ATF Nitro Auto update problem - GSM-Forum

darmobiles · 04-05-2016, 17:05

Hello Sir i download latest version 12.60 and want to update auto but when i press "check software update" nothing change on software and when i restore box, error server shows
please guide me what to do
thanks

Smart-gsm · 04-05-2016, 17:17

atf server are updating ... will be online in 24-48hours dns propagation

darmobiles · 04-05-2016, 17:30

ok but i was trying to update for last 1 week

darmobiles · 08-08-2016, 15:21

i buy new ATF box (used)
need to update box firmware but same error " server error"

GSM KPK · 08-08-2016, 15:39

my turbo box infineon all mobile flashing error - other box flashing mobile 100% ok

atf box 1 error

Data Sections : 04
Current File : rm837__03.32.mcusw
Compile Name: rm837__03.32.mcusw_ebl_psi.fls
Image Type : Main Firmware
Data Size : 27266440 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 31B4
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02
FIRMWARE Erase Block: 0x40040000~0x4005FFFE
Start Erasing...
Erasing Please Wait...
ERROR: Erasing Failed

2 error

Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
ERROR: PBL was NOT Accepted

3 error

Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
ERROR: ReqFlashId FAILED A

other box flashing Done

Insert USB Cable to Switched OFF Phone and Power ON
IF_USB: XGOLDxxx
IF_SBL: XGOLD213, Ok
IF_EBL: Quantum_Bootloader_10.50_M1S1 10.50, Mode: CC
FL_ID : EC001230, Samsung K5N1258ACM 512Mb
MCU FLASH BUNDLE: rm837__03.32.mcusw
Flash File: rm837__03.32.mcusw_ebl_psi.fls
Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00
Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00
Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00
Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00
Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:00
Write Area: 0x40060000 - 0x4015FFFE, Written: 00:01
Erase Area: 0x40280000 - 0x41BBFFFE, Erased: 00:54
Write Area: 0x40280000 - 0x41B3FFFE, Written: 00:31
Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00
PPM FLASH BUNDLE: rm837__03.32.ppm_m2
Flash File: package_m2.ppm_ebl_psi.fls
Erase Area: 0x41BC0000 - 0x421BFFFE, Erased: 00:08
Write Area: 0x41BC0000 - 0x41EC7122, Written: 00:04
CNT FLASH BUNDLE: rm837__03.32.image_m2_059P7C1
Flash File: package_m2_059P7C1.image.fls
Erase Area: 0x421C0000 - 0x43E1FFFE, Erased: 01:07
Write Area: 0x421C0000 - 0x430DFFFE, Written: 00:19
Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:02
Flashing Done: 03:14
ShutDown Done

darmobiles · 08-11-2016, 16:50

still server error
i need to update box, box is not working without update.

allumts · 08-14-2016, 17:13

Quote:

Originally Posted by darmobiles

still server error
i need to update box, box is not working without update.

Hello, read Sticky Threads next time.

Here my Full solution Tested and working 100%:

http://forum.gsmhosting.com/vbb/f609...-here-2090299/

Br
allumts

darmobiles · 08-21-2016, 09:03

Quote:

Originally Posted by allumts

Hello, read Sticky Threads next time.

Here my Full solution Tested and working 100%:

http://forum.gsmhosting.com/vbb/f609...-here-2090299/

Br
allumts

Thanks for solution.
problem solved.
realy we are lazy users

04-05-2016, 17:05	#1 (permalink)
darmobiles No Life Poster Join Date: Oct 2011 Location: Punjab Posts: 1,385 Member: 1675429 Status: Offline Sonork: 1609235 Thanks Meter: 174	ATF Nitro Auto update problem Hello Sir i download latest version 12.60 and want to update auto but when i press "check software update" nothing change on software and when i restore box, error server shows please guide me what to do thanks

08-08-2016, 15:21	#4 (permalink)
darmobiles No Life Poster Join Date: Oct 2011 Location: Punjab Posts: 1,385 Member: 1675429 Status: Offline Sonork: 1609235 Thanks Meter: 174	i buy new ATF box (used) need to update box firmware but same error " server error" Last edited by darmobiles; 08-08-2016 at 15:28.

04-05-2016, 17:17	#2 (permalink)
Smart-gsm No Life Poster Join Date: Jan 2010 Location: China Posts: 1,459 Member: 1222089 Status: Offline Sonork: 100.1583019 Thanks Meter: 2,688	atf server are updating ... will be online in 24-48hours dns propagation

04-05-2016, 17:30	#3 (permalink)
darmobiles No Life Poster Join Date: Oct 2011 Location: Punjab Posts: 1,385 Member: 1675429 Status: Offline Sonork: 1609235 Thanks Meter: 174	ok but i was trying to update for last 1 week

08-08-2016, 15:39	#5 (permalink)
GSM KPK No Life Poster Join Date: Apr 2014 Location: Charsadda kpk Age: 41 Posts: 559 Member: 2166444 Status: Offline Thanks Meter: 298	my turbo box infineon all mobile flashing error - other box flashing mobile 100% ok atf box 1 error Data Sections : 04 Current File : rm837__03.32.mcusw Compile Name: rm837__03.32.mcusw_ebl_psi.fls Image Type : Main Firmware Data Size : 27266440 Bytes Sending Certificate Block FIRMWARE Certificate Block Sent Successfully... Processing Section 01 FIRMWARE Erase Block: 0x40000000~0x4001FFFE Start Erasing... Erasing Please Wait... Block Erase Done... Preparing Data Blocks... Data Size: 131072 bytes Data Checksum: 31B4 Uploading Data Blocks to phone... Block Write Successful... FIRMWARE Data Blocks uploaded to phone... Processing Section 02 FIRMWARE Erase Block: 0x40040000~0x4005FFFE Start Erasing... Erasing Please Wait... ERROR: Erasing Failed 2 error Infineon USB Boot: F00A1FB300020303010100FF Sending PBL... ERROR: PBL was NOT Accepted 3 error Infineon USB Boot: F00A1FB300020303010100FF Sending PBL... PBL Successfully Sent... Sending SBL... SBL Successfully Sent... Setting Transmission Speed Done... ERROR: ReqFlashId FAILED A other box flashing Done Insert USB Cable to Switched OFF Phone and Power ON IF_USB: XGOLDxxx IF_SBL: XGOLD213, Ok IF_EBL: Quantum_Bootloader_10.50_M1S1 10.50, Mode: CC FL_ID : EC001230, Samsung K5N1258ACM 512Mb MCU FLASH BUNDLE: rm837__03.32.mcusw Flash File: rm837__03.32.mcusw_ebl_psi.fls Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00 Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00 Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00 Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00 Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:00 Write Area: 0x40060000 - 0x4015FFFE, Written: 00:01 Erase Area: 0x40280000 - 0x41BBFFFE, Erased: 00:54 Write Area: 0x40280000 - 0x41B3FFFE, Written: 00:31 Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00 PPM FLASH BUNDLE: rm837__03.32.ppm_m2 Flash File: package_m2.ppm_ebl_psi.fls Erase Area: 0x41BC0000 - 0x421BFFFE, Erased: 00:08 Write Area: 0x41BC0000 - 0x41EC7122, Written: 00:04 CNT FLASH BUNDLE: rm837__03.32.image_m2_059P7C1 Flash File: package_m2_059P7C1.image.fls Erase Area: 0x421C0000 - 0x43E1FFFE, Erased: 01:07 Write Area: 0x421C0000 - 0x430DFFFE, Written: 00:19 Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:02 Flashing Done: 03:14 ShutDown Done

08-11-2016, 16:50	#6 (permalink)
darmobiles No Life Poster Join Date: Oct 2011 Location: Punjab Posts: 1,385 Member: 1675429 Status: Offline Sonork: 1609235 Thanks Meter: 174	still server error i need to update box, box is not working without update.