K810i "could not start GDFs service"
 

Hi to all ............. :D

There's this K810i ...... cant costumise GDFS ......... :confused:

I flash it completely but when it comes to costumising ..... nothing .... :confused:

And also I had to report the tac number and select its type manualy .....

someone ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ???????????????? :confused:

u should post the log file from cruiser here so we can take a look at it

..............................
 

there it is :.............:D



System diagnostics passed.
Version 13.01 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K810i_CXC1250811_Generic_R6BC002_Red52.ck81sw "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:11:59
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "K810i_CXC1250813_Europe1_R6BC002_Red52.ck81fs "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:05:24
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...

Could not start GDFS service

Try again or just change fully charged battery... ;)

BR

It maybe your K800i db2020 flash chip are damage!

br
simonng83

try (customize FS only) with original USB cable (DCU60 or simillar)

try to write epprom and fotta then reattach phone unlock rsa and cust fs then shutdown fs and reattach and do restore firmware and flash main ur hand set is working and fine
wbr
sachin

You must use DCU-60 or DCU-65 cable.
Next time, DON'T write MANY question marks!

regards,
Filip

hello bro u phone flash chip damage ady u must change it n then empty flash prosedure will soft ur problem.......

Best Regard
WinD:)

you posted bull****...the phone is not chid damaged..

regards,
Filip

hello bro... donot say like..... dis i got do before if donot trust nvm la donot say like dis ma (bull****) ma

Best Regard
WinD:)

you have damage only loader gdfs

i have the same problem right now! i unlock rsa but can't success customize always " could not start gdfs"
last time have that with W810i but flash mainfirmware with gdfs , unlock RSA, customize then direct unlock
here don't know what to do, i flash phone many time! it just blinking red in LED but could not customize

so stil no solution for my problem? where is WINTEC that always help us here?

use uc20 and se tp full unlocker

u must have have gdfs backup from normal phone

backup gdfs from normal phone with gdfs backup/restore(ready to downlod on cruiser suite support site)


br.