Iphone hardware and software solutions in 24 hrs - Page 5 - GSM-Forum

mobitech servic · 01-15-2009, 14:44

Quote:

Originally Posted by kenani

Hi there,

I bought from a guy new Iphone 3G and jailbraked with quickpwn, after i done that, now i dont have imei nr, iccid, modem firmware and is always searching for network. The strange thing is that when i leave Iphone in cold place then it shows imei nr, iccid , modem firmware and i have network (then it works great) until the temperature it starts rising on the iphone, then again it goes in searching for network.
I tried to restore to different firmwares, i did it more than e 30 times, i tried in windows computers and MAC computers, no success. When is connectes to computer (syncing) or when is charging then nonstop restarts, Im trying to find a solution for this problem!!
Hope to find something that could help to fix my iphone. Your reply on this issue is very welcomed.

Best regards.

this is hardware problem.and liquid damage.open the iphone and clean the top connectors,it will be ok. I repaired 2 iphones with the same problem

dollyb · 01-15-2009, 17:48

hello

i have a 2g iphone, it says no sim. it was broken inside the sim opening tool. a part of them was in the phone. i remove it, but same problem.

thx

wbr

dollyb

s jaya shankar · 01-16-2009, 13:43

hi every body im regular visitor of ur site its superb & ultimate give me some sugession how to rectifi it spk strip is gone i need new strip kindly do the needful

8051 · 01-17-2009, 15:24

Hi,

Everythig is working well problem is only in phone mode (and sms ) when tried to touch sms it returns to main menu same problem when i tried touch numbers 123... ( to make call ) it returns to main menu. In other case the touchscreen works well even numbers.

br

mobitech servic · 01-17-2009, 16:06

Quote:

Originally Posted by s jaya shankar

hi every body im regular visitor of ur site its superb & ultimate give me some sugession how to rectifi it spk strip is gone i need new strip kindly do the needful

u can get the speaker flex in the market ,it is available

mobitech servic · 01-17-2009, 16:13

Quote:

Originally Posted by 8051

Hi,

Everythig is working well problem is only in phone mode (and sms ) when tried to touch sms it returns to main menu same problem when i tried touch numbers 123... ( to make call ) it returns to main menu. In other case the touchscreen works well even numbers.

br

restore the firmware and jailbreak+unlock

mobitech servic · 01-17-2009, 16:17

Quote:

Originally Posted by dollyb

hello

i have a 2g iphone, it says no sim. it was broken inside the sim opening tool. a part of them was in the phone. i remove it, but same problem.

thx

wbr

dollyb

check the hardware there may be some physical damage

iku911 · 01-19-2009, 11:33

hey u all I've Iphone 3G when i restore firmware after compliting loading firmware its show err 1002
; wht should i do u ppl help me plz..

jonny walker · 01-22-2009, 13:11

Hi

I have a Iphone 3G Water damage,
problem is LCD only white screen....component damage

LCD is OK

I need schematic!

Please Help me!!

iku911 · 01-25-2009, 06:47

hey u all ... i've a iphone old version after few mints its restats.. sometime it switch off... any soluation....plz help me..

dubaimobiles · 01-26-2009, 00:53

Hello,

I have an iPhone 3G Factory Unlocked.

Phone works fine, I can get network, recieve calls and sms.

The earphone does not work when a call comes.
Loud Speaker works with iPod and other applications.

Only problem when a call comes, the earphone does not work, when i keep it on loud speaker it does not work. If I attach a headphone still it does not work.

I dont think there is any problem with the earphone, speaker and headphones. It only comes when a call comes are goes.

How do I solve this, someone told me its the boards fault. can you tell me what exactly is wrong with the board and do can I overcome this.

Regards
DM

kenani · 01-26-2009, 11:26

Quote:

Originally Posted by mobitech servic

this is hardware problem.and liquid damage.open the iphone and clean the top connectors,it will be ok. I repaired 2 iphones with the same problem

Ive opened Iphone 3G 8GB and could not se any liquid damage. My problem is that when i start the iphone 3G is always searching for network, there is no Immei,Iccid,Modem firmware.If i leave Iphone3G in to the cold place then it shows network (stops searching) it shows Immei, Iccid and modem firmware and i can make calls, but when i leave the Iphone3G in to a warm room then it goes in to searching for network and there is no immei,iccid, modem firmware. Also when i connect to a computer then Iphone3G is restarting every 4 minutes. Is wery wierd. And the golden question is: "Is someone out there that has a solution for this kind of the problem or Does someone had any problem of this kind".

P.S.
I've tried to restore to different firmwares 2.0-2.2 and always is the same problem.

fancyvpp · 01-27-2009, 04:52

my 3g iphone is water damaged and i cleaned it but the touch screen does not work. i tried the screen on a diffrent phone and it works and the other display does not work on the water damage phone either. any suggestions.
also the other problem is camera does not work. i tried the dfu restore and also tried another camera but still does not work. any help is greatly appreciated.

dubaimobiles · 01-27-2009, 13:17

No reply yet ?? Why is it written in 24 Hrs ??

ZIYAAD STRYKER · 01-27-2009, 16:36

cannot restore firmware on iphone 2g 2.0.2 after dfu mode... error 1601.. help????

01-16-2009, 13:43	#63 (permalink)
s jaya shankar Junior Member Join Date: Oct 2007 Posts: 2 Member: 607977 Status: Offline Thanks Meter: 0	i phone 3g spk problem hi every body im regular visitor of ur site its superb & ultimate give me some sugession how to rectifi it spk strip is gone i need new strip kindly do the needful

01-17-2009, 15:24	#64 (permalink)
8051 Freak Poster Join Date: Sep 2002 Location: No Man's Land Posts: 461 Member: 15858 Status: Offline Thanks Meter: 10	Iphone 2G phone mode Touchscreen Problem. Hi, Everythig is working well problem is only in phone mode (and sms ) when tried to touch sms it returns to main menu same problem when i tried touch numbers 123... ( to make call ) it returns to main menu. In other case the touchscreen works well even numbers. br

01-22-2009, 13:11	#69 (permalink)
jonny walker Junior Member Join Date: Dec 2008 Posts: 6 Member: 924643 Status: Offline Thanks Meter: 1	Iphone 3G Water damage! Hi I have a Iphone 3G Water damage, problem is LCD only white screen....component damage LCD is OK I need schematic! Please Help me!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
All Blackberry Hardware and Software Solution	youssef01	BlackBerry (RIM)	34	11-01-2012 17:31
I need DVD player hardware and software solution site	..::MOBILES::..	GSM Mobile Links	0	04-05-2009 15:49
O2 Hardware and Software solutions	Eagle7	Various	2	04-14-2006 12:47

01-15-2009, 17:48	#62 (permalink)
dollyb Freak Poster Join Date: Sep 2000 Location: Hungary Age: 45 Posts: 183 Member: 2208 Status: Offline Thanks Meter: 1	hello i have a 2g iphone, it says no sim. it was broken inside the sim opening tool. a part of them was in the phone. i remove it, but same problem. thx wbr dollyb

01-19-2009, 11:33	#68 (permalink)
iku911 Junior Member Join Date: Jan 2009 Posts: 3 Member: 947827 Status: Offline Thanks Meter: 6	hey u all I've Iphone 3G when i restore firmware after compliting loading firmware its show err 1002 ; wht should i do u ppl help me plz..

01-25-2009, 06:47	#70 (permalink)
iku911 Junior Member Join Date: Jan 2009 Posts: 3 Member: 947827 Status: Offline Thanks Meter: 6	hey u all ... i've a iphone old version after few mints its restats.. sometime it switch off... any soluation....plz help me..

01-26-2009, 00:53	#71 (permalink)
dubaimobiles Freak Poster Join Date: Nov 2008 Location: Dubai Posts: 185 Member: 908655 Status: Offline Thanks Meter: 393	Hello, I have an iPhone 3G Factory Unlocked. Phone works fine, I can get network, recieve calls and sms. The earphone does not work when a call comes. Loud Speaker works with iPod and other applications. Only problem when a call comes, the earphone does not work, when i keep it on loud speaker it does not work. If I attach a headphone still it does not work. I dont think there is any problem with the earphone, speaker and headphones. It only comes when a call comes are goes. How do I solve this, someone told me its the boards fault. can you tell me what exactly is wrong with the board and do can I overcome this. Regards DM

01-27-2009, 04:52	#73 (permalink)
fancyvpp Freak Poster Join Date: Dec 2003 Location: India Age: 45 Posts: 101 Member: 47921 Status: Offline Thanks Meter: 2	my 3g iphone is water damaged and i cleaned it but the touch screen does not work. i tried the screen on a diffrent phone and it works and the other display does not work on the water damage phone either. any suggestions. also the other problem is camera does not work. i tried the dfu restore and also tried another camera but still does not work. any help is greatly appreciated.

01-27-2009, 13:17	#74 (permalink)
dubaimobiles Freak Poster Join Date: Nov 2008 Location: Dubai Posts: 185 Member: 908655 Status: Offline Thanks Meter: 393	No reply yet ?? Why is it written in 24 Hrs ??

01-27-2009, 16:36	#75 (permalink)
ZIYAAD STRYKER No Life Poster Join Date: Aug 2005 Posts: 3,187 Member: 175945 Status: Offline Sonork: ziiyyaad Thanks Meter: 703	cannot restore firmware on iphone 2g 2.0.2 after dfu mode... error 1601.. help????