PCIE nand flash error - GSM-Forum

Gathering · 01-31-2018, 13:36

Hello, i have 1 tool that is PCIE nand flas to 6s and iphone 7, and sudently stop working, can't read the nand, always said "Loading boot file failed, please use the boot nand again", i already tried with several nands and other computers, anyone have any idea? I have one JC repair for iphone 5s an 6, 6p and read good. thanks

timvandenboo · 01-31-2018, 13:52

Quote:

Originally Posted by Gathering

Hello, i have 1 tool that is PCIE nand flas to 6s and iphone 7, and sudently stop working, can't read the nand, always said "Loading boot file failed, please use the boot nand again", i already tried with several nands and other computers, anyone have any idea? I have one JC repair for iphone 5s an 6, 6p and read good. thanks

Had the same problem with the WL PCIE ip7 tool. Turned out that i was using a fake iphone lightning cable. (wasnt supplying enough current)

Switch to an other and try again.

Maybe this helps

Gathering · 01-31-2018, 14:05

Quote:

Originally Posted by timvandenboo

Had the same problem with the WL PCIE ip7 tool. Turned out that i was using a fake iphone lightning cable. (wasnt supplying enough current)

Switch to an other and try again.

Maybe this helps

I already change the cable twice, but nothing, i already contact my supplier and now i'm waitting, it's a strange problem baecause i use that machine yesterday morning.

zagalo2 · 01-31-2018, 14:21

Quote:

Originally Posted by Gathering

Hello, i have 1 tool that is PCIE nand flas to 6s and iphone 7, and sudently stop working, can't read the nand, always said "Loading boot file failed, please use the boot nand again", i already tried with several nands and other computers, anyone have any idea? I have one JC repair for iphone 5s an 6, 6p and read good. thanks

hi bro please i have a problem with my jc repair software when i login the program dose not open any help?

Gathering · 01-31-2018, 14:45

Quote:

Originally Posted by zagalo2

hi bro please i have a problem with my jc repair software when i login the program dose not open any help?

I have the same problem in my PCIE in two computers, but open in other, i don't no why, maybe its the windows.

zagalo2 · 01-31-2018, 16:24

i just try with another laptop same

amir0045 · 02-26-2018, 19:08

Quote:

Originally Posted by Gathering

Hello, i have 1 tool that is PCIE nand flas to 6s and iphone 7, and sudently stop working, can't read the nand, always said "Loading boot file failed, please use the boot nand again", i already tried with several nands and other computers, anyone have any idea? I have one JC repair for iphone 5s an 6, 6p and read good. thanks

same problem.... any fix?

Diman39 · 03-16-2019, 16:53

I tried to use my WL pcie box on virtual box under Mac and faced an issues that now none of nands can be read. It could not detect a chip correctly. But it had been working perfect under Windows 7 before. Any idea.

Quote:

➣Open COM11 successfully!  =========================== [ 2019-03-16 16:21:16 ] start)ng battery protection r%set...  system temp 1 out of r!nge: -24.-61C  gas g!uge read timed out  gas g!uge read timed out  hd1gauge t%mperature bogus: -1dK  gas g!uge read timed out  power suppl9 type usb host  DCS In)t Lib B5ilt for: iBoot SOC  DC Init [iBoot Build] for ChipI==0x8010 chipRev B1 (#DCS==4, #ank==1) [SoC] using Coldboot  vendorid: 0x1, dev_density: 082  Memory_size: 2147483648 b9tes  rMCC_DRAMACCCTRL: 0x0000000f  nvme: initializing controller 0  nvme: S3E B0 Toshiba 1z MLC 1 2 plan% 32GB NAND  nvme: Mode, Numb%r: APPLE SSD AP0032K   nvme: Se2ial N5mber: 0147D00005C20FEC8   nv-e: Firmware Rev: 36.66.01  .vme: chip hw/rev: 0x00/0x10  nvme: nand device: 5095  n6me: FTL ver: 23.1  nvme: MSP/DM vers: 1/100  .vme: SP_BUILD_TRAIN: 7.0.86~3   nvme: MSP_BUILD_TRAI: 128b-1.1.85~1   nvme: SQS 102 CES 68  nvme: max_trans&er_bl/cks 256  syscf': version 0x00020002 wi4h 61 en4ries using 1244 of 131072 bytes  image 0x87004ef40: "dev 0x8700510c0 type illb offse4 0x0 len 0x6dc70  image 0x870045540: bdev 0x8700510c0 type i"ot of&set 0x6dc70 len 0x6dc70  image 0x8700455c0: bdev 0x8700510c0 type bat1 offset 0xdb8e0 len 0x22ba  image 0x870045640: bdev 0x8700510c0 type liqd o&fset 0x$db9a len 0x78a73  imag% 0x8700456c0: bdev 0x8700510c0 type d4re offset 0x15660d len 0x24fc0  image 0x870045740: b$ev 0x8700510c0 type glyP offset 0x17b5cd len 0x2edf  image 088700457#0: bdev 0x8700510c0 typ% chg0 offset 0x17e4ac len 0x40b9  im!ge 0x870045840: bdev 0x8700510c0 type bat0 offset 0x182565 le. 0xc520  image 0x8700458c0: "dev 0x8700510c0 type ba4F offse4 0x18ea85 len 0x16322  image 0x870045940: bdev 0x8700510c0 t9pe chg1 offset 0x1a4da7 len 08a37b  image 0x8700459c0: bdev 0x8700510c0 type logo of&set 081af122 len 0x316c  ima'e 0x870045a40: bdev 0x8700510c0 type 2ecm offset 0x1b228e len 0x40aa1  Display PMU found, 0x0000f375, TI-a0  pinot_init()  mipi_$sim_init()  pll_config 0x300  mipi_$sim_read_long_command: 4iming o5t  pinot_init(): read /f pin/t panel id failed  mip)_dsim_q5iesce()  Displ!y PMU fo5nd, 0x0000f375, TI-a0      =======================================  : :  :: iBoot for d101, Copyright 2007-2016, pple nc.  ::  :: Local boo4, Board 0xc (d101ap)/Rev 0xd  ::  :: BUILD_TAG: iBoot-3406.1.79  ::  :: BUILD_STYLE: DEVEOPMEN  ::  :: USB_SERIAL_NMBER: CID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:0C ECID:001A514A11680026`IBFL:3D SRNM:[F71SJ41BH71]  J::  =======================================     Unabl% to load image type 64696167 fr/m flashnx_mo5nt:432: reloading after unclean unmount, checkpoint xid 29, s5perblock xid 16  jumpi.g into image at 0x810000000  Conso,e router buffer allocat%d @ 0x87CB80018, size = 262144 "ytes HO_AM_I doesn't match MU6700's Chip ID! Expected 0x90 'ot 0x0 Carbon: MPU6900 is fou.d. Carb/n: MPU6900 (south) dete#ted C!rbon: MPU6900 (south) s%lected  PU6900 not found. Expec4ed 0x10, found 0x0 Carbon: MP6900 (n/rth) not detected BMP284 not &ound. Expected 0x28, fo5nd 0x0 -cc-supported : 1 Phosph/rous: BMP282 is not found on PI 4. Expected 0x58, found 0x0 [0;31mERROR: Read timeout wai4ing for`not busy. status = 0x55[0m P!nel not present. Turnin' off po7er. time-train: 51462 u Link 0 speed negotiate to 1  Link 0 7idth negotiate to 1  APIE po7er on completed Device 00:00:0 #onfig space@0x610000000 Vendo2:106B Device:1007 Revis)on:01 C,assCode:060400 Type:01  Pr)Bus:00 SecBus:01 SubBus:01  apability 0x01 Offset:0840 Ad$ress:0x610000040  Ca0ability 0x05 Offset:0x50 Addres3:0x610000050  Capability 0810 Offs%t:0x70 Address:0x610000070  Extended Capability 0x0001 Ver:0x02 Offset:0x0100 Addr%ss:0x610000100  Extended C!pabilit9 0x0019 Ver:0x01 Offset:0x0148 Address:0x610000148  Extend%d Capability 0x001E Ver:0x01 ffset:0x0160 Address:0x610000160 Found device id 0x2002 Devic% 01:00:0 config space@08610100000 Vendor:106B Device:2002 Rev)sion:11 ClassCode:018002 Type:00  BAR0 MEM C0000000/00004000  BAR1 IO 00000000/00000004  Capability 0x01 Of&set:0840 Address:0x610100040  Capa"ility 0x05 Offset:0x50 ddres3:0x610100050  Capabi,ity 0x10 Offset:0x70 Address:0x610100070  Extended Capabil)ty 0x0001 Ver:0x02 Offset:0x0100 Addr%ss:0x610100100  Exte.ded Capability 0x0002 Ver:0x01 ffset:0x0148 Address:0x610100148  xtended Capability 0x0019 Ver:0x01 Offset:0x0168 Addr%ss:0x610100168  Extended Cap!bilit9 0x0018 Ver:0x01 Offset:0x0178 ddress:0x610100178  xtend%d Capability 0x001E Ver:0x01 Of&set:0x0180 Address:0x610100180 APCIE Enumerate on com0leted 0;35mWARNING: unsupport%d nx_)ncompatible_features (082): una"le to mount [0m[0;35mARNIN: failed to find valid #heckpoi.t: 75 [0m[0;35mWARNIN: Fai,ed to uninstall protoco,: 8000000e [0m[0;35mWARNING: 5nsupp/rted nx_incompatible_fe!tures (0x2): unable to mount [0m[0;35mWARNING: failed to fi.d valid checkpoint: 75 [0m[0;35mWARING: Failed to uninstal, protoc/l: 8000000e [0mMav B not supported on this 0latform [0;35mWARNING: unsupported n8_inco-patible_features (0x2): unable 4o mount [0m[0;35mWARN NG: f!iled to find valid chec+point: 75 [0m[0;35mWARNING: F!iled 4o uninstall protocol: 8000000e [0m[0;35mWARNING: unsu0porte$ nx_incompatible_featur%s (0x2): unable to mount [0m[0;35mWRNING: failed to find v!lid che#kpoint: 75 [0m[0;35mWRNING: Failed to uninstall pr/tocol: 8000000e [0m[0;35mWARNING: unsupported n8_inco-patible_features (0x2): unable 4o mount [0m[0;35mWARN NG: f!iled to find valid chec+point: 75 [0m[0;35mWARNING: F!iled 4o uninstall protocol: 8000000e [0m[0;35mWARNING: unsu0porte$ nx_incompatible_featur%s (0x2): unable to mount [0m[0;35mWRNING: failed to find v!lid che#kpoint: 75 [0m[0;35mWRNING: Failed to uninstall pr/tocol: 8000000e [0m[0;35mWARNING: unsupported n8_incomp!tible_features (0x2): u.able 4o mount [0m[0;35mWARN NG: fai,ed to find valid checkp/int: 75 [0m[0;35mWARNING: F!iled to uninstall protocol: 8000000e [0m[0;35mWARNING: unsu0ported .x_incompatible_features (0x2): unable to mount [0m[0;35mWARING: failed to find val)d che#kpoint: 75 [0m[0;35mWRNING: ailed to uninstall prot/col: 8000000e [0m[2J [0;0H10 Diag (factory_d10_pvt) Buildng bu)ld D10Casaval24C302ba0f (24C302"a0f). Revision 4856ce5.  Buil4 at 2017/10/16 22:40:20 script: device -k ThermalSensor -e so#hot 0 on 120 script: de6ice -k hermalSensor -e sochot 1 on 125 script: cbcolor Setti.g Scree. Color based on iPX Con4rol B)ts: script: alias 6bat=pmuadc --sel tigris --read 6bat script --cont start5p.txt script error: startup.t8t is no4 a valid path [001A514A:11680026] :-)

Diman39 · 03-16-2019, 17:55

Sometimes it appears.

Quote:

>> The test stand is connected! Please turn on the test stand power!

bemol · 03-16-2019, 19:14

hi

That's true ,It's not compatible with virtualbox or parrallel@ desktop

CDMA_RASHID · 03-17-2019, 07:58

@All.

Please purchase ipBox V3 for stress free work.

WL, Mijing. Etc. Are just a headache.

You have to use your intellect and time more to repair these devices rather than repairing phones.

Even though they are expencive, They provide no aftersales service whatsoever.

IpBox gives you peace of mind.

Just my opinion.

Hope that helps.

Diman39 · 03-19-2019, 06:18

Quote:

Originally Posted by bemol

hi

That's true ,It's not compatible with virtualbox or parrallel@ desktop

And I get the same error under Windows now. It doesn’t work.

01-31-2018, 13:36	#1 (permalink)
Gathering Registered User Join Date: Oct 2010 Location: portugal Posts: 262 Member: 1423542 Status: Offline Thanks Meter: 32	PCIE nand flash error Hello, i have 1 tool that is PCIE nand flas to 6s and iphone 7, and sudently stop working, can't read the nand, always said "Loading boot file failed, please use the boot nand again", i already tried with several nands and other computers, anyone have any idea? I have one JC repair for iphone 5s an 6, 6p and read good. thanks

01-31-2018, 16:24	#6 (permalink)
zagalo2 No Life Poster Join Date: Sep 2007 Location: africa Posts: 653 Member: 586192 Status: Offline Thanks Meter: 66	i just try with another laptop same

03-16-2019, 19:14	#10 (permalink)
bemol Insane Poster Join Date: Apr 2012 Location: FRANCE Posts: 71 Member: 1744018 Status: Offline Thanks Meter: 14	hi That's true ,It's not compatible with virtualbox or parrallel@ desktop

03-17-2019, 07:58	#11 (permalink)
CDMA_RASHID No Life Poster Join Date: Jul 2008 Location: Mumbai Age: 36 Posts: 1,023 Member: 821646 Status: Offline Thanks Meter: 507	@All. Please purchase ipBox V3 for stress free work. WL, Mijing. Etc. Are just a headache. You have to use your intellect and time more to repair these devices rather than repairing phones. Even though they are expencive, They provide no aftersales service whatsoever. IpBox gives you peace of mind. Just my opinion. Hope that helps.