t610 cant attach
 

i flashed t610 with this
T610_TAE_Standard_CXC125562_R4C003.ARM.flp
T610_EU1_CXC125565_R4C003.AVR.flp

then i power on phone and frezes in sand clock i try to reflash but when i connect to cruiser get this:

Version 7.10 beta ready!
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
Trying CID27 applet...
RSA protection feature inactive.
Bypassing authority check...

and retry to connect and always its the same, anyone has been in this problem??

thanks

BR

somtimes it gives problem with attaching do one thing when it stops then put out battery and put in again it will jump 10% more then do it till it will attach the phone after attaching like this way evrything will work as unlock flash i got that problem also always in 610 but this is normal try as i said hope it will work

P.s. When phone will attach plz put the battery cover back so that conection will not drop again

WBR

Wykie

@lgrz55: Do you let it finish the Authority check bypass? It can take up to a minute sometimes...

You've flashed an old firmware to the phone that doesn't use RSA, it uses a different boot method. It'll take Cruiser a little longer to boot this phone.

i put in and put out battery and % will jump and flashed after thats and works!!

thanks Wikie an Muppet

Thats good mate if it worked now this method for evry teasy 610;)

WBR

Wykie