RCD PRO Tools v0.1.0.0 - unlocking RCD 310 / 510 etc - Page 3 - GSM-Forum

Tech mobil · 12-20-2010, 16:47

RCD PRO V0.0.4.3 - RNS-E Aisin over flash dump & Kenwoods

Latest Update:
- Kenwood, KDC-506
- Kenwood, KDC-DNX7220
- Kenwood, KMD-6527 Mini Disc Receiver
- RNS-E ( Audi ), 8E0 035 192E, AISIN AW
- RNS-E Basic EU ( Audi ), 4B0 034 192P, AISIN AW

About Kens: collection grows rapidly, thanks to users !

About AISIN: RNS-E by AISIN AW is supported under following conditions:
- it works by code reading from MBM29XL12DF flash dump
- it works on various navi versions, where this flash is used in (90-pin plastic SSOP)

Download it:
http://martech.pl/download/RCDPRO/rcdpro.zip

Best Regards
Martech Team
MARTECH

Tech mobil · 12-21-2010, 12:33

LOCK13 Tools - Land Rover & ST92 supported

Version 1.3 supports:
- Land Rover 6500 CD- Europe, XQE000160PMA
- Ford radios based on ST92 (for example 6000NE)

Detailed instructions you can find in user manual:
http://martech.pl/download/CLIP/LOCK13/LOCK13_EN.pdf
http://martech.pl/download/CLIP/LOCK13/LOCK13_PL.pdf

Latest version:
http://martech.pl/download/CLIP/LOCK13/LOCK13_Tool.zip

Martech Team
MARTECH

Tech mobil · 12-22-2010, 11:23

RCDPRO update - Navi Dresden supported

We are pleased to show next update, this time:
- RCDPRO_TechniSat standalone application for CLIP

Possible functions:
- reading out original radio code
- keyboard test mode

Instructions, schematics, program - as ordinary are availables on PRO section.

To be continued..
Martech Team.
MARTECH

Tech mobil · 01-05-2011, 10:05

Goldies oldies.. VW GAMMA3 by Philips in support !

GAMMA 3 by Philips
(application for these models: RCDPRO_GAMMA3_vXX.prg (where XX it’s current version)
· reading basic device informations
· read/write eeprom memory
· reading out original radio code
· power on/off test

Max time for finding code is 56 minutes !

Regards
Martech Team
MARTECH

Tech mobil · 01-22-2011, 10:00

RCDPRO PC v0.0.4.4 - Connect Navi+ by Magneti Marelli

Latest update allows to read original code from navigation used in Alfa Romeo cars.

Supported:
- 156068727, Magneti Marelli, Connect Navi+ ( Alfa Romeo )

You must read TE28F640 flash and use rcdpro.exe to get code.

Update:
- free as usual, run exe for selfupdate or download from:
http://martech.pl/download/PRO/rcdpro.zip

Next models? In next updates

Martech Team
MARTECH

Tech mobil · 02-06-2011, 10:13

RCDPRO Tools V0.0.4.5 - Connect+ Navi supported

Using this update you can decode next navigation from Alfa Romeo cars:
- Connect+ Navi which is based on two flash ic 28F320

You must read two flashes to get original code, tool will read it automatically from dumps.

Run you rcdpro.exe to get automatic update

(or download from http://martech.pl/download/PRO/rcdpro.zip )

Best regards!
Martech Team
MARTECH

Tech mobil · 02-11-2011, 11:00

RCDPRO V0.0.4.6 - Panasonic DVD car players 2011-02-11

So, on customers demand we add:

- Matsu****a, CQ-VD6503N DVD
- Matsu****a, CQ-VD6503U DVD
- Matsu****a, CQ-VD6503W DVD
- Matsu****a, CQ-VD7003N DVD
- Matsu****a, CQ-VX100N

Some of models are based on FM25L16 (16Kb FRAM Serial 3V Memory), some on 24c01.

Possible functions:
- read original code, reset counter, changing code to new one specified by user, code off, checking crc in dump

Run your rcdpro.exe to get autoupdate or download:
http://martech.pl/download/RCDPRO/rcdpro.zip">RCDPRO V0.0.4.6

If you have unsupported models feel free to contact us

Martech Team
MARTECH

Tech mobil · 02-23-2011, 10:34

RCDPRO 0.0.4.7 - Honda BB717PO & BB727AF navi

Exclusive update for users who asked for this high navigations:
- Alpine, BB717PO ( Honda )
- Alpine, BB727AF ( Honda )

Navigation is based on two flashes LH28F128. You must read both chips and open dumps to get original code.
There is TMS320 also but you don't need to worry about it.. just get code from flash chips!

Next Kenwoods:
- KE0953, Kenwood, KDC-5024V
- KE0952, Kenwood, KDC-5024Y

Run your rcdpro.exe to get autoupdate or download:
http://martech.pl/download/RCDPRO/rcdpro.zip

Martech Team.
MARTECH

Tech mobil · 03-01-2011, 11:37

Martech FIS Tools is a mobile application, supported by Martech CLIP.

The basic features include:
- Read, write and verify eeprom area in FIS processor
- Read and possibly change the code (if the code is not in the database).

Version 1.0 supports models from Audi, Ford, Seat, Skoda, VW and other Blaupunkt versions.
The list of supported models is constantly growing.
FIS Tools ensure safe handling of checked and validated models.
Operation is simple and intuitive. Communication interface consists of only two lines and power lines, which are plugged directly onto target board.

In a short time we will provide testpoint pictures, which will be open on CLIP.

In case you have to decode not supported naviation:
- Watch carefully the radio, take pictures of all the parties and the main board (top and bottom)
- Rewrite all serial numbers, model, manufacturer, type of memory and processors, all the numbers, and symbols to help identify
- Backup memory if you can.
- Send all information to: [email protected]

More photos, descriptions will be available soon.

We say THANKS to all project supporters.

Warning! Special offer only 50 sets of RCD Full Set.

Are you Box II or Key user? Are you interested in Radio Code Full Pack?
Only now, the exhaustion - 50 sets for our regular customers at good price

Set includes:
- Clip device, RCD and RCD PRO activations
- all possible cables and expanders for the above programs

Total Cost: 406,50 EUR netto - 500 EUR with VAT (including shipping by courier).

Interested? Please contact us at [email protected] or sonork: 100.112959

Best Regards
Martech Team
MARTECH

Tech mobil · 03-08-2011, 22:12

Code Calc v1.0 - Radio calculator for CLIP

New free standalone application for CLIP and RCD or PRO users !

Initial version supports:
- Ford M seris
- Renault precalc (also known as security calc, for Philips based models)

Easy navigations - use up/down, left/right keys to select serial number, press OK to calculate.

There is no limits in calculator, you can count as many codes as you like.
Next manufacturers, models - will come on user requests..

We have still some RCD Full sets left - contact [email protected] for details.

Download it:
http://martech.pl/download/CLIP/Code_Calc/Code_Calc.zip

Martech Team.
MARTECH

Tech mobil · 03-26-2011, 10:16

Rcdpro 0.0.4.8 - Zenec 2000 in support

Latest Update:

- Zenec, ZE-MC2000
- Matsu****a, CQ-VD550W3 DVD

MC2000 decoding goes via reading original dump from processor. Details inside Rcdpro.

Other changes:
- New CLIP Firmware : 02.00.00.03 (automatic update after launch, do not interrupt)
- Added support for SPI and Microwire Memory in Box 2 Plus, and CLIP (Read & Write modes for 8 / 16 bit)
- Added support for SPI serial flash memory (25FL128)
- The ability to read through the interface 4-wires and 3-wires (schematics stored in Programmer bookmark)
- Detection of connected memory for Microwire
- Added ability to put direct links into tool
- Swap Buf. - additional button to swap memory in Dump mode (after use the program again executes the code reading algorithm, this time for inverted bytes)
- Direct Mode is parametrized by Bus speed and Device address
- Added information about the differences in file size, Rcdpro informs what is to be valid
- Added connection diagrams for new protocols directly in the tool
- Programmer tab will store all the possible protocols supported by Clip
- Main menu improvement (works more stable and faster)
- The program remembers the chosen model, you don't need to choose again if dump is bad
- Added option to reload the file from the dump
- Scrollbar in the main menu works as it should and does not move into the void

Tools installer:
http://martech.pl/support/setup_rcdx.exe

Best regards
Martech Team
MARTECH

Tech mobil · 03-30-2011, 11:36

RCDPRO V0.0.4.9 - Fast RCD310/510 decoding supported

New functions:
- fast decoding, no need expander at all, pure direct connection.
- repairing units with overwritten eeprom area
- NEC microcontrollers programmer (read, write of big models range)

Run rcdpro.exe to get self update or download and run:
http://martech.pl/support/setup_rcdx.exe

Martech Team
www.martech.pl

Tech mobil · 04-27-2011, 20:09

TMS370 Tools V0 1.

We are glad to present new application for direct code reading from radios based on TMS370 cpu.
Whole process takes only second to get original code.

Supported functions:
- Reset Counter (Wait30, totally blocked with "TEN" on screen supported also)
- Read Code (takes 1 second)
- Help (connection pinout to target board)

Supported models:
- Ford: 2006 RDS, 2006R RDS, 2007 RDS, 2007R RDS
- Seat: 2007 RDS
- VW: Sound1 RDS, Sound2 RDS

Supported cpu's:
- TMS370C758A (N760050BFKC103)
- TMS370C758A (N760050BFKC105)
- TMS370C758A (N760050BFKC107)
- TMS370C058 (N760050BFKC108)

Easy connection with 3 signals from Port1 (TXD, RXD & GND), detailed info is build in tool.
RCD PRO activation & Clip are required for proper working.

Download it:
http://martech.pl/support/Clip%20app...s370_tools.prg

More photos you can find out in RCD PRO - Support section.

Best Regards
Martech Team
MARTECH

Tech mobil · 04-29-2011, 20:50

Rcdpro V0.0.4.10 - Zenec 2010 supported!

Latest Update brings to our users:
- Ford 6000 AUX CD RDS EON Ford, 7S5T-18C815-CA, "V Series"
- Kenwood, KDC-W5541U
- Chrysler P05064191AF, BZCY602A
- VW Zenec, ZE-NC2010 (Code is read from flash content)

Run your rcdpro.exe to get autoupdate, or download from http://martech.pl/support/Public/setup_rcdx.exe

Best Regards
Martech Team
MARTECH

Tech mobil · 05-13-2011, 08:00

RCD PRO 0.4.1.12 - ST92 is READY !

Again new microcontrollers were added to PRO application
This time, we are happy to support:

- ST92F120JV1, ST92F120JV9
- ST92F120V1, ST92F120V9
- ST92F124R9, ST92F124V1
- ST92F150CR1, ST92F150CR9
- ST92F150CV1, ST92F150CV9
- ST92F150JDV1
- ST92F250CV2

Possible operatons:
- Read, Erase, Write & Verify

Possible areas to work:
- full (flash, eeprom, OTP)
- flash (so called firmware)
- eeprom
- OTP area (read only, due of security reasons)

Direct connections from Port2 to target board, connection schematic is build in tool.
HC(7)05, HC(7)11 were added into rcdpro.exe too !

Every pinout is displayed on Clip LCD, did you saw it?

We are waiting for working feedbacks, tool will be optimalized for users demands.
Get autoupdate - run rcdpro.exe or download and use installer:
http://martech.pl/support/setup_rcdx.exe

Best Regards
Martech Team

03-01-2011, 11:37	#39 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	Martech FIS Tools is a mobile application, supported by Martech CLIP. The basic features include: - Read, write and verify eeprom area in FIS processor - Read and possibly change the code (if the code is not in the database). Version 1.0 supports models from Audi, Ford, Seat, Skoda, VW and other Blaupunkt versions. The list of supported models is constantly growing. FIS Tools ensure safe handling of checked and validated models. Operation is simple and intuitive. Communication interface consists of only two lines and power lines, which are plugged directly onto target board. In a short time we will provide testpoint pictures, which will be open on CLIP. In case you have to decode not supported naviation: - Watch carefully the radio, take pictures of all the parties and the main board (top and bottom) - Rewrite all serial numbers, model, manufacturer, type of memory and processors, all the numbers, and symbols to help identify - Backup memory if you can. - Send all information to: [email protected] More photos, descriptions will be available soon. We say THANKS to all project supporters. Warning! Special offer only 50 sets of RCD Full Set. Are you Box II or Key user? Are you interested in Radio Code Full Pack? Only now, the exhaustion - 50 sets for our regular customers at good price Set includes: - Clip device, RCD and RCD PRO activations - all possible cables and expanders for the above programs Total Cost: 406,50 EUR netto - 500 EUR with VAT (including shipping by courier). Interested? Please contact us at [email protected] or sonork: 100.112959 Best Regards Martech Team MARTECH Last edited by Tech mobil; 03-02-2011 at 11:27.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
DES key Driver	black	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	02-08-2014 04:50
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

12-20-2010, 16:47	#31 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCD PRO V0.0.4.3 - RNS-E Aisin over flash dump & Kenwoods Latest Update: - Kenwood, KDC-506 - Kenwood, KDC-DNX7220 - Kenwood, KMD-6527 Mini Disc Receiver - RNS-E ( Audi ), 8E0 035 192E, AISIN AW - RNS-E Basic EU ( Audi ), 4B0 034 192P, AISIN AW About Kens: collection grows rapidly, thanks to users ! About AISIN: RNS-E by AISIN AW is supported under following conditions: - it works by code reading from MBM29XL12DF flash dump - it works on various navi versions, where this flash is used in (90-pin plastic SSOP) Download it: http://martech.pl/download/RCDPRO/rcdpro.zip Best Regards Martech Team MARTECH

12-21-2010, 12:33	#32 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	LOCK13 Tools - Land Rover & ST92 supported Version 1.3 supports: - Land Rover 6500 CD- Europe, XQE000160PMA - Ford radios based on ST92 (for example 6000NE) Detailed instructions you can find in user manual: http://martech.pl/download/CLIP/LOCK13/LOCK13_EN.pdf http://martech.pl/download/CLIP/LOCK13/LOCK13_PL.pdf Latest version: http://martech.pl/download/CLIP/LOCK13/LOCK13_Tool.zip Martech Team MARTECH

12-22-2010, 11:23	#33 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO update - Navi Dresden supported We are pleased to show next update, this time: - RCDPRO_TechniSat standalone application for CLIP Possible functions: - reading out original radio code - keyboard test mode Instructions, schematics, program - as ordinary are availables on PRO section. To be continued.. Martech Team. MARTECH

01-05-2011, 10:05	#34 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	Goldies oldies.. VW GAMMA3 by Philips in support ! GAMMA 3 by Philips (application for these models: RCDPRO_GAMMA3_vXX.prg (where XX it’s current version) · reading basic device informations · read/write eeprom memory · reading out original radio code · power on/off test Max time for finding code is 56 minutes ! Regards Martech Team MARTECH

01-22-2011, 10:00	#35 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO PC v0.0.4.4 - Connect Navi+ by Magneti Marelli Latest update allows to read original code from navigation used in Alfa Romeo cars. Supported: - 156068727, Magneti Marelli, Connect Navi+ ( Alfa Romeo ) You must read TE28F640 flash and use rcdpro.exe to get code. Update: - free as usual, run exe for selfupdate or download from: http://martech.pl/download/PRO/rcdpro.zip Next models? In next updates Martech Team MARTECH

02-06-2011, 10:13	#36 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO Tools V0.0.4.5 - Connect+ Navi supported Using this update you can decode next navigation from Alfa Romeo cars: - Connect+ Navi which is based on two flash ic 28F320 You must read two flashes to get original code, tool will read it automatically from dumps. Run you rcdpro.exe to get automatic update (or download from http://martech.pl/download/PRO/rcdpro.zip ) Best regards! Martech Team MARTECH

02-11-2011, 11:00	#37 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO V0.0.4.6 - Panasonic DVD car players 2011-02-11 So, on customers demand we add: - Matsu**a, CQ-VD6503N DVD - Matsua, CQ-VD6503U DVD - Matsua, CQ-VD6503W DVD - Matsua, CQ-VD7003N DVD - Matsua, CQ-VX100N Some of models are based on FM25L16 (16Kb FRAM Serial 3V Memory), some on 24c01. Possible functions: - read original code, reset counter, changing code to new one specified by user, code off, checking crc in dump Run your rcdpro.exe to get autoupdate or download: http://martech.pl/download/RCDPRO/rcdpro.zip">RCDPRO V0.0.4.6 If you have unsupported models feel free to contact us Martech Team** MARTECH

02-23-2011, 10:34	#38 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO 0.0.4.7 - Honda BB717PO & BB727AF navi Exclusive update for users who asked for this high navigations: - Alpine, BB717PO ( Honda ) - Alpine, BB727AF ( Honda ) Navigation is based on two flashes LH28F128. You must read both chips and open dumps to get original code. There is TMS320 also but you don't need to worry about it.. just get code from flash chips! Next Kenwoods: - KE0953, Kenwood, KDC-5024V - KE0952, Kenwood, KDC-5024Y Run your rcdpro.exe to get autoupdate or download: http://martech.pl/download/RCDPRO/rcdpro.zip Martech Team. MARTECH

03-08-2011, 22:12	#40 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	Code Calc v1.0 - Radio calculator for CLIP New free standalone application for CLIP and RCD or PRO users ! Initial version supports: - Ford M seris - Renault precalc (also known as security calc, for Philips based models) Easy navigations - use up/down, left/right keys to select serial number, press OK to calculate. There is no limits in calculator, you can count as many codes as you like. Next manufacturers, models - will come on user requests.. We have still some RCD Full sets left - contact [email protected] for details. Download it: http://martech.pl/download/CLIP/Code_Calc/Code_Calc.zip Martech Team. MARTECH

03-26-2011, 10:16	#41 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	Rcdpro 0.0.4.8 - Zenec 2000 in support Latest Update: - Zenec, ZE-MC2000 - Matsu**a, CQ-VD550W3 DVD MC2000 decoding goes via reading original dump from processor. Details inside Rcdpro. Other changes: - New CLIP Firmware : 02.00.00.03 (automatic update after launch, do not interrupt) - Added support for SPI and Microwire Memory in Box 2 Plus, and CLIP (Read & Write modes for 8 / 16 bit) - Added support for SPI serial flash memory (25FL128) - The ability to read through the interface 4-wires and 3-wires (schematics stored in Programmer bookmark) - Detection of connected memory for Microwire - Added ability to put direct links into tool - Swap Buf. - additional button to swap memory in Dump mode (after use the program again executes the code reading algorithm, this time for inverted bytes) - Direct Mode is parametrized by Bus speed and Device address - Added information about the differences in file size, Rcdpro informs what is to be valid - Added connection diagrams for new protocols directly in the tool - Programmer tab will store all the possible protocols supported by Clip - Main menu improvement (works more stable and faster) - The program remembers the chosen model, you don't need to choose again if dump is bad - Added option to reload the file from the dump - Scrollbar in the main menu works as it should and does not move into the void Tools installer: http://martech.pl/support/setup_rcdx.exe Best regards Martech Team** MARTECH

03-30-2011, 11:36	#42 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCDPRO V0.0.4.9 - Fast RCD310/510 decoding supported New functions: - fast decoding, no need expander at all, pure direct connection. - repairing units with overwritten eeprom area - NEC microcontrollers programmer (read, write of big models range) Run rcdpro.exe to get self update or download and run: http://martech.pl/support/setup_rcdx.exe Martech Team www.martech.pl

04-27-2011, 20:09	#43 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	TMS370 Tools V0 1. We are glad to present new application for direct code reading from radios based on TMS370 cpu. Whole process takes only second to get original code. Supported functions: - Reset Counter (Wait30, totally blocked with "TEN" on screen supported also) - Read Code (takes 1 second) - Help (connection pinout to target board) Supported models: - Ford: 2006 RDS, 2006R RDS, 2007 RDS, 2007R RDS - Seat: 2007 RDS - VW: Sound1 RDS, Sound2 RDS Supported cpu's: - TMS370C758A (N760050BFKC103) - TMS370C758A (N760050BFKC105) - TMS370C758A (N760050BFKC107) - TMS370C058 (N760050BFKC108) Easy connection with 3 signals from Port1 (TXD, RXD & GND), detailed info is build in tool. RCD PRO activation & Clip are required for proper working. Download it: http://martech.pl/support/Clip%20app...s370_tools.prg More photos you can find out in RCD PRO - Support section. Best Regards Martech Team MARTECH

04-29-2011, 20:50	#44 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	Rcdpro V0.0.4.10 - Zenec 2010 supported! Latest Update brings to our users: - Ford 6000 AUX CD RDS EON Ford, 7S5T-18C815-CA, "V Series" - Kenwood, KDC-W5541U - Chrysler P05064191AF, BZCY602A - VW Zenec, ZE-NC2010 (Code is read from flash content) Run your rcdpro.exe to get autoupdate, or download from http://martech.pl/support/Public/setup_rcdx.exe Best Regards Martech Team MARTECH

05-13-2011, 08:00	#45 (permalink)
Tech mobil No Life Poster Join Date: Oct 2005 Location: Poland Jasło Age: 48 Posts: 1,139 Member: 186466 Status: Offline Sonork: 100.112959 Thanks Meter: 9,125	RCD PRO 0.4.1.12 - ST92 is READY ! Again new microcontrollers were added to PRO application This time, we are happy to support: - ST92F120JV1, ST92F120JV9 - ST92F120V1, ST92F120V9 - ST92F124R9, ST92F124V1 - ST92F150CR1, ST92F150CR9 - ST92F150CV1, ST92F150CV9 - ST92F150JDV1 - ST92F250CV2 Possible operatons: - Read, Erase, Write & Verify Possible areas to work: - full (flash, eeprom, OTP) - flash (so called firmware) - eeprom - OTP area (read only, due of security reasons) Direct connections from Port2 to target board, connection schematic is build in tool. HC(7)05, HC(7)11 were added into rcdpro.exe too ! Every pinout is displayed on Clip LCD, did you saw it? We are waiting for working feedbacks, tool will be optimalized for users demands. Get autoupdate - run rcdpro.exe or download and use installer: http://martech.pl/support/setup_rcdx.exe Best Regards Martech Team