Unable to flash Nokia 9500 (ANSWERED)

[Futuro]

Hi,

As I try to flash a Nokia 9500 I get this:

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9100(23-12-2010), 1.0.0.15124(23-12-2010)
ASIC ID: 0x1130 [UPP_8M ver: 3.0 or 3.01 or 3.1]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.79.0 revision: 0.7 size: 0x9D8
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2A7E [AMD S29NS032J,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: DEAD DEAD DEAD DEAD DEAD DEAD DEAD DEAD
Algorithm: u_amd.fia [DCT4 ALGORITHM] version: 4.79.0 revision: 0.7 size: 0x78C0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 0051B17D:2984DA60
ASIC type: 2
UEM Imei: 35************
Flash Imei: 35************
MasterCode: 6165602017
RPL saved to "C:\mobileEx\3.4\data\backup\35430500205543_BACK.r pl"

And it doesn't find the phone after this!...

What does that highlighted in red mean?


Thanks

[gbluez]

hi,
red mark: you or some one else has pressed 'reset data1' on mxkey
this is our signature on dct4 after data1 reset

all you need is now erase by get address, don't forget to untick 'safe erase'

ps.
you know how to handle dct4 ape adsp , right?


BR