please helpme i9000 no resurrection - GSM-Forum

jorgep31 · 05-31-2011, 19:42

here this logs

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung I9000]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data checksum.

thx

medhat_iglesias · 05-31-2011, 22:04

try to update your box firmware version and check TCK Frequency 8 MHz

connexion2005 · 06-01-2011, 18:21

De-solder one wire at a time to narrow down which is causing the issue. Normally it's NRST or Ground. In all cases that's almost always a connection issue between the wires and the pcb.

05-31-2011, 19:42	#1 (permalink)
jorgep31 Major Poster Join Date: Mar 2006 Posts: 44 Member: 252682 Status: Offline Thanks Meter: 8	please helpme i9000 no resurrection here this logs Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.18, JTAG Manager Version: 1.29 Selected Resurrector: [Samsung I9000] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...FAILED ERROR: Wrong DCC data checksum. thx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-08-2017 13:21
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Sp unlocking sim - if you can get or sell please let me know	andrew bennett	Wanted Products	1	09-24-1999 08:43
no one can unlock 6110 05.40 25-5-99	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	09-22-1999 08:03

05-31-2011, 22:04	#2 (permalink)
medhat_iglesias Insane Poster Join Date: Nov 2007 Posts: 74 Member: 640636 Status: Offline Thanks Meter: 4	try to update your box firmware version and check TCK Frequency 8 MHz

06-01-2011, 18:21	#3 (permalink)
connexion2005 Freak Poster Join Date: Jan 2011 Posts: 355 Member: 1501506 Status: Offline Thanks Meter: 47	De-solder one wire at a time to narrow down which is causing the issue. Normally it's NRST or Ground. In all cases that's almost always a connection issue between the wires and the pcb.