samsung i9100 boot repair error.
 

i soldring test point (data0-gnd-cmd-clk)..

http://imageshack.com/a/img673/7968/YdhQNp.jpg



then i press scan emmc but i got error...


http://imageshack.com/a/img537/7043/Yf79cE.png



plz any help..thxxx

First of all chech pinouts
http://forum.gsmhosting.com/vbb/f672...inout-1750686/
in i9100 90% emmc firmware is damage
you cant detect emmc if firmware is damage
in this state u can detect emmc via NAND_TP
fr reair firmware and write boot
check this post for more detail

http://forum.gsmhosting.com/vbb/f609...m-n-o-1936304/

try to solder two resistor like this
http://forum.gsmhosting.com/vbb/f609...nside-1835228/

without atf jtag activet.. i use emmc tool in atf box?


http://imageshack.com/a/img540/2109/6xmMSS.png

What is emmc cable used my fryend. Verifiy all wires. If not have emmc cable, use external power supply for vcc and vccq.

this operation need jtag activate or not plz ansss......

sorry for qustion ans is here......ATF Plus eMMC Tool 4.0 (PRO)

Introducing ATF Drive !!! 100% FREE FOR ALL ATF BOX USERS

D.R.I.V.E. = Data Recovery Interface Via EMMC