>>Cannot attach K700 to Cruiser<< - GSM-Forum

thoyyu · 07-05-2006, 18:05

Hi Guys,

I have dead K700i ...when i try to attach the phone to cruiser it gives me this error "No suitable applet found."

can anyone wats the solution for this problem...i am providinng the log below;

System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

than this error is shown: " No suitable applet found. "

i need an urgent solution pls guys help

thanx in advance

Nizze · 07-05-2006, 19:56

Try whit recovery boot.
And make sure that battery is fully charged.......

Quote:

Originally Posted by thoyyu

Hi Guys,

I have dead K700i ...when i try to attach the phone to cruiser it gives me this error "No suitable applet found."

can anyone wats the solution for this problem...i am providinng the log below;

System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.

than this error is shown: " No suitable applet found. "

i need an urgent solution pls guys help

thanx in advance

zine · 07-05-2006, 22:29

Use Test Point U Connect Sucssefeled Your Phone

thoyyu · 07-06-2006, 08:31

Hi,

I tried alot of time with the recovery boot with a 100% fully charged battery but the samething happens...can it b a hardware problem?....i donno how to use a test point ...

can anyone give me some gud solution

thanx

zine · 07-06-2006, 12:28

verry easy bro go in software cruiser clique in menu page to " introduction" u see all u need and how to ...*** luck

thoyyu · 07-07-2006, 12:32

There is no such option in Cruiser....can anyone else give me any solution

galaxi · 12-29-2006, 22:24

hiii

i have successfull repaired my K700i with same problem

- Select K700 Model
- Use Normal Boot, Any CID, Use TP

1- Flash ARM

disconect phone and connect it on normal Mode
and re Full flash ur phone with Main and fs file and decostumise Fs

good luck

07-05-2006, 18:05	#1 (permalink)
thoyyu Insane Poster Join Date: Apr 2006 Location: Male', Maldives Posts: 99 Member: 260672 Status: Offline Thanks Meter: 20	>>Cannot attach K700 to Cruiser<< Hi Guys, I have dead K700i ...when i try to attach the phone to cruiser it gives me this error "No suitable applet found." can anyone wats the solution for this problem...i am providinng the log below; System diagnostics passed. Version 9.74 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8000 Protocol version: 3.1 Baudrate = 460800Bd Phone color: None Flash certificate: - All threads terminated. than this error is shown: " No suitable applet found. " i need an urgent solution pls guys help thanx in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
>>How to attach T610 to Cruiser<<	thoyyu	Cruiser Suite	5	12-20-2006 23:36
Finding It Impossible To Attach Phone To Cruiser!!	hassan2012	Old Ericsson Phones & Sony Phones	1	12-02-2006 03:22
how to attach phone to w810?	MyGSM	Cruiser Suite	0	04-07-2006 07:39
how to change k700 to k700 empty board.	wintesla	Cruiser Suite	20	07-06-2005 16:28
!!! HOW to attach phones to Cruiser !!! INSTRUCTION	scorpion13	Cruiser Suite	10	06-22-2005 17:28

07-05-2006, 22:29	#3 (permalink)
zine No Life Poster Join Date: Apr 2004 Location: ORAN-ALGERIE Age: 49 Posts: 863 Member: 64213 Status: Offline Thanks Meter: 493	Use Test Point U Connect Sucssefeled Your Phone

07-06-2006, 08:31	#4 (permalink)
thoyyu Insane Poster Join Date: Apr 2006 Location: Male', Maldives Posts: 99 Member: 260672 Status: Offline Thanks Meter: 20	Hi, I tried alot of time with the recovery boot with a 100% fully charged battery but the samething happens...can it b a hardware problem?....i donno how to use a test point ... can anyone give me some gud solution thanx

07-06-2006, 12:28	#5 (permalink)
zine No Life Poster Join Date: Apr 2004 Location: ORAN-ALGERIE Age: 49 Posts: 863 Member: 64213 Status: Offline Thanks Meter: 493	verry easy bro go in software cruiser clique in menu page to " introduction" u see all u need and how to ...*** luck

07-07-2006, 12:32	#6 (permalink)
thoyyu Insane Poster Join Date: Apr 2006 Location: Male', Maldives Posts: 99 Member: 260672 Status: Offline Thanks Meter: 20	There is no such option in Cruiser....can anyone else give me any solution

12-29-2006, 22:24	#7 (permalink)
galaxi Freak Poster Join Date: Aug 2001 Location: Earth Age: 42 Posts: 478 Member: 5915 Status: Offline Thanks Meter: 7	hiii i have successfull repaired my K700i with same problem - Select K700 Model - Use Normal Boot, Any CID, Use TP 1- Flash ARM disconect phone and connect it on normal Mode and re Full flash ur phone with Main and fs file and decostumise Fs good luck