iPad Pro 10.5 a1709 after replace display auto-restart every 2.40min - GSM-Forum

eminemjon · 04-29-2020, 20:26

iPad Pro 10.5 a1709 after replace display auto-restart every 2.40min. Please help me

P3T3 · 05-08-2020, 21:29

Same issue, problem is one of the digitiser filters/resistor has ****n... My iPad fine in standby but not when using it it restarts. Need to work out the ****n point!

HDccam · 05-27-2020, 08:19

Quote:

Originally Posted by eminemjon

iPad Pro 10.5 a1709 after replace display auto-restart every 2.40min. Please help me

Sounds like the ipad can not read the battery status. Check if you can read battery info, Check the small battery connector pins and screw pressure.

P3T3 · 06-24-2020, 10:15

Quote:

Originally Posted by HDccam

Sounds like the ipad can not read the battery status. Check if you can read battery info, Check the small battery connector pins and screw pressure.

My issue is not battery, put the logic board in a different housing and still the same.

P3T3 · 07-01-2020, 21:52

Ok so after testing it was my screen, brand new screen did this. I got another working iPad and tested the screen, restarted every few min.
I have ordered a new screen, I’m hopping will be hear any day but just because it’s a new screen it could still be issue, nearly used a good iPad for parts because of this so be careful.
Just make shore you always disconnect battery before removing screen and that way if you get a faulty screen you will know 99% it’s the screen!

P3T3 · 07-09-2020, 19:47

New screen fixes this 100%, tested!
I noticed new screen dos not try to pair True Tone (no option) where as restarting screen had True Tone setting and was not programmed or paired with LB so I’m thinking this is the issue?!

04-29-2020, 20:26	#1 (permalink)
eminemjon Crazy Poster Join Date: Apr 2012 Location: Russia/Moscow Posts: 56 Member: 1748637 Status: Offline Thanks Meter: 5	iPad Pro 10.5 a1709 after replace display auto-restart every 2.40min iPad Pro 10.5 a1709 after replace display auto-restart every 2.40min. Please help me

05-08-2020, 21:29	#2 (permalink)
P3T3 Freak Poster Join Date: Oct 2014 Posts: 384 Member: 2277735 Status: Offline Thanks Meter: 215	Same issue, problem is one of the digitiser filters/resistor has **n... My iPad fine in standby but not when using it it restarts. Need to work out the **n point!

07-01-2020, 21:52	#5 (permalink)
P3T3 Freak Poster Join Date: Oct 2014 Posts: 384 Member: 2277735 Status: Offline Thanks Meter: 215	Ok so after testing it was my screen, brand new screen did this. I got another working iPad and tested the screen, restarted every few min. I have ordered a new screen, I’m hopping will be hear any day but just because it’s a new screen it could still be issue, nearly used a good iPad for parts because of this so be careful. Just make shore you always disconnect battery before removing screen and that way if you get a faulty screen you will know 99% it’s the screen!

07-09-2020, 19:47	#6 (permalink)
P3T3 Freak Poster Join Date: Oct 2014 Posts: 384 Member: 2277735 Status: Offline Thanks Meter: 215	New screen fixes this 100%, tested! I noticed new screen dos not try to pair True Tone (no option) where as restarting screen had True Tone setting and was not programmed or paired with LB so I’m thinking this is the issue?!