Nokia XL Dead After flash This phone was this product code
After flash this version (RM1030_V2_1.2.3.21) now only detect zsus driver. Can i repair it with atf jtag pls help. |
Here is flashing log............. ================================================== ==== 17:16:26 : Nokia Android Firmware Flasher 17:16:26 : ================================================== ==== 17:16:26 : 17:16:26 : If the Phone is ALIVE 17:16:26 : 1. Power On the Phone and Connect it to the USB Port 17:16:26 : 17:16:26 : If the Phone is DEAD 17:16:26 : 1. Press and Hold the VOLUME DOWN button 17:16:26 : 2. Connect it to the USB Port while still Pressing 17:16:26 : the VOLUME DOWN button 17:16:26 : 3. Continue to Press the VOLUME DOWN button for 15 17:16:26 : more seconds 17:16:26 : ================================================== ==== 17:16:26 : 17:17:29 : 17:17:29 : ================================================== ==== 17:17:29 : ERROR: Active Phone Handle was NOT DETECTED 17:17:29 : ================================================== ==== 17:17:29 : 17:17:29 : 1. Make Sure USB Drivers are Installed! 17:17:29 : 17:17:29 : 2. Make Sure Battery is Fully Charged! 17:17:29 : ================================================== ==== 17:18:35 : 17:18:35 : ================================================== ==== 17:18:35 : Flash File Checksum Verification 17:18:35 : ================================================== ==== 17:18:35 : RM1030_V2_1.2.3.21_boot.img: CHECKSUM PASSED 17:18:35 : RM1030_V2_1.2.3.21_cache.img: CHECKSUM PASSED 17:18:35 : RM1030_V2_1.2.3.21_emmc_appsboot.mbn: CHECKSUM PASSED 17:18:35 : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn: CHECKSUM PASSED 17:18:35 : RM1030_V2_1.2.3.21_persist.img: CHECKSUM PASSED 17:18:35 : RM1030_V2_1.2.3.21_recovery.img: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_system.img: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_userdata.img: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_oemsblhd.mbn: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_oemsbl.mbn: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_qcsbl.mbn: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_fat.bin: CHECKSUM PASSED 17:18:37 : RM1030_V2_1.2.3.21_udisk.bin: CHECKSUM PASSED 17:18:38 : RM1030_V2_1.2.3.21_preload.img: CHECKSUM PASSED 17:18:38 : RM1030_V2_1.2.3.21_059W166_EURO_PL_V2_variant.img: CHECKSUM PASSED 17:18:38 : ================================================== ==== 17:18:38 : Verification Done... 17:18:41 : 17:18:41 : Flash File is for REVISION 2 Phone... 17:18:41 : 17:18:41 : Nokia Android Phone Flashing Started 17:18:41 : 17:18:41 : 17:18:41 : ================================================== ==== 17:18:41 : Nokia Android Firmware Flasher 17:18:41 : ================================================== ==== 17:18:41 : 17:18:41 : If the Phone is ALIVE 17:18:41 : 1. Power On the Phone and Connect it to the USB Port 17:18:41 : 17:18:41 : If the Phone is DEAD 17:18:41 : 1. Press and Hold the VOLUME DOWN button 17:18:41 : 2. Connect it to the USB Port while still Pressing 17:18:41 : the VOLUME DOWN button 17:18:41 : 3. Continue to Press the VOLUME DOWN button for 15 17:18:41 : more seconds 17:18:41 : ================================================== ==== 17:18:41 : 17:19:05 : 17:19:05 : Processing QCSBL CONFIG 17:19:05 : Initiating File Download... 17:19:05 : Start Sending Blocks... 17:19:05 : All Blocks Sent: OK 17:19:05 : Writing to eMMC... 17:19:05 : All Blocks Written: OK 17:19:05 : Processing QCSBL 17:19:05 : Initiating File Download... 17:19:05 : Start Sending Blocks... 17:19:05 : All Blocks Sent: OK 17:19:05 : Writing to eMMC... 17:19:05 : All Blocks Written: OK 17:19:05 : Processing MODEM 17:19:05 : Initiating File Download... 17:19:05 : Start Sending Blocks... 17:19:07 : All Blocks Sent: OK 17:19:07 : Writing to eMMC... 17:19:11 : All Blocks Written: OK 17:19:11 : Processing OEMSBL HEADER 17:19:11 : Initiating File Download... 17:19:11 : Start Sending Blocks... 17:19:11 : All Blocks Sent: OK 17:19:11 : Writing to eMMC... 17:19:11 : All Blocks Written: OK 17:19:11 : Processing OEMSBL 17:19:11 : Initiating File Download... 17:19:11 : Start Sending Blocks... 17:19:11 : All Blocks Sent: OK 17:19:11 : Writing to eMMC... 17:19:11 : All Blocks Written: OK 17:19:11 : Processing APPSBOOT HEADER 17:19:11 : Initiating File Download... 17:19:11 : Start Sending Blocks... 17:19:11 : All Blocks Sent: OK 17:19:11 : Writing to eMMC... 17:19:11 : All Blocks Written: OK 17:19:11 : Processing APPSBOOT 17:19:11 : Initiating File Download... 17:19:11 : Start Sending Blocks... 17:19:11 : All Blocks Sent: OK 17:19:11 : Writing to eMMC... 17:19:11 : All Blocks Written: OK 17:19:11 : Processing BOOT 17:19:11 : Initiating File Download... 17:19:11 : Start Sending Blocks... 17:19:12 : All Blocks Sent: OK 17:19:12 : Writing to eMMC... 17:19:13 : All Blocks Written: OK 17:19:13 : Processing RECOVERY 17:19:13 : Initiating File Download... 17:19:13 : Start Sending Blocks... 17:19:13 : All Blocks Sent: OK 17:19:13 : Writing to eMMC... 17:19:14 : All Blocks Written: OK 17:19:14 : Processing PERSIST 17:19:14 : Initiating File Download... 17:19:14 : Start Sending Blocks... 17:19:15 : All Blocks Sent: OK 17:19:15 : Writing to eMMC... 17:19:16 : All Blocks Written: OK 17:19:16 : Processing SYSTEM 17:19:16 : Initiating File Download... 17:19:16 : Start Sending Blocks... 17:20:02 : All Blocks Sent: OK 17:20:02 : Writing to eMMC... 17:21:20 : All Blocks Written: OK 17:21:20 : Processing VARIANT 17:21:20 : Initiating File Download... 17:21:20 : Start Sending Blocks... 17:21:22 : All Blocks Sent: OK 17:21:22 : Writing to eMMC... 17:21:24 : All Blocks Written: OK 17:21:24 : Processing CACHE 17:21:24 : Initiating File Download... 17:21:24 : Start Sending Blocks... 17:21:25 : All Blocks Sent: OK 17:21:25 : Writing to eMMC... 17:21:27 : All Blocks Written: OK 17:21:27 : Processing USERDATA 17:21:27 : Initiating File Download... 17:21:27 : Start Sending Blocks... 17:21:35 : All Blocks Sent: OK 17:21:35 : Writing to eMMC... 17:21:41 : All Blocks Written: OK 17:21:41 : Processing UDISK 17:21:41 : Initiating File Download... 17:21:41 : Start Sending Blocks... 17:21:52 : All Blocks Sent: OK 17:21:52 : Writing to eMMC... 17:21:59 : All Blocks Written: OK 17:21:59 : Processing PRELOAD 17:22:00 : Initiating File Download... 17:22:00 : Start Sending Blocks... 17:23:57 : All Blocks Sent: OK 17:23:57 : Writing to eMMC... 17:25:27 : ERROR: Communication Failure! |
ur handset is v1 and u flashed v2 on it thereshould he is dead now jitag with atf and another then reflash v1 |
Which file i use this phone there are two file for jtag NOKIA_XL_V2_RM-1030_FULL_BOOT_1.1.2.20.afp NOKIA_XL_V2_RM-1030_FULL_BOOT_1.2.3.21.afp |
download this file and try it NOKIA_XL_RM-1030_FULL_BOOT_1.1.0.6.afp |
|
All times are GMT +1. The time now is 17:19. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -