failed to falsh an 8120
 

hi
i am trying to flash a 8120 but get error

Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
LG 3G phone detected.
Phone CID: 17
Phone color: Brown
Flash certificate: A1_LG_AS_CUSTOMER
Trying Brown CID17 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: AMD
Flash ID: 0x017E
OTP Security Level: 0 (Developer)
OTP CID: 17
Defeating RSA protection...
Defeated!
Sending applet...
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 17
Primary certificate color: Brown
Secondary certificate not found.
GDFS configuration not found.
OSE configuration not found.
TestProgram configuration not found.
Done.
The phone contains recovery certificate!
You MUST reflash the main firmware part!
Phone hardware initialized OK
Flash file: "U8120_V105_UK.flp"
Waiting for flash file to load...
Reading phone RSA certificate...
Preparing to program flash...
Baudrate = 921600Bd
Analysing flash file...
Replacing primary certificate...
Programming flash...
Time: 00:02:49
Preparing to program flash...
Analysing flash file...
Programming flash...
Time: 00:02:29
Preparing to program flash...
Analysing flash file...
Programming flash..
always get this error

Applet error: ERROR|GetFlashInfo|
Error flashing block at address: 0x23010000
Script error: Flash error [9.54.75]

battery must be full charged

flash it with version lower than 105

with lower baurd rate
Error flashing block at address: 0x23000000
Script error: Flash error [9.54.75]

tryed all the version from 101 but no joy
br

flash full gdfs and try to flash your phone

flash full gdfs and try to flash it