▒▒▒ Create Your Repair Pack Videos ▒▒▒

[~AKSingh~]

Originally Posted by MOHIT_THAREJA

i have zte s183 can i make a custom pkg

becaue in riff s183 dll cant work

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [ZTE S183 V1.0.5162.54298]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x017E/0x0065 (16MB)
WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x017E/0x0063

meet me on yahoo/icq
for our riff customer we il post the solution after test

br,

[aman_aks87]

thanks for giving this information..

[haroon008]

Zte s183 reliance dead
How recover with riff

[haroon008]

After crate repair pack
Write dump dump zte riliane s183
Same error

[Syifa.Cell]

Why when I create repair pack, always conect to the update, and then always failed.please some body or team help me, I want to create repair pack for new phone who is not yet support from server.

[tukara]

Originally Posted by ~AKSingh~

Here goes a easy video to create your own

Riff repair Pack



RIFF REPAIR PACK



critics invited



br,

Hello First of all thanks for the video but I think is incomplete. I dont know how to find the JTAG point on any phone. I dont know how to identify if some phone is supported or not and I dont even know how to make the full or partial dump for the first time without any info from the masters like you, legija or babak nuri so I think you should upload a video with that info too PLEASE. thanks in advance.

[wrecker01]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [S133 V1.02 by <kosovo37>]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x122C80E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x122C80E1: Qualcomm QSC1110, H/W Rev. #1

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [S133 V1.02 by <kosovo37>]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45

[N.I.T.]

hello sir need help in s7562
nitinwadhwa_nit: i have s7562 dead after flash,i allready tried rescuration after it not able to come in download mode,i also tried repair pack but after it when i trying to power on it has only viberation not going in download mode,plz help me soon

[Mani233]

Originally Posted by ~AKSingh~

USB Modem ZTE AC8720 TATA

USBMODEM AC8720

paste this pack in "RIFF Box JTAG Manager\RepairPacks" directory

br,

i download this repair pack and paste into Repairpacks directory

but give error repair pack not accepted.'WHAT TO DO PLEASE HELP

[NUSAR]

Originally Posted by ~AKSingh~

Here goes a easy video to create your own
Riff repair Pack

RIFF REPAIR PACK

critics invited

br,

reupload the link please?

[NUSAR]

where is the video, why i can't see it??

[modchipx]

Originally Posted by ~AKSingh~

Here goes a easy video to create your own
Riff repair Pack

RIFF REPAIR PACK

critics invited

br,

Anyone has a copy of the video?
TY

[~AKSingh~]

Originally Posted by modchipx

Anyone has a copy of the video?
TY

Rectification in procedure !

Br,

[Drims75]

How to make a dll? How to make a dll?