x6 always invalid sim
 

HLP ME PLS


MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0802787
Using device: HTI, FW ver: 00.50, SN: 00003526
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 17400112E2240052DCDB2447F8C7D256694E154C
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 12.8.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0050 - 0000 0031 [Samsung ] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 12.8.0 revision: 2.0 size: 0x8B49D
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: E00DA77BF32983F864BC7671FE7709A29D8E2C08
Original Imei: 3----------------
Original Product code: 0--------
Bluetooth ID: 20D607961555
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Phone type: RM-559 (Nokia X6-00)
SW version: V ICPR72_11w16.1 28-07-11 RM-559 (c) Nokia
ApeCoreSw: V 40.0.002
Imei plain: 3---------ok-4
Product code: ---------
Battery voltage: 4589 mV, current: 108 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: -------------ok
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2340000100000000
PROFILE_BITS: 8000000000000000

BLOCK1: 1=OPEN, 2=OPEN

Post Selftest Logs,

Check for Hardware.


BR,
ZUBER

Phone Type: RM-559
SW version: V ICPR72_11w16.1 28-07-11 RM-559 (c) Nokia

ID Test name Startup Result
88 TAHVOINT Y passed
46 UEM_CBUS_IF Y passed
3 EAR_DATA_LOOP Y passed
12 SIM_CLK_LOOP Y passed
13 SIM_IO_CTRL_LOOP Y passed
33 SIM_LOCK N passed
93 SECURITY N passed
90 PWR_KEY N passed
2 CURRENT_CONS N passed
20 BACKUP_BATT N passed
42 RADIO N passed
96 HOOKINT N passed
101 BTEMP N passed
8 MBUS_RX_TX_LOOP Y !no signal
32 AMB_LIGHT_SENSOR N passed
119 IIC N passed
117 DIGIMIC N passed
108 EXT_DEVICE N passed
56 CDSP_SLEEPCLK_FREQ N passed
128 CDSP_SLEEPCLOCK_FREQ N passed
86 CDSP_RF_BB_IF N passed
83 CDSP_RF_SUPPLY N passed
85 CDSP_TX_IQ N passed
74 CDSP_TXC_DATA N passed
79 CDSP_RX_PLL_PHASE_LOCK N passed
80 CDSP_TX_PLL_PHASE_LOCK N passed
75 CDSP_WCDMA_TX_POWER N !unknown(14 0) -
81 CDSP_RX_IQ_LOOP_BACK N passed
77 CDSP_GSM_TX_POWER N !unknown(14 0) -
7 KEYBOARD_STUCK N !no signal
21 LPRF_IF N !no signal
22 CAMERA_IF N !no signal
5 CAMERA_ACCELERATOR N !not ready
37 SEC_CAMERA_IF N passed
121 LED_FLASH N !unknown(14 0) -
38 CAMERA_AUTOFOCUS N !no signal
44 LPRF_AUDIO_LINES N !no signal
59 MAIN_LCD_IF N !no signal
60 TOUCH_STUCK N !not ready
71 BT_WAKEUP N passed
72 WLAN N passed
92 BT_WLAN_COEXISTENCE N passed
103 TOUCH_IF N passed
104 ACCEL_IF N passed
113 LCD_CONTROLLER N passed
49 VIBRA N passed
91 USB_LOOP N passed
42 RADIO N passed
115 TVOUT_IF N passed
114 IO_EXPANDER_IF N passed

Sometime goes Horrible,

All Test seems to be OK,
Check in Hardware,
Can Reflow PCB with caution.


BR,
ZUBER

dear your phone not full unlock not open all blocks see this BLOCK1: 1=OPEN, 2=OPEN:D



BR.
Arsalan gsm2000:)

ok then how to clear i hav calculated codes