erroer in cnt flash 6230i (ANSWERED)

[MAGYVER]

hello freinds i need your help in 6230i
when i flash it with mxbox hti flasher interface flashing stop in cnt
mcu ok but the next stop
i synchronise the box
change firmware of 6230i
change cable
but still same problem

there is the log

MXKEY [FT SCR2000 0], SN: 00000000
Using device: HTI, FW ver: 00.50, SN: 00000000
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.20766(30-03-2012), Library ver: 1.0.0.14016(30-03-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35600000321263_BACK.r pl).
Processing MCU file: rm72_73_11003.890
[TIKU BT2,TIKU ALGORITHM] size: 10.14 MB
Supported Ids: 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 00EF36A5:977ADA60
Area [00000000-0000FFFF] erased in 0.421 s
Area [00010000-009FFFFF] erased in 1 min 3.688 s
Area [00A00000-00B3FFFF] erased in 8.140 s
Area [00B60000-00FAFFFF] erased in 28.078 s
Flash programming ...
Programming completed in 1 min 17.140 s
File processed in 3 min 6.703 s
Processing CNT file: rm72_73_110M_03.89.ucp_G
[TIKU BT2,TIKU MON CSM] size: 3.93 MB
Supported Ids: 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_oncsm.fia [TIKU MON CSM] version: 4.76.0 revision: 0.7 size: 0x5660
Supported Ids: 1051, 1052, 2051
Mass Memory Storage Device detected.
Configuring MM bus ...
Formating partition ...OK
Opening MM device ...
Erasing disks ...OK

Flash programming ...
Le délai de temporisation de sémaphore a expiré
Error while programming [2E] at 0x01000020, Result: 0000
flashing terminated !

[.::ZUBER::.]

bro. hardware issue, give some heat to D455(SD RAM) as per schematic, your problem will solve.

[dielha]

1- full erase
2- relashe it

[inside-d-saul]

Originally Posted by MAGYVER

hello freinds i need your help in 6230i
when i flash it with mxbox hti flasher interface flashing stop in cnt
mcu ok but the next stop
i synchronise the box
change firmware of 6230i
change cable
but still same problem

there is the log

try with rm72_73_110E..... not 110M....

[gbluez]

Originally Posted by inside-d-saul

try with rm72_73_110E..... not 110M....

no way. If HW is M, flash file also should be M.
i saw two guys have problem with DCT4 TIKU based phone.

issue passed to Alim already. will be fixed on next update