ATF Box is not in USB 2.0 Mode

[mothsd]

ATF Box is not in USB 2.0 Mode
==============================================

* Go to "Product Support" tab and click the
* "Restore Box" Button to fix the Box Firmware

** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers

*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall

**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drive rs.bat
6. ReInstall ATF Software
7. Connect ATF Box Only to your USB Port
8. Install the Correct Drivers

************************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE
************************************************
When press restore box get this
Advance-Box Secure AES-128 Channel


Open Port Success...

Error return code 6

Error return code

Elapsed time = 00:00:00