server: 00.48 changes: added: boot mode switch function improved: serial and flash bus communication routine added: dct4 product data calc algorithm minor bug fixed. Received buff checksum verified OK. Updating HTI firmware, please WAIT ... HTI firmware update OK. » End transaction (status: 0, Successfull) Waiting HTI in application mode ... 0049 Not on Server Update 3 time but still same 0048 |
Problem With HTI Frimware Yes Problem Update :( Where is Version 49 ? Server is Update Version 48 ???? Receive firmware from server ... SERVER->Served by MXKEY - BLADE Z at upd, agent version 1.1 revision 1.0 Firmware version on server: 00.48 changes: added: boot mode switch function improved: serial and flash bus communication routine added: dct4 product data calc algorithm minor bug fixed. Received buff checksum verified OK. Updating HTI firmware, please WAIT ... |
Yes problem is right where Firmware 00.49. |
problem with hti after update hti, it won't recognize it it says device code error10, this device cannot start |
bro same here new box f w not rellese here Using device: HTI Flasher Interface (WinUSB) Connection status: EHCI:HUB:HUB:USB 2.00 Full-speed Interface: MXBOX/HTI (Powered by MXKEY) Boot ver: 00.07, Box SN: 0000C1AD FW version: 00.48 HTI Flasher Interface (WinUSB) ready. |
Waiting for HTI in boot mode ... » Begin transaction ... Initializing HTI ... » End transaction (status: 3, Failed to read device info.) I am try to 15 time but problem is same |
Quote:
Please post here log. I think All user have same problem. B.R., B.Uttam |
not 49 just 48 all update box is 48 and after update found new inter face and agen update driver please mr manole all time update box and after reinstal box driver fix this not for other box this work |
me too so where is manole to clarify this ? |
Same problem with me brother. Any one user update HTI box with V 00.49? |
dose not chake ay mdel |
|
Begin transaction ... Initializing HTI ... HTI initialized. Boot version: 00.07 Serial: 000037xx Receive firmware from server ... SERVER->Served by MXKEY - BLADE Z at upd, agent version 1.1 revision 1.0 Firmware version on server: 00.48 changes: added: boot mode switch function improved: serial and flash bus communication routine added: dct4 product data calc algorithm minor bug fixed. Received buff checksum verified OK. Updating HTI firmware, please WAIT ... HTI firmware update OK. » End transaction (status: 0, Successfull) Waiting HTI in application mode ...Done. not 49. |
HTI Serial: 00 HTI Boot ver: 00.07 HTI FW ver: 00.50 CARD Serial: C0 CARD FW ver: 00.20 Counter remain: 96,38% Licenses: 0 = True 0 = True 2 = True DCT4PLUS License: True SL3 License: True - Registered to: FW ver:00.50....????? |
all ok...................................... Using device: HTI Flasher Interface (WinUSB) Connection status: UHCI:HUB:USB 2.00 Full-speed Interface: MXBOX/HTI (Powered by MXKEY) Boot ver: 00.07, Box SN: 00000xxx FW version: 00.50 HTI Flasher Interface (WinUSB) ready. NK module version: 1.24 NK applet version: 00.20 NK module ready. HTI connected as additional security service. STANDALONE MODE enabled. Please "Scan" or "BUS check" before any operation ... |
All times are GMT +1. The time now is 17:50. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -