HTC Magic (sapphire) boot repair - GSM-Forum

eliberatoro · 12-13-2010, 11:33

Hi !
I have a HTC Magic with wrongly flashed boot. The phone is 32A and flashed with 32B.

Now I rewited the boot with SMTi but the phone freezes at startup logo (Vodafone)

The phone has initialy :
MODEL: HTC Magic / sapphire (32A)
CID: VODAPP25
BOOT LOADER: 1.33.0010

Flashed wrongly with: hboot_1.33.0004_32B
(freezes at startup logo - logo is fuzzy)

Flashed with SMTi/JRT:

*****************************************
File: HTC Spphire(myTouch 3G, Magic) RBR(32A_6.35.10.18) + SBL(hboot-1.76.2007)(V2).fqr
Modele: HTC Sapphire
Write Boot (FQR):

Found Target, Target Info:
- HW_REVISION_NUMBER: 0x301700E1

- MCP NAND ID: 2C BC
- Chip: MICRON MT29F4G16ABCHC 4096 Mbit

Flash Map:
- Block Count: 0x1000
- Block Size: 0x40 pages
- Page Size: 0x800 bytes
- Total Page Size: 0x840

- Write QCSBL ...Done!
- Write OEMSBL1 ...Done!
- Write OEMSBL2 ...Done!
- Write APPSBL ...Done!
- Write MIBIB ...Done!
*****************************************
Freezes at startup logo - (logo is ok)
What next ? What can I do ?

The phone not recognized by USB, and no response for (back+pwrON)

Please help.

gsminfo · 12-13-2010, 14:27

From where you have this details ???

Code:

The phone has initialy :
MODEL: HTC Magic / sapphire (32A)
CID: VODAPP25
BOOT LOADER: 1.33.0010

Bootloader file from support section working 100% .
Maybe you have problem on other problem . Maybe its no boot wrong ...

SMT

eliberatoro · 12-13-2010, 14:55

The phone was working 100% before boot change.

Can I do anything wrong in the boot write process ?

What is the differenc between JTAG I/O anf JTAG DCC ?

I made first "Erase Boot" and after that "Write boot FQR".

If the boot is ok the phone should enter in hboot menu or usb flash.

gsminfo · 12-13-2010, 15:34

I do not understand why you make repair boot if boot working Ok.
I do not understand why you dont make any backup before if your phone working Ok .

SMT

eliberatoro · 12-13-2010, 15:50

Let get step by step.
First the phone was ok and customer bring for unlock.

With a "XYZ" box I made a wrongly unlock procedure. (changed boot from 32A to 32B) - at this point phone is dead. (just fuzzy vodafone logo on screen)

With the SMTi box I want to write a good boot to the phone.
Boot written but the pone freez on startup.

gsminfo · 12-13-2010, 15:53

Quote:

Originally Posted by eliberatoro

Let get step by step.
First the phone was ok and customer bring for unlock.

With a "XYZ" box I made a wrongly unlock procedure. (changed boot from 32A to 32B) - at this point phone is dead. (just fuzzy vodafone logo on screen)

With the SMTi box I want to write a good boot to the phone.
Boot written but the pone freez on startup.

If phone after unlock have bad boot from where you take this info :

Code:

The phone has initialy :
MODEL: HTC Magic / sapphire (32A)
CID: VODAPP25
BOOT LOADER: 1.33.0010

Its no clear for me ...

SMT

eliberatoro · 12-13-2010, 15:57

Quote:

Originally Posted by gsminfo

If phone after unlock have bad boot from where you take this info :

Code:

The phone has initialy :
MODEL: HTC Magic / sapphire (32A)
CID: VODAPP25
BOOT LOADER: 1.33.0010

Its no clear for me ...

SMT

That was the first "Read Info" with the other (xyz) box.

hongphuoc · 12-14-2010, 10:02

Found Target, Target Info:
- HW_REVISION_NUMBER: 0x301700E1
- MCP NAND ID: 2C BC
- Chip: MICRON MT29F4G16ABCHC 4096 Mbit
Flash Map:
- Block Count: 0x1000
- Block Size: 0x40 pages
- Page Size: 0x800 bytes
- Total Page Size: 0x840
- Write QCSBL ...Done!
- Write OEMSBL1 ...Done!
- Write OEMSBL2 ...Done!
- Write APPSBL ...Done!
- Write MIBIB ...Done!

The phone not recognized by USB, and no response for (back+pwrON)

hongphuoc · 12-14-2010, 10:15

Repair HTC Sapp100 by SMTI not OK

Quote:

Originally Posted by hongphuoc

Found Target, Target Info:
- HW_REVISION_NUMBER: 0x301700E1
- MCP NAND ID: 2C BC
- Chip: MICRON MT29F4G16ABCHC 4096 Mbit
Flash Map:
- Block Count: 0x1000
- Block Size: 0x40 pages
- Page Size: 0x800 bytes
- Total Page Size: 0x840
- Write QCSBL ...Done!
- Write OEMSBL1 ...Done!
- Write OEMSBL2 ...Done!
- Write APPSBL ...Done!
- Write MIBIB ...Done!
The phone not recognized by USB, and no response for (back+pwrON)

[IMG]http://ca8.*****.com/17.848.22240872.Ejv0/htc.jpg[/IMG]

eliberatoro · 12-14-2010, 10:52

It seems to be the same problem.

What boot has your phone originaly ?

eliberatoro · 12-14-2010, 12:02

@gsminfo !

Could you please explain step by step the boot change procedure for this type of CPU ?

What jtag mode I have to select ? It need to be erased or repowered after erase ?

gsminfo · 12-14-2010, 15:06

Quote:

Originally Posted by eliberatoro

@gsminfo !

Could you please explain step by step the boot change procedure for this type of CPU ?

What jtag mode I have to select ? It need to be erased or repowered after erase ?

after selected model type exe make auto selected jtag procedure
make boot erase
select use start init init
and write boot

SMT

eliberatoro · 12-15-2010, 09:40

Quote:

Originally Posted by hongphuoc

Found Target, Target Info:
- HW_REVISION_NUMBER: 0x301700E1
- MCP NAND ID: 2C BC
- Chip: MICRON MT29F4G16ABCHC 4096 Mbit
Flash Map:
- Block Count: 0x1000
- Block Size: 0x40 pages
- Page Size: 0x800 bytes
- Total Page Size: 0x840
- Write QCSBL ...Done!
- Write OEMSBL1 ...Done!
- Write OEMSBL2 ...Done!
- Write APPSBL ...Done!
- Write MIBIB ...Done!

The phone not recognized by USB, and no response for (back+pwrON)

Hi
I solved my phone writing the "G2_FactoryBootRepair_SPL-HBOOT-1.33.2005_ENG S-OFF.sbf" file in it (you can get this file from support for 32B type) than you will have the HBOOT menu (Back+PWRON) and you can flash from USB.

I mention here that my phone has MSM7200 CPU.

12-13-2010, 11:33	#1 (permalink)
eliberatoro Freak Poster Join Date: Mar 2008 Posts: 127 Member: 722598 Status: Offline Thanks Meter: 6	HTC Magic (sapphire) boot repair Hi ! I have a HTC Magic with wrongly flashed boot. The phone is 32A and flashed with 32B. Now I rewited the boot with SMTi but the phone freezes at startup logo (Vodafone) The phone has initialy : MODEL: HTC Magic / sapphire (32A) CID: VODAPP25 BOOT LOADER: 1.33.0010 Flashed wrongly with: hboot_1.33.0004_32B (freezes at startup logo - logo is fuzzy) Flashed with SMTi/JRT: *************************************** File: HTC Spphire(myTouch 3G, Magic) RBR(32A_6.35.10.18) + SBL(hboot-1.76.2007)(V2).fqr Modele: HTC Sapphire Write Boot (FQR): Found Target, Target Info: - HW_REVISION_NUMBER: 0x301700E1 - MCP NAND ID: 2C BC - Chip: MICRON MT29F4G16ABCHC 4096 Mbit Flash Map: - Block Count: 0x1000 - Block Size: 0x40 pages - Page Size: 0x800 bytes - Total Page Size: 0x840 - Write QCSBL ...Done! - Write OEMSBL1 ...Done! - Write OEMSBL2 ...Done! - Write APPSBL ...Done! - Write MIBIB ...Done! *************************************** Freezes at startup logo - (logo is ok) What next ? What can I do ? The phone not recognized by USB, and no response for (back+pwrON) Please help.

12-13-2010, 14:27	#2 (permalink)
gsminfo No Life Poster Join Date: Mar 2003 Location: Poland Age: 53 Posts: 5,680 Member: 23714 Status: Offline Thanks Meter: 18,769	From where you have this details ??? Code: The phone has initialy : MODEL: HTC Magic / sapphire (32A) CID: VODAPP25 BOOT LOADER: 1.33.0010 Bootloader file from support section working 100% . Maybe you have problem on other problem . Maybe its no boot wrong ... SMT

12-14-2010, 10:02	#8 (permalink)
hongphuoc Junior Member Join Date: Jul 2006 Posts: 6 Member: 316200 Status: Offline Thanks Meter: 0	Repair HTC Sapp100 by SMTI not OK Found Target, Target Info: - HW_REVISION_NUMBER: 0x301700E1 - MCP NAND ID: 2C BC - Chip: MICRON MT29F4G16ABCHC 4096 Mbit Flash Map: - Block Count: 0x1000 - Block Size: 0x40 pages - Page Size: 0x800 bytes - Total Page Size: 0x840 - Write QCSBL ...Done! - Write OEMSBL1 ...Done! - Write OEMSBL2 ...Done! - Write APPSBL ...Done! - Write MIBIB ...Done! The phone not recognized by USB, and no response for (back+pwrON)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia "Contact Service" Repairer	Dirk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	10-04-2011 05:45
Contact Service Repairer 1.2 by Bartek	Allen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-23-2011 09:00
magic codes	Touch_Tone	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	16	07-29-2006 23:00
Phone not respond! (Load boot data) Need a help !	SashaM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-23-2001 02:10
New!! Nokia Flash Checksum And Contact Service Repair	HookerGsM	Main Sales Section	0	01-02-2001 10:12

12-13-2010, 14:55	#3 (permalink)
eliberatoro Freak Poster Join Date: Mar 2008 Posts: 127 Member: 722598 Status: Offline Thanks Meter: 6	The phone was working 100% before boot change. Can I do anything wrong in the boot write process ? What is the differenc between JTAG I/O anf JTAG DCC ? I made first "Erase Boot" and after that "Write boot FQR". If the boot is ok the phone should enter in hboot menu or usb flash.

12-13-2010, 15:34	#4 (permalink)
gsminfo No Life Poster Join Date: Mar 2003 Location: Poland Age: 53 Posts: 5,680 Member: 23714 Status: Offline Thanks Meter: 18,769	I do not understand why you make repair boot if boot working Ok. I do not understand why you dont make any backup before if your phone working Ok . SMT

12-13-2010, 15:50	#5 (permalink)
eliberatoro Freak Poster Join Date: Mar 2008 Posts: 127 Member: 722598 Status: Offline Thanks Meter: 6	Let get step by step. First the phone was ok and customer bring for unlock. With a "XYZ" box I made a wrongly unlock procedure. (changed boot from 32A to 32B) - at this point phone is dead. (just fuzzy vodafone logo on screen) With the SMTi box I want to write a good boot to the phone. Boot written but the pone freez on startup.

12-14-2010, 10:52	#10 (permalink)
eliberatoro Freak Poster Join Date: Mar 2008 Posts: 127 Member: 722598 Status: Offline Thanks Meter: 6	It seems to be the same problem. What boot has your phone originaly ?

12-14-2010, 12:02	#11 (permalink)
eliberatoro Freak Poster Join Date: Mar 2008 Posts: 127 Member: 722598 Status: Offline Thanks Meter: 6	@gsminfo ! Could you please explain step by step the boot change procedure for this type of CPU ? What jtag mode I have to select ? It need to be erased or repowered after erase ?