t630 unlocking problem
 

plz i hv sunyericson t630 that seems as its gdfs has damaged by another tool priciselly ufs hwk and if I want to unlock it it shows=
attach log=
System diagnostics passed.
Version 13.21 ready!

[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Booting via ROM...
Trying CID29 applet...
Sending applet prologue...
Sending applet body...
RSA protection feature ACTIVE.
Time spent entering bootstrap: 3s
Initializing phone hardware...
Baudrate = 230400Bd
Defeating RSA protection...
Applet ID: 030820 1010 BACCXC1325345_RECOVERY_...
Defeated!
Phone hardware initialized OK
Firmware: T630 EU4 R6C005 [CXC125782]

then unlocking log=
System diagnostics passed.
Version 13.21 ready!

[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Booting via ROM...
Trying CID29 applet...
Sending applet prologue...
Sending applet body...
RSA protection feature ACTIVE.
Time spent entering bootstrap: 3s
Initializing phone hardware...
Baudrate = 230400Bd
Defeating RSA protection...
Applet ID: 030820 1010 BACCXC1325345_RECOVERY_...
Defeated!
Phone hardware initialized OK
Firmware: T630 EU4 R6C005 [CXC125782]

[ --- Direct Unlock --- ]
Uploading GDFS applet...

Script error: Resource XBCBE61A8 not found
Script error: Failed! (cannot send) [13.21.142]
Error: Could not initialize GDFS access.

plz how will I restore the security area then to unlock it?

Turn off the phone and attach Cruiser to the phone.

· Go to the Security AVR page of the Control Window.

· You may change any of the AVR security zone parameters. These include: phone IMEI, network unlocking codes, network code, number of unlocking attempts, frequency bandlock and a few other options.

· Ensure yourself the option Directly write to GDFS is checked (otherwise an MDC file would be created instead of direct writing to GDFS).

· Press the Create security zone button.

· Detach the phone by clicking the Finalize GDFS button in the GDFS page of Control Window, removing the battery from the phone and disconnecting the phone from cable.