iPhone 1.2.3.4 all hardware problem post here.i can help u.

[admtehnosrl]

Originally Posted by kukurikoo

did you try to replace the batt?

yes, but same problem

[zag]

Apparently the creator of the theme was kidnapped by the MAC to give! Virtually no repairs

Greetings
zag

[Wideon2000]

3g 16gig

error 23 on restore

other files error 1600


dfu and non dfu will not restore

[tipurus]

I change lcd iphone4, everything is woking fine but when i pick up phone for hearing lcd should off mode but it is not working. change flat cable which is comming with on off switch and lcd ic on off. can any body help me to solved such problem. Bucause when lcd working with active mode connection can detach during call. Thank u every boby

[hassanzubair]

hello all: Please any body help me i have iphone 4g and 3g. dead due to bad charger. now my both set is dead. if any body have solution kindly help me

[zhanglei5556]

Originally Posted by bmj

hi
I have an iphone 3g No Service sometimes it is the networks for 3G and after a half hour is more
and another 3gs no service

plz help

hi sir.which one is your phone?3G or 3gs? 2G or 3G part not work?

[zhanglei5556]

Originally Posted by ehab tabshy

yup i have same problem iphone 3g unlocked have network problem showing no service or sometimes 1 signal show

pls check carrier can show or not?If the phone have unlocked.but it can show carrier when u inset a sim card.

[zhanglei5556]

Originally Posted by mostafa_aqsa

hi i have iphone 4 16g no wifi no sim card detecting no imei no iccid can u help me pls

check baseband VCC.CPU and FLASH ic need a 1.8V,and U11 can send a 3V and 2.8V to phone part.i think that U11 problem perhaps.

[zhanglei5556]

Originally Posted by Wideon2000

error 23 on restore stock and custom

hi friend.that hardware problem. phone part not work.i think CPU and FLASH not got 1.8V .pls check.good luck to u!~

[zhanglei5556]

Originally Posted by hossain ahmed

i have 3gs apple logo hang usb not responding only show logo when i connect . i cleen usb io but still samme thinks can u have any idea ? please

first i think it's software problem.pls check your connecter.If not ok.that's CPU and RAM problem of PDA part.good luck to u sir!~

[zhanglei5556]

Originally Posted by zag

I tried everything posted on the Internet always at the end does not finish loading the software and appears in itunes 1002 Error

hi bro.1002 is hardware problem. phone part not work.not software problem.

[zhanglei5556]

Originally Posted by AutoDelete

Hi Mr.TS where r u?
i have some issue with iphone 3gs, still DFU Mode. can u give me some advice?

If u cann't out DFU mode.pls check CPU of PDA part.

[zhanglei5556]

Originally Posted by gerard[virus]

par iphone 3gs white screen ...taz error 29 nabasa....






need reply

3S error 29 is battery problem.change it is ok.sure!

[zhanglei5556]

Originally Posted by tipurus

I change lcd iphone4, everything is woking fine but when i pick up phone for hearing lcd should off mode but it is not working. change flat cable which is comming with on off switch and lcd ic on off. can any body help me to solved such problem. Bucause when lcd working with active mode connection can detach during call. Thank u every boby

add a receiver cover all is ok.i think your phone made in after 44week。and u have change a white LCD yes?

[zhanglei5556]

Originally Posted by hassanzubair

hello all: Please any body help me i have iphone 4g and 3g. dead due to bad charger. now my both set is dead. if any body have solution kindly help me

hi bro,i think your phone is hardware problem.all is power IC problem.change it first.